Compaq 8710p: base system device problem

Similar Questions

• EliteBook 8440p: Base system device problems

  I'm having a problem with the Base system device PCI bus 69, device 6, function 2 (code 28) on my Elitebook 8440p.

  I was working on my laptop and my Wifi says "no connection available. I made the necessary troubleshooting and landed on it.

  I've updated the paks, individually made chip so that other device drivers are updated and the system indicates that this driver is not available when I try to update. Any suggestions?

  Hello:

  You have need of this driver for the... base system device is for the reader who is not related to the Wireless does not.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873&swItemId=ob_79317_2&swEnvOid=4059

  If the Wireless does not work and you need a driver for it, there will be a labeled device network controller where you see the listed base system device.

• X 220 base system device problem

  Hello

  I am trying to install the drivers for my Lenovo X 220 on Windows 7 x 64.

  I managed to install all except for the Base system device.

  Could you please watch?

  Thank you.

  I enclose the ID of the hardware for this device:

  

  I think it's the Ricoh card reader:

  Driver card reader

• HP dv6810us 'Base system device' problems AND MORE!

  Hello!

  I have a problem I have been struggling with for several months now. I do not know what is happening and am puzzled because. I will describe what is happening as well as I can and expect an answer.

  My laptop is a:

  Laptop HP Pavilion Entertainment PC model DV6810us. I run Vista, of course.

  I had this laptop for my 16th birthday a year and half ago. As expected, it worked like a power all the time. Around my 17th birthday, he began to have some overheating problems. Attaches easily with some canned air.

  However, soon after, I started to have some other, more distinct problems. The first was, on start-up, I've received an error message indicating that the module of HPwinmx (sp?) had stopped working. A few weeks later, I started to receive alerts from Windows with "new hardware found". Specifically, three system of Base and an IEEE 1394 controller devices. At the same time as these physical alerts, my ports series and s-video stopped working, my cd player, as well as my multicard reader.

  At this point, all attempts to reinstall the drivers for those devices were unsuccessful.

  Needless to say I was due for a while on what was still working. There is not enough money to get the extract. Sometimes, at the start, all these devices would be online for no apparent reason. I reasoned that the material must be end - no melted connections or shorted wires. It must be in the drivers.

  Last Thursday, my laptop has informed me that I had no speakers, microphone or headphone jack. Being a music and a drug of Hulu, which could not support. I decided the best way to solve this problem would be to back up my files to an external drive and wipe my laptop to a factory state using System Restore HP. Well, I just finished that about 01:30. And now, nothing, and I mean absolutely nothing changed. Same features, same problems, etc, etc.

  I cracked her open to find internal damage. I don't see nothing, for what it's worth. =/. A crossed the CMOS and BIOS for info. No change. However, when I look at my startup journal, he told me what PCI bus are turning back errors. I have been unable to pause and see what he said, and the information was retracted before I could read.

  I couldn't be more confused about what is happening here.

  For the love of God and all that is holy, just WHAT is going on here?

  ---------

  For reference, here are the details on errors for three basic system devices:

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Most certainly. The cost of a new motherboard is going to be at least $ 250 for you and this is simply too much to spend for a repair. Your parents may think differently. A new motherboard is about $150 online (not of HP they charge more than double that) and labor is about $ 100 to $ 150. You would need to find a reliable repairperson or there are several good online, too.

• Compaq presario v 3780TU: Base System Device Driver missing

  product compaq presario v 3780TU

  problem - the two driver missing basic systems, audio device does not not only integrated speakers work not, works of headphones

  problem when I upgraded to the Windows OS 10

  first base h/w device id is

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  ID of second base system device h/w

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  driver audio h/w id is

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD & REV_1000
  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD

  Please help solve

  Hello:

  For basic system devices, you need this driver...

  This package contains the driver and the host controller Ricoh 5-in-1 card reader for laptops models and operating systems.

  File name: sp37614.exe

  For the other device you need this driver...

  This package contains the driver for the Conexant HDAUDIO Soft Data Fax Modem with SmartCP (CX20548) in the notebook models and operating systems. This driver enables the remote access feature and provides a UI for formodem.

  File name: sp37817.exe

• problem with the base system device

  Hello! I have HP pavilion dv7-2250em, and I have a problem with the base system device. What should I do?

