Compaq mini cq10 wifi switch does not

Similar Questions

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• Compaq Mini CQ10-400 IDT High Def Audio Code 10

  I have problems of High-Def Audio Codec IDT - 10 Code. Thanks for your help and the info below.

  Basic on HP-Compaq Mini CQ10-400 information
  Manufacturer: Hewlett-Packard
  Model: Compaq Mini CQ10-400
  Processor: Intel Atom N450 @ 1.66 GHz 1.67 GHz CPU
  RAM installed: 1.00 GB
  System type: 32-bit
  Pen and touch: NO
  Windows: Windows 7 Starter
  Copyright: 2009 Microsoft Corp.
  Service Pack 1
  Windows is activated.
  Prod ID: 00342-OEM-8992752-30008
  Shows Device Manager:
  IDT High Definition Audio CODEC with the 'yellow exclamation point.
  General: This device cannot start (Code 10)
  Pilot: Provider: IDT. Inc.
  Date: 2013 - June - 03
  Version: 6.10.6482.0
  Signatory: MS Win HW compatibility Publisher
  Name: Win\sys32\drivers\stwrt.sys

  That's what I got when I installed the file recommended.

  The hardware found is not supported by this package IDT.

  The installation will be interrupted.

  This was done quickly and I as much as I was before.

  Thanks for trying to help me.

• Compaq mini cq10-130se bios password reset

  need bios password for compaq mini cq10 s/n cnu002318r

  Try ham.

  e9l117f3ub

  3rd letter tiny L.

  4th and 5th is number 1.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Set up freshly - WIFI system does not

  Hey there,

  After some virus problems, I set my system, formatting the hard drive and reinstall Windows. I also downloaded the update of the Lenovo system, all installed updates and downloaded the center of Solution ThinkVantage. Now the PC is working again BUT the WiFi adapter does not work. It seems to be non-existent, if I press F9 it says I'm supposed to press the switch of hardware. I have a ThinkPad Edge 15, there no such a change at all.

  In the hardware Manager I find a network driver device, so I guess that's it. However, no driver seems to work. I downloaded the dirver (s) of WiFi on the Lenovo site and install, nothing happens. What can I do?

  Here is my card:

  -Thinkpad Edge 15

  -Windows 7 Home Premium (OEM)

  -the driver I installed that did not work: Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32 bit, 64 bit), XP - ThinkPad

  Thank you in advance for help you! I am fairly certain that the works of material, before I set uo the WiFi system was not at all a problem.

  Best wishes

  Tobias

  
  

• Compaq Mini CQ10: Unlock the password

  Dear support team,

  When I got tired to open my Compaq Mini CQ10 here require a password that is not known by me. I has not yet set a password. When 3 times entered password incorrectly show a text:

  Password check failed

  Fatal error... System stopped.

  CNU0015D3Q

  Please give me password reset...

  Please try e9l113qtf5

  It is case sensitive. The third character is lowercase ' L'.

• compaq mini cq10-110es password

  Hello

  I have a laptop compaq mini cq10-110es

  Serial number is: CNU0021X83

  I forgot my bios password

  Help me please

  Hotma try.

  e9l11734uf or e9l1173ruf

  3rd letter tiny L.

  4th and 5th is number 1.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Compaq Mini CQ10 800ST: upgrading RAM CQ10 800 ST

  Hello. I want to update my PC RAM from 1 GB to 2 GB. But it says that you can only use 1 GB for this PC. Is this good?

  http://support.HP.com/tr-TR/product/Compaq-mini-CQ10-PC-series/5082175/model/5116210/document/c02863...

  The PC can take 2 GB of RAM. Here is the Manual:

  Manual

  However, the delivered operating system is Windows 7 Starter 32 bit that is not able to use a concert. You can install 2 GB and the hardware will support it, but you need to install a different version of Windows. If you already have 8.1 32-bit Windows, you can install 2 GB of RAM and it will work.

  See page 2 of the manual.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Mini CQ10 - 150CA need a password CNU0095JS7 bios error code

  Hi my Compaq Mini CQ10 - 150CA computer just started asking me to enter the current password. It shows then I get three attempts

  "Password check failed

  Fatal error... System stopped.

  CNU0095JS7 ".

  What does that mean? What caused it just start happening all of a sudden? Can you help me?

  Ian

  Hello

  Enter: e9l11oqwnx (3rd character is a lowercase L)

  Kind regards

  DP - K

• Compaq Mini CQ10-120EZ: Compaq Mini CQ10 - 120EZ Bios Reset Code please!

  Please I need help to reset my bios password Compaq Mini CQ10 - 120EZ CNU01620T4.

  Try Eli.

  e9l13g71av

  3rd letter tiny L.

  4th and 8th is number 1.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Date and avoid changes to my computer Compaq Mini CQ10

  HelloW Microsoft Community, I've got this Compaq Mini CQ10, whose battery is dead. Its CMOS battery also died and I took a step to replace since when I turn my pc off and disconnect the power adapter and plug it back, turn on I display the Date and time have changed. What should I do once more...?

  If the time and date is correctly set when the PC is turned on, but the sound is set incorrectly when the PC is powered extinguished/turned on, it is usually a sign that the CMOS battery has failed or has not been installed correctly.

  Verify that the CMOS battery is indeed a good and so its equipped properly.

• Wifi button does not work after upgrade to windows 7 to windows 8

  Hi all

  I use a computer hp laptop pavilion. My wifi button stopped working after the upgrade to Windows 8. I installed the latest drivers wifi but the wifi button does not work on wifi. Help, please

  Concerning

  Wandi

  Hello

  I use a hp pavilion dv6 7030ei.

  I solved the problem of my wireless button not switching not wifi enabled or disabled. My laptops wifi button now works perfectly.

  I have has been Manager of access devices, then selected, network adapters

  -Click with the right button on intel Centrino Wireless - N 2230,

  -then click on uninstall and then uninstall. Restarted my PC.

  Then bang! my wireless button started working! I don't update this driver up to what Microsoft or intel acknowledges this problem caused by the wifi drivers 8 windows and provides an updated driver that is causing the problem I encountered.

  Thank you all for your comments.

  Concerning

  One_D

• on/off switch does not work since the SIERRA

  Hello

  Since I'm sierra os that the on/off switch does not show me the dialogue window in which you can choose between power, reset, disconnect you.

  This is a problem of Sierra? There is an option in the system Pref?

  Thank you

  It works very well in the Sierra.  Simply press the button longer.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• My wifi network does not connect automatically

  Hi all

  im a user frustrated.

  My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

  I also deleted the list of networks do not forget and do it again. Any help?

  Much appreciated guys.

  

  create another user account and start to this account, set up a wi - fi connection and restart to this account.

  Is the same behavior?