Compaq CQ1-2025: updated memory

Similar Questions

• Someone at - it sucsesfully updated memory? TouchSmart 1 i5 or i7?

  Someone at - it sucsesfully updated memory? TouchSmart 1 i5 or i7?

  Asll read the post about 200 or 204 pins seems still nobody ever sucsesfully upgraded memory or what type they were using 200 or 204 pins. You are looking for a definitive answer so I don't what to buy and Yes already called technical support have all the specs on memory, but tech support said machine is not extensible after hard to answer asn

  I found a supplier who sells guaranteed compatible for this PC memory.

  Their web page says it's 204 pins. Maximum RAM is 16 GB with a 64-bit operating system.

• Wireless LAN card seems to be missing on my Compaq Presario all-in-One CQ1 - 2025 Office PC.

  I can't find my wireless anywhere LAN card. I had until I changed to October last IP and now - no wireless icon. I have reset my pc as long as you plant and still no wifi! Help!

  Hello cbnolen,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your wireless card disappeared and does not always show after doing a recovery of the plant on your Compaq Presario CQ1 all-in-one - PC of office of 2025. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.
  
  I want to thank you for display on the HP Forums. Have a great day!

• HP Compaq 8100 Elite CMT: Updated memory 8100 Elite CMT with 2x4gb TwinMos 512 x 8

  Hello. I'm new here.

  Of after the plug technical QuickSpecs, I recently bought 2 x 4 GB of "TwinMos PC3 10600 4 GB DDR3 1333 Mhz CL9 U-DIMM ' memory. The chip configuration is 512 x 8 single sided. When I put the memory inside, my PC will boot only until the Windows logo and keeps on rebooting. I tried the two modules together and separately, black fill slot DIMM1 still. But the problem persists.

  After much research on the internet, I found the idea that it could be due to the configuration of the chip 512 x 8.

  Is there such a question? How can I solve this problem. I plan to uprade max 16 GB, and it's the only 4 GB DDR3 1333 MHz available here.

  Thank you for your time.

  Hello:

  It's the memory that I used on my 8000 Elite that uses the same specification of memory...

  This memory has 8 small black chips on each side of the chessboard (16 in total).

  http://www.Newegg.com/product/product.aspx?item=N82E16820231422

  I would say that the memory you bought is too high a density for the PC to manage.

  The memory I bought works fine in my box.

• Compaq Presario Cq1-2025. These have a diet?

  Have one of these this power just stopped.  I have a little green light in the back, but none of the sounds or beeps or images.  On a regular desktop computer I would just replace the power supply and I'd be ready to go, but I don't think that they have a separate PS and more like a laptop overgrown, with a piece of the motherboard dedicated to provide power.

  Is this a candidate for the local recycling bin?

  Hello

  It IS the power supply. As in my first response, it uses a similar diet with a laptop.

  Kind regards.

• Compaq Presario SG2025IL: updating graphics card

  I have a Compaq Presario SR2025IL, which was used a computer to type. Now, he was bequeathed to me and I want to update its graphics to make a gaming computer. Any suggestions for a graphics card?

  Thank you for the additional information and the link with your computer's specifications, @NeelCool.

  Before making any recommendations, I want you to know that your computer is not simply cabable of being a machine good game.  The most important thing against the fact that the maximum memory is only 2 GB, DDR.  It is simply not enough to work with recent intensive video games.  In addition, the only expansion slots are PCI and AGP.  They are very slow.  I'd rather see you save money and buy a newer computer when you can afford it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Compaq Presario SR5506F: update BIOS of BACK command line?

  Hello

  I would like to be able to Flash the BIOS to the boot prompt, or with a USB/CD/DVD based tool. I can't open any OS even from live DVD.

  My Presario SR5507F came originally with Vista installed, but over the years, it has been upgraded to Windows 8.1. He gave us many years of reliable service, but sometimes the last fall the PC began to experience some powerdowns and seemingly random reboots.

  Things get pregressively worse until the PC was unusable. He would go for 15 or 20 minutes and then restart. The trouble began shortly after a Windows Update, so I thought it was a problem of update patch or driver. I tried return that a withdrawal patches nothing helps. I also tried to install Ubuntu and Fedora, but they have the same problems. Fedora is worse than Ubuntu, however. I tried to reinstall Windows 8.1, then 7, and finally the original Vista operating system 32-bit, but all the Windows installations fail at some point during the installation drivers. The computer passes just a restart endless cycle and cannot install Windows.

  I performed memory tests, but they all go and I use a text based operating system, such as BACK.

