Compaq Presario CQ56 Caps Lock flashes

Similar Questions

• Presario CQ56: Caps Lock flashes constantly

  When I press the power button, I hear that the components start to work, but the screen is completely blank and I can't do anything but turn off the laptop. What I see is the white LED on the constantly flashing caps lock. In addition, there is orange led on the button that has a WI FI signal. It is orange and constantly now.
  So far, I have tried a hard reset, did not have any change.
  Thanks for any help.

  Test

• Compaq Presario CQ62-412NR does not start. Caps lock flashes.

  The LED caps lock flashes repidadly with long breaks between each blink, the wireless light and constant and the adapter LED is steady. I read blink codes and determined, he was the processor, but the problem persists after him substituting a known good. I finished the resets power to clear the bios before and after the change of the CPU. I also tried to replace the RAM. Anyone here have a clue whats going on?

  This looks like a problem with the motherboard if you already replaced the CPU and RAM.
  
  It would be probably cheaper to replace the unit at this time only so, fix it or replace the motherboard.

• Compaq Presario CQ56: BIOS password lock

  I bought a HP Compaq Presario CQ56 model on eBay for $25 with screen cracked and no hard drive. I wasn't informed that it is has a password for BIOS-_ - after you have entered the incorrect password three times I get the key: 34915346 error and it keeps let me try again after the reboot. Can someone please help me with this?

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  stems-and-software/system http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Compaq presario cq56-115dx: bios password began to appear on a presario cq56-115dx laptop

  I have Compaq presario cq56-115dx and got the 53346355 Lock password can u help me

  @wickedkidd

  Enter 42024991

  Kind regards

  DP - K

• I have a compaq presario cq56-115dx notebook pc and I wiped the hardrive without knowing

  Hello

  I have a Compaq Presario CQ56-115DX laptop running on Windows 7. I wiped the hardrive without knowing what would happen, and now when I turn it on it has a black screen with a white dash flashes. I was wondering if there was a way to solve this problem.

  Thank you!

  Hello:

  You will need to order a set of recovery disks.

  http://support.HP.com/us-en/document/bph07143

  Or if you can read your Microsoft W7 product key you can make your own windows 7 installation disc.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Compaq presario cq56 primer not.

  Model: Compaq Presario CQ56-219WM

  I've had the computer for only less than a year. When I press the power button, the computer starts, appears red 'Q', then 'hangs' on a black screen with an underscore flashing. I ran the diagnostic tests available and everything SEEMS fine, but it still does not boot past the black screen. Tried a hard reset, still no luck.

  Hello

  Assuming you are using Windows 7, try the following.

  If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as having a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Demarrer start from the rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Compaq Presario CQ56-115DX power on password

  I need help wih the power on password for my Compaq Presario CQ56-115DX

  ~ Thanks in advance

  Hello

  Enter: 66760919

  Kind regards

  DP - K

• Compaq Presario CQ56: Forgotten password

  My Compaq Presario CQ56 throws me an administration password and when I try to enter it, it gives me a code system with disabilities... 82527050... I know not what to do, please help, everybody. ...

  #HPExpertDay

  Try:

  33485096

• sleekbook envy 6: laptop won't start, caps lock flashing 3 times

  I want to 6 sleekbook and all of a sudden that it does not start and the caps lock flashes three times I already saw the code flashing and tried to rest the memory but it still doesn't work, I ran in problems with the laptop before the blue screen, but it was fixed its own I think

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that your laptop has a blank screen and a blinking/flashing CAPSLOCK all the time

  If the Capslock LED flashes 3 times this means "Non-functional memory error", in order to solve the problem, replace the card memory

  Note: If you are comfortable open Notepad, you can check how much you have memory module. If you have 2 sticks of memory, you can test one at a time on the two slots individually to check if the fault is with the module module slot or memory memory your laptop [repeat the same steps to test another memory module]

  If you find the above steps difficult and that it is a hardware problem and I recommend you contact HP Support by phone for further assistance immediately to get your diagnostic Notebook and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• Compaq Presario CQ56 - :(wireless Internet problem

  Hey everybody,

  So I just joined here to see if anyone can help with my problem, because frankly, I'm out of options now about two weeks asking friends and colleagues and searching the Internet for answers to similar problems. I tried twice with the information I found on this site for quite some time and it does not work for me!

