Compaq Presario C700: Wifi 'local only' Compaq Presario C700

Similar Questions

• WIFI missing, local only

  I'm frustrated, I spent hours and hours searching for a solution, reading without result.

  RELOADED windows vista on two different computers, since no possibility to connect to the wi - fi... local only service.  No longer want to read and try things that don't help. Please give me an answer and a solution. Obviously, this has been a problem for some time with windows vista, there should be some sort of fix now.

  It does not help if you post here what you have already tried.

  Make sure that the wireless switch, if any, is activated for two laptops.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Atheros / Vista "local only".

  Go crazy with this problem of "local only". Hundreds of discussions on this problem. Very few solutions.  My mother's laptop connects via an ethernet cable, but not through the wireless card. (Atheros).  I spent almost 6 hours dealing with this ridiculous problem.  Seriously, WiFi is a facet of base... and if the phones can do things, he should not be so difficult for a computer to do.

  Wireless connection "local only".

  Compaq Presario C700
  PN [mod edited on 12-08-14]
  Atheros AR5007 802.1 b/g 1
  NETGEAR Wireless - N 150 router model WNR1000v2

  (1) updated driver from 30/05/2007 version to:
  7.7.0.396, release date: 30/09/2009

  (2) the router factory settings restored.

  3) attempted with WPA, WEP and no security.

  (4) netsh int ip reset & Reset logs

  (5) regedit by Microsoft on DHCPbitFlagToggle, after trying the
  related Microsoft hotfix.

  (6) off firewall

  7) attempted to have windows to diagnose and resolve.

  (8) update to the Vista SP2

  (9) a second test machine, he was able to connect to the router fine.  Tried to connect to another router with Compaq, has failed. Problem certainly seems to be with the Atheros driver/network stack.

  (10) all check-out IP addresses and are configured correctly.

  It's just what I remember off the top of my head.

  Hello:

  I think that this driver is still the old to solve your problem.  Use this one and I am very confident that your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Paul

• wireless network connection fails to connect to internet-local only connection

  too much time invested to leave now... Here is the configuration:

  HP dv2500 presario with home premium Vista 64, SP2... can connect to the internet via ethernet, wireless local = only... Network router is Netgear WNR3500L with 5 machines to sp3 of xp connected without problem.

  Been to the grinder on this one-darn google redirect everything began, had to shut down the network, reset the router, safe & bring systems up to one at a time running 3 to 6 programs of malware to clean each box...

  So I've updated driver, roll back driver, many forums, tried too many things with the same result... Performed system updates to restore, all - same result... Last step was MS support article that I followed step by step without resolution, so I hit the button... got support with regard to the identification number of the product, system would detect not, therefore entered manually & get a message no valid... I can go for $ 49, but just too stubborn to throw good money after bad at this point... Yes - I have removed the connection, hardware, resettled, updated, restart, stood on his head and blew bubbles outta my ass and still just get a local connection... This message is sent to a mobile solid XP pro sp3 5 yr old rock... SEND HELP PLEASE!

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  You must set up a wireless internet connection in the network as well as the connection sharing normal LAN wireless and connect to it as well as the local connection.  If you don't do this, you will not have an internet connection.  You need both.  You must also enable some features in the main area sharing network to access the internet - they are quite well defined.  If I were you, I remove all wireless Vista machine and set up from scratch.  I would like to even re - install the wireless network card drivers /, firmware or software just to be safe.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with Internet access: local only for wireless in Vista

  Help, please.  I have a Dell laptop and a Dell desktop computer.  The other day, I pressed WPS on my router Netgear wireless, and since then, my desktop computer (Windows Vista Home Premium SP2) was not able to connect to the Internet.  The office is connected to my router.  My Dell (Win 7 Pro) laptop is able to connect wirelessly to the router and Internet.

  That's what I tried:
  (1) I bought a new wireless router Netgear WNDR4500
  (2) I bought a cutting mini USB wifi adapter for the desktop.  Install the driver.
  (3) reset winsock, ipv4, ipv6, dns
  -netsh int ip reset reset.log
  -netsh winsock reset catalog

  ipconfig/flushdns

  (4) order McAfee firewall
  (5) restarted several times
  (6) persons with disabilities wired and wireless enabled - I get signal green/fort
  (7) off active and wired wireless
  None of the above seem to work.  I keep getting 'Access to local only' on both cables and wireless.  When I ping yahoo.com, I get no response.
  My laptop, however, works very well in the connection to the wireless router and also to the Internet.
  Anything else I can try?  Help, please!
  KT

  Hello

  Thanks for sharing the information valid.

  In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

  I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

  Deactivation and reactivation of these two connections: FAIL.

  "Diagnose and repair" on the two connections: FAIL.

  Under dynamic I.P. type to static/static to the dynamic: FAIL.

  Uninstalled all network via Device Manager devices, then restart: FAIL.

  Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

  The command ipconfig/all text follows:

  ----------------------------------------------
  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Brooklyn's>ipconfig/all

  Windows IP configuration

  Name of the host...: Brooklyns-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-31-87-95
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-4E-2E-F7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
  B4B}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
  0FA}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Brooklyn's >
  --------------------------------------------------

  Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

  I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

• Could not be connected to the internet. My connection says "local only".

  Please help says local wifi only

  Hi I got a gateway instead of home now I can't connect it says local only I tried to remove and set it up again, but it still connects how can I change to please the House

  Hello

  I suggest you follow the steps in the link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  You can also follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I only 'local only' connection, does anyone know a real solution that works?