  I tried to reflash the BIOS, thinking he was damaged in one of the restarts, but since I can't install any version of Windows, the BIOS flash tools refuse to work. I need to be able to Flash the BIOS from the prompt at startup or DOS command. Is there such a tool from Compaq/HP?

  Thank you!

  The BIOS file is located on THIS PAGE and is registered as a

  Card BIOS update mother MCP61PM-HM

• Compaq CQ58-bf9WM: upgrade memory for Compaq CQ58

  Compaq CQ58-bf9WM came with 2 GB of memory and 1 slot.  I've recently updated 8 to 8.1 windows (I think its 64-bit, but it's the original operating system updated) and AMD inside.  What is the maxium memory slot amount single will execept.  Care say he'll take 8 GB also said there are 2 memory slots (2 blocks of 1), but there is only one (based on Visual information items).  Please notify.

  Hey @fridge411,

  I recommend always go against what is in your textbook as recommended. But sometimes these things just work without any problem. I wouldn't you not waste your money.

  Thank you.

• Compaq Presario CQ61: BSOD - memory management error

  Hello

  So, I have my other laptop, Compaq Presario CQ61. For like 5 or 6 months I had a lot of problems with it, like freezes, BSOD-s and not to forget that convenience store was down. I transferred all personal files on the external HARD disk and decided to reinstall Windows (7 - legal copy), hoping that the problem will be solved, but in vain. Finally, I installed Windows 8 Pro, because as said in the forums, people, it may be a problem with the installation disc. For like 4-5 days my HP laptop was running well, all the updates that are installed (haven't seen it lately), I just thought it was a miracle and my problem is solved. Today, he appeared. BSOD. After reinstall or to install both versions of Windows, I had, it is my belief that it is a hardware problem. I tried the memory management test and the result was something like "problems were found, contact your manufacturer. So my question is, is it a problem of RAM or a HARD drive? I've heard both versions, and if someone had in the past has the same symptoms as my laptop and he managed to cope, please enlighten me as well. Thanks in advance.

  Hi @Calin1 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your Compaq Presario CQ61 and works very well, and then get the BSOD and stop. I recommend to restore the default BIOS settings if you can get it to go to the screen. You could restore the BIOS with this document by selecting the reload the default BIOS settings. No restoration. Restore default BIOS is necessary because I think that this will solve the BSOD.

  Here is a link to solve the BSOD if the restoration of the BIOS does not help.

  If this does not help at the end of the document it tells you to do a test equipment.

  The hardware test indicates if any parts are missing or have problems.

  I hope this helps.

  Thank you.

• Update memory in pavilopn a1340n

  How difficult is to update Memo in my Pavilion a 1340n once I deleted the side panel

  Bernabe, it is not so difficult.  This is normally one of the first improvements carried out by most of the people.

  Here is a link to the pages 'Product card' for your computer:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=16905 & tmp_task = prodinfoCategory & LC = on & DLC = in & CC = US & Product = 1818054 & lang = in

  Also, here is a link to a page that will help you update:

  http://support.HP.com/us-en/document/bph03886

  Finally, here is a link to the website of "Crucial" and the memory of your computer:

  http://www.crucial.com/store/listparts.aspx?model=Pavilion%20a1340n

  I suggest you read all the information on the page and embedded links.  It will give you a wealth of information.

• Compaq 500 b (VS695UT): memory Compaq 500 b problem

  I'm sorry to 'beat a dead horse' in this question, but I'm frustrated.

  1. I have improved my Compaq 500 b microtour Windows 7 Pro for Windows 10 Pro.  Everything went well, and I appreciate it.  I currently use two modules of RAM of 2 GB for a total of 4 GB of RAM successfully.

  2. for the purpose of "improvement", I thought that I would be upgrading or increase my 8 GB RAM, installing two 4 Go PC3-10600 (1066 / 1333 Mhz) 240 pin, non - ECC memory bars.

  3. Once installed, the computer refuses to start, and I have a black screen.  I put back the original 4 GB of RAM in the computer, and it starts fine.  I made sure I had the latest and more great BIOS downloaded and installed.

  4. I tried upgrade memory once more, in vain.  I tried to replace a SINGLE module (6 GB of RAM total) without success.

  5. the 4 GB RAM that was originally here works very well. (I'm typing on this computer now).

  6. my thought is that: "even if I'm still in Windows 7 Pro; "I should have been able to spend 6 or 8 GB of RAM", right?

  7. the computer originally came with 2 GB of RAM, and I upgraded to 4 GB.  I read some of the older posts, and I think that I made sure that I use the correct RAM.

