Compaq 6930p: Bios is damaged
Modules of memory on my laptop that I must have created the audit a static thrust because it starts more all I get on screen is a selected message "application HP BIOS is damaged or missing. Please install the application and try again.
But if it all ends, I don't have the recovery key for this PC because it was bought second-hand and the previous owner didn't either.
I do not have the bitlocker recovery key identification, but here too, I have a problem typing as to type the numbers is no problem, but the letters will not accept the program I do not know why.
I also realized an auto recfovery repair pushy, but also, this failed to materialize
If someone could help me further he would be greatly appreciated
Hello @dieselman13 ,
To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.
Even if it is a Commercial product, I recommend to restore the default settings of the BIOS with this document by selecting the reload the default BIOS settings. This will have the BIOS check the connected equipment.
Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.
Here is a document on the computer does not start.
Thank you.
Tags: Notebooks
Similar Questions
-
I get a message - block 1 BIOS is damaged, please call your service
Hello!
I have this message 'Block 1 BIOS is damaged, please contact the repairman' when I start my PC...
What it means?
TX
Hello
I don't know the exact meaning of this message, but I think that you need to reinstall the BIOS.
Good bye
-
Satellite P300 (PSPC4E) - BIOS is damaged
I have some problems with my Toshiba Satellite P300 (PSPC4E).
The BIOS is damaged and I am trying to get it back.I disconnected the battery, HDD and DVD.
I managed to create a USB startup disk using the USB HP and CrisDisk.
It was empty after I run it. I copied the three files into it, PHLASH16. EXE, Autoexec.bat and my laptops bios, named bios.wph (version 4.20).
CrisDisk using the required files are transferred automatically.
I tried plant key combinations, following the instructions of starting (USB->-> start button / stop power cord), such as the FN/WIN + B / F, FN/WIN + ESC.When I boot with FN/WIN + B / F, it starts only upward 'normally', all the lights on and the screen remains black. USB is not flash or anything.
Using FN + ESC is another story, well that without LEDs light up, except for the power button.
The USB flashes, for a few seconds, and shortly after, the laptop starts to beep.
When I say beep, it really will beep, loud and clear that h * l! 1 long beep 2 short beeps, who will be permanently.I left it for about 10-15 minutes, but nothing happened. The tones were really strong, so I stopped it.
I tried to make the combination of keys without connecting to USB, and it did the same thing, 1 long + 2 beeps.So, I'm doing something wrong here?
Also, I wonder if it is possible to reduce the volume of the beeps.Would be really grateful for any help I can get.
Hi mate
I found another thread interesting here in the forum are contiguous similar question.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395Maybe you could try the workaround posted by user ale210.
But if it does not, you will need a help from a specialist like Toshiba service technician. -
EliteBook 6930p: elitebook 6930p BIOS cannot detect the wlan.
Hello, after that new bios update ATI F.20 my laptop cannot detect wlan. In the bios it shows no. DAMAGE. Please help me.
Hello @KipsasLTD
Thanks for posting on the HP Forums.
To get your question more than exhibition I suggest you post in the trade forums since the Elitebook 6930p is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE
Support of your product page can be useful in the meantime: HP EliteBook Notebook PC 6930p
I hope this helps!
-
HP Elitebook 6930p BIOS password?
Hello REO51ST,
Can you help me to recover the default password of BIOS for a HP Elitebook 6930p? I have the laptop if you need any additional information.
Thanks in advance!
AJ
Contact HP.
http://welcome.HP.com/country/W1/en/contact_us.html
When you talk to the rep ask HP to intensify your service request.
Or download these files.
https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0
Insert a clean USB flash drive.
Then run USB Image tool.
Choose the flash drive, and then click RESTORE.
Remove the flash drive after the restore.
Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.
At C:\OUTPUT, type CD... "And then press ENTER.
HPBR of type "and then press ENTER.
First thing is to save your settings.
Select 3 # re-program.
Press "S" to save the system information.
Type HPBR and press ENTER.
Select 'of FIRST BROADCAST.
Then select the model.
After the restart to repeat, same as above but this time SELECT 'SECOND RUN.
Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."
http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html
More details here.
http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Compaq CQ58: bios password
pls help, bios password for compaq CQ58. code 85654554. Thank you
Enter 30732590
Kind regards
DP - K
-
BIOS (Block1) damaged - Satellite Pro 6000 - WinXP
Hello
I tried to update my BIOS from Version 1.3 to 1.6. During this process my child presses the power button. The result is: I am not able to boot the machine. It asks me for a disc of maintenance, because the BIOS (Block1) is damaged. I have no records of maintenance, only some recovery CD they don't work and there is no file *.rom on them.
So, what can I do? Thanks in advance for your answers!
MacDear Marcus,
I think you're right, the nightmare of anyone of flashing BIOS/PHONE/CD-PLAYER/I YOU-NAME-IT she lives today. You already know everything, it's never good to get either a bad BIOS, or a loss of power during this procedure.
Every newer BIOS has a protection mechanism which means that even in the case of an incomplete process of flashing, the area responsible for in the BIOS flash for the upgrade is NEVER DELETED. This means that you can download a firmware on your BIOS even if the procedure went wrong last time.