  Hello

  My computer is a Dell XPS M1330 on Vista.
  Recently, I have noticed my wifi says identification or connected only local connection.
  Because this came I was not able to connect to any wireless network.
  I tried to connect directly via cable ethernet... still the same
  Even my 3 G Dongle says the same thing.
  The router works well because I use another computer on it, cables etc. all well tested okay with other computers.
  The computer worked fine on the router until the router is a D-Link router.
  I am pleased that the router is not the problem as all of the other computers and devices connect very well but I tried factory resetting is still no joy.
  I tried drvers off installation and reinstallation on the computer, but that networking does not work on wired, wireless or 3 g dongle I suspect something went wrong somewhere with the computer.
  Can someone please suggest a solution.
  Concerning
  Colin

  Hello

  Method 1:

  I suggest you to follow the links and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  See also:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

• Computer connects to the network wireless as "local only".

  I am running Vista Home Premium SP2 on a HP Pavilion laptop.  I've never had any problems to connect this machine to a wireless network before, in hotels, at home, or anywhere.  My current home network is a modem - cable-> wireless-> wireless netgear n300 router.  My laptop connects to the internet via the modem cable directly or a wire from the netgear router.  I have a second, almost cell identical (it's intel, while the one who does not is AMD) which connects to the network wireless without any problem.  Two iphones connected wirelessely without any problem.  My HP laptop is the only one who refuses to connect to the internet.  Connected to the wireless network, it has access "local only".

  I tried the solution in this article: http://support.microsoft.com/kb/928233

  The question does not seem to receive an ip address, the computer receives an ip address.  I have disabled the IP v6, ran the norton removal tool, because I only had to a point and tried all other suggestions in these discussions: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be and http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/bc08f0e7-49a9-4458-9e0e-149b2df362ec.  I've uninstalled and reinstalled the adapter and all TCP/IP and network protocols associated with it.  I am at a loss and would welcome any ideas.

  Here is the result of the command ipconfig / all:

  Windows IP configuration

  Name of the host...: Arrakis

  Primary Dns suffix...:

  Node... type: broadcast

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-1E-4C-B2-32-BC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.5 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Wednesday, 28 April 2010 21:40:55

  End of the lease...: Thursday, April 29, 2010 21:40:55

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: NVIDIA nForce Networking Controller

  Physical address.... : 00-1B-24-FA-DA-80

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {31C080CE-FE0B-4D50-B734-C782C9A25FBC}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {B198B0D3-B70A-4E3E-858D-9774C414EECD}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  If anyone has this problem, it has been resolved by rolling the security settings on the router WEP.  I got the answer from the support client netgear.

  Amazing how two iphones, another laptop with XP and a laptop running Ubuntu Linux all about them without any problem, but wouldn't connect Vista laptop.

• HP G60: update for Atheros AR5007 802. 11 b / g Driver HP G60 local only

  Hi all!

  Hoping that someone who has a lot more of an idea about this can help me because I can't really find what I need to fix this!

  Basically - I have a computer old enough HP G60 laptop running Windows Vista and using some providers of internet (SKY and Virgin Media) I can connect to the internet, but it only shows Local only. (I don't have this problem when it is connected to BT Openworld is told by the way, not sure of the relevance of this?) I can connect to my wifi with my iPhone without problems, so currently connect to the internet using the USB cable, but it's so slow!

  Is it possible to update the Atheros driver for this problem?

  Very grateful to anyone who could help me!

  Thanks in advance

  Hello:

  You probably need to install the updated wireless driver that provides support for WPA2 security.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_108905_1&swEnvOid=4059#

  Check to make sure that the new driver has replaced a former and indicates a date of version 2011.

  If she does not, uninstall the device by right clicking on the Atheros wireless card, select uninstall, reboot and install the new driver.

• 3g point hot Local only?

  I've set up the hot spot of 3g, using the droid x and 2.21. It has worked well but says local only. I have the package data unlimited, so why local only?

  Anyone knows what must be done to solve this problem.

  It adds $ 20 on the plan to use the application of the hot spot, which you? The regular data plan only covers the data directly on the phone itself, not the data that is used on another device

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Local only access immediately after the updates from Microsoft installed.

  I have a Dell 531 s running Windows Vista Home Basic Edition.  It has been working fine for years with a USB wireless adapter.  The other night I left it on and Microsoft installed some updates and restarted my computer for me.  Since then, I can't get my router LOCAL ONLY access.  I can't access the router or do something that is no longer communicates properly with him.  I looked and I tried to uninstall IASATP 3 equipment, put it back and restart.  Still only ACCESS LOCALLY on this computer, so that all other devices Wi-wired and the same mental health of router to function normally.  Any suggestions?

  Hello

  -Who were the updates installed on your computer before this problem?
   
  Method 1: I suggest you to see link below and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  For reference:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
  Method 2:
  Follow the steps mentioned below and check if the problem persists.
  (a) enter in the network and sharing Center.
  (b) right click on the Network icon and select view status of.
  (c) click on Properties.
  (d) click on Configure , then select the driver tab.
  (e) click update the driver.
  
  For reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information helps.

• Fix problem 'local only' when the connection is through a wireless connection

  access point appear: unidentified network
  Internet appear bloqued

  access: Local only
  connection: Wi - Fi connection.

  Please help verify what is the reason for which "local only".
  IP is assigned automatically by DHCP, but is not possible to connect to the internet, the problem appears only on windows vista PC, in my other computer with XP, version the connection is good.

  I have Microsoft Windows Vista Home Premium SP1.

  Thank you

  Check how your security is configured on your access point.  I had to mess with mine a bit.  For some reason, my machines windows 7 were sensitive, in particular on the netgear access point

  http://www.mountainvistatech.com/2012/04/27/Windows-7-wireless-connected-but-local-access-only/

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.