  Hello

  Maybe that's a problem with the card reader driver.  Try to download and install the driver from the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45046.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Device base system & coprocessor problem with driver Windows 7 - Pavilion dv9720us

  I have a HP Pavilion dv9720us which was very glitch with Vista 32 bit.  After saving all on an external hard drive from Seagate Replica, I did a clean install of Windows 7 64-bit.  Everything seems to work, but I get error messages stating that the x 2 Base system device is not working because it doesn't have the correct driver, the coprocessor is also mentioned as not having not the correct driver.  All 3 of these devices are listed in the other devices category in Device Manager.   In addition, my laptop has 4 GB of RAM and still Windows 7 recognizes only 2 GB.  Help!  I deliberately enhanced to reduce the glitchy Vista answers. I could go on Windows 7 32 bit, but I don't know who's going to solve all my problems.

  Thank you very much!

  Kathy

  Remove your Ram and install it again.

  Notes:

  1. ensure that, then you have no battery or ac adapter connected to your laptop.

  2 Manufacter installed in this model 2048 MB of Ram (2 GB), so if you have not added 2 GB on your own all is ok.

  There will always be problems and your really have 4 GB:

  You check Ram with Memtest86 + or GoldMemory. Just burn it on CD *.iso file and run the test. You may need to change the boot sequence in the Bios (to get the BIOS press F10 boot).

  Message edited by Daniel_Potyrala on 10/30/2009 12:57

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• HP Pavilion dv7-3190em problems with volume band and "base system device" in Device Manager

  Hello

  I just installed Win 7 (64-bit) and my volume control does not work properly. It does not turn the sound up and down, but the blue band is not displayed on the screen.

  In addition, I seem to have a device or devices for which there is no drivers apparently. They are listed as "base system device" x 3 in Device Manager and "unknown device" x 1.

  Thanks for any help.

  Good Hoga

  Hello

  bonhoga wrote:

  Now, I just need to take care of the volume Strip.

  Download and install:

  MediaSmart SmartMenu here (version 3.1.2.2 for 32/64-bit Win7)

  Before installing this software, that you must have installed at least a MediaSmart package software. The best choice will be in my opinion:

  MediaSmart DVD here (version 4.1.4328 for 32/64-bit Win7)

  If you do not use any additional software you can use another product that is:

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what can be done with the 3VRX software.

• Win 7 64-bit HP Pavillion DV9500 problems driver base system device.

  So I upgraded my laptop Windows 7 64 bit and I have been able to get everything works except that I have 2 base system devices listed in Device Manager in need of work.  My SN is CNF7415FT1 if that helps any.  I'm not sure what are these 2 devices, as I have not noticed something doesn't work yet.

  What the device is.

  Driver - storage Date Version previous size
  "" Ricoh 5-1 Card Reader Driver 11-2007 3.52.02 has ' Version: 2.99 M

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&DLC=en&cc=us&product=3255934&lang=en

  The driver is for Win Vista. I don't know if it will install on Windows 7.

• Presario V3440TU - missing Base system device driver

  Hello

  I recently upgraded my system from XP to Win 7 and I was unable to find the drivers for the two "base system devices. I'm on a Compaq Presario V3440TU and my processor is a Core 2 Duo T5300 is Intel 945GM chipset.

  Missing drivers are likely to the Ricoh card reader in my laptop, because I remember facing the same problem while re-installation of XP once and ask for help here.

  I would be really grateful if someone could point me to the drivers of the hardware ID:

  1.

  PCI VEN_1180 & DEV_0592 & SUBSYS_30B2103C & REV_0A
  PCI VEN_1180 & DEV_0592 & SUBSYS_30B2103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  2.

  PCI VEN_1180 & DEV_0843 & SUBSYS_30B2103C & REV_01
  PCI VEN_1180 & DEV_0843 & SUBSYS_30B2103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  Thank you!

  You are the very welcome.

  Once you have installed W7, you have lost the ability to update the BIOS.

  All the updates of BIOS for your model series are written for Windows Vista.

  Attempt to update the BIOS while running Windows 7 is most likely able to make your laptop unusable afterwards.

  I don't see that it was necessary to do anyway.

• For SP 2100 base system device driver

  I do a bit of volunteer work at a local school and a teacher uses a Toshiba Satellite Pro 2100. There is an entry in for a 'Base system device' Device Manager, but it doesn't have a driver installed. I have no idea what this is referring to and if I remove and refresh it simply returns to the list that is unable to find a suitable driver.

  I don't have the drivers disk for the laptop than the previous company that they paid because IT supports he did not leave when their contract expired, although he belonged to the school.

  Can someone tell me what device it refers to and what driver I need to download? Thank you. I noticed this problem while difficulties to get a pcmcia wireless card works on the system, it does not appear to be a problem, but I don't like the idea of a device without driver.

