Compaq Presario CQ1-1225 all-in-One desktop PC

Similar Questions

• Compaq Presario CQ1 1000: network drivers for Compaq Presario CQ1-1020 all-in-One desktop PC running Windows Server 2008

  Hello. I am trying to create an area of origin. I know I have to use more computers in the domain, but this is not the point. I was wondering if someone could help me find a driver for Server 2008 network for my computer (or someone could build one but I heard that takes a lot of effort). The original network driver has become unknown when I installed the operating system. I am also aware that I should use a newer computer for this but I can't afford to buy one now and I can't seem too creating a on a virtual machine. Also, I searched all over the internet and there are drivers for my computer, but not for the operating system I. Any help would be greatly appreciated. Thank you!
  
  P.S - computer is in the subject if you have not already guessed.

  Hello:

  It is possible that the file have not checked out pilots in their folder.

  To do this and then try to manually install the driver.

  Download and install this free utility for files.

  1 file listed is for 32 bit.

  http://www.7-zip.org/

  After you download and install 7 - zip, download and register but do not sp46403 run.

  Right-click on sp46403 and select 7 - Zip from the list of items.

  Have 7-Zip extract of: and leave it to decompress the file in the sp46403 folder.

  Then try to manually install the drivers, but navigate to location 7-zip extracts the sp46403 driver file to.

• HP Compaq Pro 6300 all-in - One desktop PC Touch Panel does not

  I have a new HP Compaq 6300 Pro all-in-one desktop PC. It came with Windows 7 32 bit preinstalled, but I wanted to Win 7 64 bit so I had to do a clean install and therefore lost all my drivers.

  I was able to get most of the drivers I need HP driver download page for my specific model, but the touch screen under the screen no longer works. It certainly worked until I changed the operating system. To clarify, this is a sign of close contact under the screen that allows you to mute sound, change the volume or change the brightness. The control panel items are invisible until you touch it, how the options - this feature still works. They light up, but do nothing for the levels of noise or the brightness.

  I don't know much about the drivers, but this seems to be a driver for me problem. Does anyone have any ideas on how I could get the touch screen works again, because it is an interesting possibility, I'd like to be able to use.

  Thanks in advance.

  Hey, no one has responded to my request, but just Serendipity led me to the solution, so I'll post it here in case someone else has the same problem.

  In his search for information about installing additional RAM memory, I found myself in the correct name of the touch screen, I had a problem with: capacitive controls, aka buttons capsense. Once I got the correct term was a few seconds before I got the solution, see:

  HP all-in-one control panel Button for Windows Support

  According to the HP support page, the little softPaq provided "patches a question wherein Capsense buttons (mute, Mic, theft and theft down) of your computer do not work after manually installing a version of Windows", reinsert the necessary registry key.

  The softPaq (sp60481.exe) worked well for Windows 7 64 bit on my HP Compaq Pro 6300 all-in-one and I am very happy to have this cool touchscreen works again.

• HP ENVY bow 27-k119 TouchSmart all-in-One desktop PC

  Hello. I have

  HP ENVY tilted 27-k119 TouchSmart all-in-One desktop PC, after the upgrade to windows 10 I have no audio, I tried to download beat audio SUPPORT HP, without success. Can someone help me. Thank you

  Hello

  No support Windows 10 from his homepage. Please try the following driver for Windows 8.1:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64642.exe

  Kind regards.

• Office all-in-one HP 20-e019: HP 20-e019 all-in - One Desktop RAM upgrade?

  I bought the HP 20-e019 of all-in-one desktop computers, but they are running slow with 4 GB of RAM that came with it. I bought RAM by card, but cannot find the expansion slot... is this really scalable PC? Or am I totally missing the slot? Thank you.

  Hello

  4 GB is the maximum number on your machine, and it has only ONE slot. You cannot add more:

  Memory upgrade information

  • Memory channel architecture

• With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

  I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

  Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

  

  3 HDMI input

  To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows 8 or 8.1 update? HP ENVY TouchSmart all-in - One desktop PC 23-d260qd

  I just bought the HP ENVY TouchSmart all-in-One desktop PC 23-d260qd and it happens today. I wonder if it is better to upgrade to Windows 8.1 instead of windows 8. It seems that several people had problems with the upgrade. I just got my computer today and have yet to open the box, but I wanted to know what OS is better and how I would go about updating Windows 8.1 must be optimal. My computer specs are below:

  • 64-bit Windows 8
  • • 3rd generation Intel® Core™ i7 - 3770S processor [3.1 GHz, 8 MB of shared cache]
  • • 1 GB NVIDIA GeForce GT610M [DX 11, 3. 0a MXM]
  • • 12GB DDR3 1600 MHz SODIMM [DIMM 2]
  • • 2 TB 7200 RPM SATA Hard Drive
  • • Microsoft Office Trial

  Thanks in advance for your suggestions and help!

  Create a recovery disk set before even considering the upgrade.

  If you are not yet accustomed to Windows 8, then give yourself a little time to get familiar with before committing to an upgrade to Windows 8.1.

  I prefer the upgrade of Windows 8.1, in particular the return of the Start button, it is not the same as the Start button was before Windows 8.

  Important factors for Windows 8.1 are available on the web support download portal for your PC.

• Upgrade memory for HP Pavilion 23 - g040xt CTO all-in-One desktop

  When I ordered my

  HP Pavilion 23-g040xt CTO of all-in-One desktop PC I could only afford the version of 4 GB of Ram. Now, I want to upgrade the memory up to 16 GB. I have a few questions

  1. I noticed all this in a use SODIMM and I was wondering if I could buy any DDR3 SODIMM for this or if I have to buy a specific manufacturer?