  8. ALTHOUGH; When I run a single module of 4 Go PC3-10600, the computer won't start or run correctly. SO I'm looking for advice.  Any thoughts?

  Hello:

  The quickspecs 500b at the link below show that the maximum memory is 2 x 2 GB.

  See page 4.

  http://h20195.www2.HP.com/v2/GetDocument.aspx?DocName=c04113766 & DOCTYPE = QuickSpecs & doclang = en_US & SearchQuery = & CC = UK & LC = in

  Now the way I interpret the Intel G41 chipset info from the link below... it seems to me that on PC with DDR3 memory, the max is 4 GB, and for the PC with DDR2 memory, the max is 8 GB.

  http://www.Intel.com/content/dam/www/public/us/en/documents/product-briefs/G41-chipset-brief.PDF

  Makes no sense to me, but I would say that since 2 x 4 GB does not work and the characteristics of HP say the max is 2 x 2 GB, and the way I read that Intel is to say, it's the reason why the memory does not work.

• HP Compaq laptop: windows update problems

  Hello

  Could someone help please, for the last few weeks where are updates of Windows security and I think that all is well I keep getting messages flashing up to say that updates could not be completed. This seems to be only on some of them, I'm not very tech savvy and have no idea how to do to fix this, it would be good if someone could tell me in simple terms how to overcome this problem.

  Thanks in advance

  John G

  Hi @Johnymac,

  Thank you for your response.

  What is your specific model of HP Compaq laptop?

  There is a link in my previous post to help you find this information.

  If you have a firewall (firewall of Windows example) make sure that Windows update is on the white list. You can also try disabling the firewall and retry the Windows Update to see if that helps.  If it do not forget to reactivate it later.

  Have you checked against viruses and malware?

  Microsoft offers also get help Windows 10.

  Microsoft Corporation / Customer Support

  1-800-642-7676

  Microsoft Support contact us

  Please keep me updated.

• HP Compaq 2510p Bios update failure (stuck in an eternal loop))

  Hello

  I wonder if anyone can advise me please?

  I have a HP Compaq 2510p laptop that starts, displays this error message:

  "Your Bios did not complete the update"

  A few seconds later late in goes to the HP Invent screen. and then again the previous error message. These two screens cycle constantly and there is not only one key that I can use to access the bios settings.

  Presseing F9, F10, F12 or F-everything works. No key command does not work. Can I not boot from the internal drive, CD, USB etc.

  How can I regain access to this faulty machine to restore or repair the bios please?

  Here is a link to the images of the two alternating screens that I'm stuck:

  http://postimg.org/Gallery/2oa73dj8q/

  P.S. This thread has been moved from Windows Vista laptop - Envy, Pavilion, Presario. -Hp moderator of the Forum

  Hello:

  It seems that you have a problem similar to this model (which is basically the same model as yours, except with a 14.1 "display).

  /T5/notebook-HP-ProBook-ZBook/issue-with-BIOS-update-on-Compaq-6910p/m-p/2361103#M165620

  Your situation sounds a little more serious as mine was, because I (another one on this thread) could not get into windows, and flash back to F.17.

• LabVIEW picture control - many updates - memory problem

  Hello

  I have little experience with LabVIEW and am currently using a picture control in one of my applications.

  The idea is that some areas (rectangles) inside the image control that is updated all the time with different colors. (according to a parameters measured)

  I have a large loop that takes a shift register that contains the image control.

  I noticed that the operations of different 'draw the Rectangle' I am the scene are piling up so the memory continues to increase...

  I did a small sample program that demonstrates this behavior.

  I want to update the image all the time in simple control. How can I ensure that memory does not get stored? Are there functions with which I can replace a portion of the image control with a new pixel values rather than simply add these new values each time for the image control?

  Thank you in advance for your help!

  Hi k_tunsten,

  Just remove the register shift. The result is the same, but the performance is much better and will not increase the memory.

  OK this isn't really the same thing, but the indicator buffer puts the old image, so that it looks the same.

  It will be useful.

  Mike

• Update memory Pavilion 17 e017dx

  Wanting to spend laptop 8 GB memory 4 GB on a model of 17-e017dx bought Pavilion recently. Who needs to know how to access the memory module compartment. Can someone help with how to disassemble the cover?

  Hello

  First of all, please check the good RAM using the following information before using a screwdriver:

  http://www.crucial.com/EU/upgrade/HP+-+Compaq-memory/Pavilion+17+series/Pavilion+17-e017dx-upgrades.html

  The following guide will show you how to change RAM (including the cover):

  http://h10032.www1.HP.com/CTG/manual/c04069163.PDF

  Kind regards.