  Hello

  Go to http://eu.computers.toshiba-europe.com then download driver! There are all the drivers and tools for the SP2100 available!

  Verify that the drivers are still installed and download the missing!

  You can order a new CD tools & utilities (contains drivers) each partner Service Toshiba!

  Goodbye, TOK

• Windows 7 RC - Portege M200 - Base system device

  Windows 7 RC works well on my M200, but Device Manager is showing a "other device" without driver loaded. He is described as "Base system device" and properties indicates its location as "PCI Bus 2, device 13, function 0'.

  I tried online searches and navigation within my M200 for a driver without success. I read elsewhere in these forums that the 'Base system device' could be tied up with the SD utilities. I downloaded a new copy of the SD utilities and installed them, but still no luck. Certainly, the SD format utility does not work - it recognizes not only an SD card in inserted - so maybe the necessary revision of SD utilities for Windows 7.

  Not a major problem as I can format SD cards elsewhere, but it would be nice to receive a certificate of good health from Device Manager.

  Has anyone another execution in this problem and even better, found a solution?

  Keith Woolf

  You are right about revision. All the drivers, tools and utilities for Windows 7 must be designed and tested before they are offered for download. As you know Windows 7 is not yet on the market and the public support can not be started. With first notebook comes with Windows 7 Toshiba Toshiba will be support for the new site and some old models of laptops.

  Sorry but there is nothing you can do about it.

• HDX 16 t 1200: upgrade Windows 10: Base system device

  Hello

  First of all, let me say that the upgrade of Windows 10 (I did a clean install) seems to work fine on my HDX 16.

  I have a few device drivers, I and Microsoft cannot understand. When I make upward device under other devices Manager, I have:

  >? Another device

  - ?! System device base (calling it a 1)

  - ?! (2) base system device

  - ?! Device base system (3)

  - ?! Unknown device (4)

  Properties:

  1 device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 1. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2382 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 01E4 requires installation.

  2. Device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 4. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2384 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 04E4 requires installation. (the only difference is location and event-Info)

  3 bus PCI 6, device 0, function 3

  Events-info: device PCI\VEN_197B & DEV_2383 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 03E4 requires installation.

  4 device Type: other devices; Manufacturer: Unknown; Location: On system compatible ACPI Microsoft; Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Details-value: ACPI\HPQ0004\2 & DABA3FF & 1

  Events-info: device ACPI\HPQ0004\2 & daba3ff & 1 requires installation.

  I found similar problems of pilot in the forum on other HP laptops, but nothing on my HDX 16 t 1200.

  Thanks in advance for any help.

  Hello:

  You need these drivers...

  Base system devices:

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp42446.exe

  Unknown device:

  This package provides the HP 3D DriveGuard for laptops software
  models that run an operating system supported. HP 3D DriveGuard protects the hard drive of "parking the heads ' if the cell phone is accidentally deleted or is suddenly hit by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• HP ProBook s 4730: lack of Base system device drivers

  Hello world!

  A few days ago I received an error message that my device Base and an unidentified device system no longer have the drivers installed for them (Code 28). This can happen after my last update of Windows, but I'm not too sure. When I try to update the drivers of the device for each Device Manager, Windows cannot find a driver for the device.
  
  These are devices that are affected (not sure if you need the hardware ID, but I included them):

  Base system device
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880
  
  Unidentified device
  USB\VID_138A & PID_003C & REV_0086
  USB\VID_138A & PID_003C
  
  Don't know if it is also related, but my Standard VGA Graphics Adapter is also having similar problem and cannot start (Code 10):

  PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C & REV_00
  PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C
  PCI\VEN_1002 & DEV_6760 & CC_030000
  PCI\VEN_1002 & DEV_6760 & CC_0300
  
  I use Windows 7 Home Premium (64-bit).
  
  I saw that I can download the drivers from the HP site, but I'm not really sure which ones do I need to download. Some people recommend that you download the chipset, the audio media and network card drivers for my laptop to try to solve the problem.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5060894 & swLangOid = 8 & swEnvOid = 4058

  I can compare the drivers with the names of device in Device Manager, if that's the best way to go about it. I wanted to just a few tips on the best thing to do.
  
  I have some knowledge of the software, but I don't mess with hardware very much, answers in layman's terms would be greatly appreciated!
  
  Thanks for your time. If you need some info on my ProBook, let me know.

  Hello:

  You need these drivers...

  Base system device:

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe

  Unidentified device:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59624.exe

  Standard VGA Graphics adapt:

  This package provides the AMD video drivers, driver audio Control Panel and HD for laptops taken in charge who are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55947.exe