This "flash emergency programme" will automatically launch out of the BIOS when you turn on your laptop and are looking for a *. ROM file on your floppy drive. The floppy disk does not need to be bootable, just it should include this one required file.I guess, the required ROM file is the same .bin file, which comes with your regularly updated BIOS... just rename in the ROM of the extension, but since I can't take the risk of provide you false information, I suggest you have your laptop repaired by a Toshiba authorized service provider.
There are just TOO MANY things that can hurt, especially if it's the last 'easy' way (without equipment) to get your laptop working again after a BIOS update failed.
Kind regards
chain -
Satellite 1800-100: message - Bios block3 damaged
When my Toshiba Satellite 1800-100 startup appears «block3 damaged, please call military...» ». The CPU, memory, RTC battery, main battery, hard disk, power, work correctly.
I tried to update the bios of dk using the F12 key without errors, but the message is the same at the start.
Please, help me.Hello
There is nothing wrong with the hardware of the laptop but only with the BIOS!
I read a few threads on a similar BIOS problem and it seems the BIOS has to be flashed again on the special way!It should be a message sayingPlace a maintenance disk in the drive and press on enter.
Am I wrong?
Well, this disc of maintenance is needed to repair the BIOS and only the authorized service provider could do that!In my opinion, you should contact the ASP in your country for assistance!
PS; I found this very interesting forum thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19801&MessageID=72596It is perhaps useful to s
-
Compaq presario cq57 with win7 home premium 64 with update of the bios f 47 to f 48
What happens when two hard disks that have two operating systems
Like windows 7 home premium 64 and windows 7 ultimate 64Home premium 64 has updated the bios f 47 to f 48
but ultimate win7 is not only the bios f47What happens if I change the hard drive?
Thank you.
Peter
Hi Peter,.
A bios update is written for a chip on the system, not the OS map, then the two operating systems will see the same version of the bios.
Kind regards
DP - K
-
Compaq cq58: bios administrator password
Nice day
I have a compaq cq58.
I need the bios administrator password.
The error code is 70769099.
Please help.
Thank youHello
Enter 65641019
Kind regards
DP - K
-
Compaq cq10 bios password reset
Hello I have a compaq with a bios lock cq10
Series No.:[personal information deleted]
Any help would be great
Thank you
Hello
If the number you posted is the same as the "stop code" displayed after 3 erroneous seizures, then try to enter:
e9l11oqstk (the 3rd character is a lowercase L)
Kind regards
DP - K
-
HP Compaq 2510p Bios update failure (stuck in an eternal loop))
Hello
I wonder if anyone can advise me please?
I have a HP Compaq 2510p laptop that starts, displays this error message:
"Your Bios did not complete the update"
A few seconds later late in goes to the HP Invent screen. and then again the previous error message. These two screens cycle constantly and there is not only one key that I can use to access the bios settings.
Presseing F9, F10, F12 or F-everything works. No key command does not work. Can I not boot from the internal drive, CD, USB etc.
How can I regain access to this faulty machine to restore or repair the bios please?
Here is a link to the images of the two alternating screens that I'm stuck:
http://postimg.org/Gallery/2oa73dj8q/
P.S. This thread has been moved from Windows Vista laptop - Envy, Pavilion, Presario. -Hp moderator of the Forum
Hello:
It seems that you have a problem similar to this model (which is basically the same model as yours, except with a 14.1 "display).
/T5/notebook-HP-ProBook-ZBook/issue-with-BIOS-update-on-Compaq-6910p/m-p/2361103#M165620
Your situation sounds a little more serious as mine was, because I (another one on this thread) could not get into windows, and flash back to F.17.
-
HP Compaq cq58: Bios password
Hello
MY laptop HP Compaq cq58 has a power on password I want to remove so that I can use the laptop but when I try to enter the bios it will not accept the password.
After that 3 unsuccessful attempts, it gives me the following code 85136998
any help will be appreciated
Enter 30894318
Kind regards
DP - K
-
Compaq cq58: bios password locked
I'm locked out compaq CQ58
Laptop looking for a bios password and give this code: 65487331
Hello
Enter: 70585917
Kind regards
DP - K
-
HP Compaq CQ10: HP Compaq CQ10 Bios password reset code
Hi, my HP Compaq CQ10 shows a fatal error of CNU0022SF2 code, could you please tell me the password to access the bios etc.
Thank you
Hello
Sound: e9l1177n87
Maybe you are looking for
-
TB change the sender name to my name to email classic.Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is cha
-
While reading instructions to place a password on my laptop - items refer to the password in a place and admin code in another - they are both the same? Is - this password identical to Admin? I know that my arm IS different from MY apple ID. Thanks,
-
Tecra 520 cdt - Manual of use of need
I just received a computer laptop tecra 520 cdt.I was wondering if anyone has a manual or any info on this laptop - it's my 1st laptop I've ever owned. Thank you very much
-
His HP Pavilion laptop does not work
Hello Recently, the sound became unrepsonsive and speakers won't play any sound on my laptop unless I have restart every time I use it after that he went to sleep. In addition, the orange button mute button does not light up when the speakers do not
-
Do not have the permission to a folder, but I am the admin. (win7)
Hey, I get these errors when you try to copy into the folder D:\Program Files 2 and if I try to delete anything from him, he said 'you must be authorized to perform this action. " Even though I am the administrator of the computer it still doesn't le