  2. now, I have only 4 GB using 1 of the 2 memory slots. I'll be able to buy 2X8GB and use this location empty on my motherboard and run dual channel?

  3. How do the memory locations? Just pop the back of all in one PC?

  Thank you

  According to the specification, this model supports up to 16 GB (2 x 8 GB), as follows:

  Dual channel memory architecture
  Two DDR3 SODIMM Sockets (204 PIN)
  Supports the PC3-12800 (DDR3-1600)
  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SODIMM

  Any brand or model of RAM memory that meets the following specifications should work on your computer. If you have 4 GB in a housing, you will need to remove it to install both 8 GB DIMMs. Yes, you just need to pop on the back.

  There should be two or more screws on the back that need to be turned counterclockwise until you hear each "click" of 5-6 times. Then, take a lower corner and lift the corner. Repeat with the other bottom corner. Now, lift the... starting back down. You may also need to remove a cap on the memory locations to access.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP ENVY TouchSmart All 23-d044: 23-d044 WANT to HP TouchSmart all-in - One Desktop PC wireless

  This PC wireless adapter does not work with the band of 5 Ghz 802.11?

  Hello @luticrist,

  I understand that you are curious to know if your HP ENVY TouchSmart all-in-One desktop PC 23-d044 can handle the 5 Ghz bands. According to the HP ENVY 23 - d044 TouchSmart all-in-One Desktop PC product specifications page your computer supports the following communication standards: 802.11b/g/n. With an antenna that works only on a single-band 2.4 GHz. If 'NO' your wireless adapter does not work on the 5 Ghz range.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• How can I get a report by fax on Fax output hp jet pro L7580 all-in-one desktop?

  How can I get a report by fax on Fax output hp jet pro L7580 all-in-one desktop?

  You click on the "Setup" button on the front panel of the printer, highlight "Print report", you should have an option to print a newspaper 'Fax' in this menu.

• ENVY Beats All - In - One Desktop: how to connect a second monitor/TV to HP ENVY Beats all-in-One

  Hi, I was wondering if anyone could tell me if it is even possible to plug a second monitor HP ENVY Beats all-in-one desktop PC, because I'm trying to connect my TV as a second monitor via HDMI, and I tried everything I could, but came empty-handed?

  Hello

  What is the product/model of your AIO machine? I have a lot of cases, you cannot use HDMI port to connect to a TV, because it's the HDMI IN port. You need USB - HDMI converter/adapter to connect to a TV (or monitor).

  Kind regards.

• External monitor to an hp pavilion 23-b010 all-in-one desktop?

  I just bought a hp pavilion 23-b010 all-in-one desktop computer... can I connect it to an external monitor? and if so, are there special requirements for the external monitor?

  Here are the specifications of your all-in-one HP Pavilion 23-b010 computer office. According to the specifications, this computer has no video output of any kind ports (DisplayPort, VGA, DVI, or HDMI). You will need to purchase and use a USB-to-video as the EVGA UV adapter more + UV39 or UV19 to connect an external monitor to your computer.

• Fan failed on Presario SG2 210UK all-in-One

  The fan failed on my Compaq all-in-one for the PC will start is no longer.  I took out the fan and went to all the stores, I can think of two independent and PC World, Maplin, etc..  However, I didn't chance anywhere.  Does anyone out there have any ideas on where I can get one?

  The fan is a Foxxconn NFB55A0SH.  I managed to find the good fan online but the connector is not the same so would not fit.  My has a three female connector.

  I'm in the United Kingdom.

  Thank you

  Torchomatic, welcome to the forum.

  Here is a link on Amazon.com with several pages of fans for HP computer.  I didn't know which fan you need, so I just provided this information.

  Also, here is a link to HP PartSurfer.  Read the instructions to see if you can find fan.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• 2nd video device HP Pavilion-23-a304a-All-in-One Desktop PC E9V70AA

  Hello world

  I'm new to the forum. I just bought a HP Pavilion all-in-one 23-a304a Office P E9V70AA.

  One thing that I forgot to check was I can plug in a laptop and use the HP as the DISPLAY monitor, sometimes I work from home and using the larger screen would be great, but I've noticed that there are no HDMI or other video ports on the desktop.

  The thoughts and thanks in advance.

  Rob

  Hello

  It has not designed this way, you can not use it as a stand-alone monitor for your laptop.

  Kind regards.

• Internal speakers on my HP ENVY TouchSmart all-in-One desktop PC 23-d027c no longer works

  Hello

  I just bought my HP ENVY 23-d027c TouchSmart all-in-One PC of office a few days ago.  It was working fine until I tested the speakers.  When you watch youtube videos, the internal speakers will stop working, while the mute button is not enabled.  It takes a few minutes, and then the speakers work again, only to cut out once more.  IT IS SO FRUSTRATING!  What's weirder, I put a dvd to see if it was the speakers, but the audio on the dvd seems to work very well.  Also, when I use headphones, the speakers work fine.  I don't know what the deal is, but according to my research, this seems to be a fairly common phenomenon on HP computers.  I'm struggling on the Exchange on this computer.  IF this isn't a simple solution, this machine will return to the store!

  Help, please!

  Thank you in advance!

  Wayne

  Hello MakCo,

  Your speakers are not working correctly.

  Go to Device Manager, uninstall the IDT audio and restart the computer.

  Uninstall it and reinstall the audio driver.

  Here is a link to the Device Manager.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes

  Nice day.