  In any case, I have a HP Compaq Presario CQ56 laptop. It has been implemented correctly when I bought it, everything worked perfectly. I managed to catch a virus that prevented me from even turn on my computer (which is strange, because I'm not a fool with computers, and I know what not to do/download sites to visit), so I had to restart my computer to stock, I used my Windows 7 disc, partitions formatted and installed windows again.

  Now, for some reason it doesn't connects wireless Internet. It connects when I have an ethernet cable connected, but it is not all networks, as shown in this screenshot:

  

  (And also here's a cute Bunny for your pleasure)

  So you see my problem it is very frustrating. I don't know what is the cause, but I guess it must be a driver problem? Which is why I write here, if this is indeed in the wrong section, please accept my apologies.

  Here is an another screenshots that can help, just in case:

  

  If someone could shed some light on the problem for me, or even to resolve, I'd be very grateful it is extremely annoying. As I said, it works fine when I have my laptop connected to the internet, when I'm in College, but when I come on a weekend, I can't put my laptop, because I only WiFi at home.

  Thanks for reading

  Hayley R

  You are the very welcome, Hayley.

  The problem is that the needs of the wireless (network controller) one adapter driver installed and here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  Once you install the driver above, the wireless should work just fine.

  Best regards

  Paul

• Caps lock flashing light

  I have a laptop hp pavilion 2237nr PC g6, and recently the caps light lock began to blink continuously. It stops for awhile but then it starts up again. my laptop seems to work fine but I am very concerned about the blinking light. Please help I am panicking!

  The problem with your computer is just a little different from the next thread that yours always seems to be start the system and work while the caps lock flashes.  Just not sure what that means, but I think that if go you to sift through this post,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/laptop-won-t-boot-caps-lock-button-light-blinking/TD-p/1300161/page/2

  you might get a few suggestions.  In the post is a link to a document "traffic lights" which may also be useful.

  Good luck

• Compaq Presario CQ56-110US: Will Compaq CQ56 8 GB RAM support?

  According to the Compaq Presario Maintenance and Service of Guide matrix on page 2 (http://h10032.www1.hp.com/ctg/Manual/c02657369), my Compaq Presario CQ56-110US laptop supports up to 8 GB of system memory, but by following a few lines to the bottom of the guide, it lists the configuration information that tops out at a total of 4 GB. If I remove the 2 existing memory chips (1 GB each) and install two 4GB chips, my laptop will support the upgrade to 8 GB?

  Compaq Presario CQ56-110US laptop

  Processor Intel® Celeron® 900 (2.2 GHz)

  Supports dual channel DDR2 800 MHz memory

  Thank you

  Strobe1

  Hello:

  Unfortunately, your model will not support 2 x 4 GB of memory.

  This is because it is equipped with an Intel Celeron processor, your laptop is the chipset Mobile Intel GL-40.

  This chipset only supports a maximum of 2 x 2 GB memory.

  http://Ark.Intel.com/products/35501/Intel-82GL40-graphics-and-memory-controller-hub

  By the way... 2 x 4 GB memory DDR2 would cost a lot of money.  It was the cheapest I could find.

  http://www.Newegg.com/product/product.aspx?item=N82E16820145599

• Compaq Presario CQ56: System disabled

  My Compaq Presario CQ56 shows system 98207381 disabled when I try to start it. I searched the forums and find other codes, but not this one.

  Can anyone help?

  Thank you

  TERI

  @Heavenlee05

  Enter 27165907

  Kind regards

  DP - K

• HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

  Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

  Thank you for visiting @omidmiri.

  Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

  Please try to manually perform a BIOS recovery, as follows:

  1. Turn off the computer.

  2. Plug the laptop using the power adapter.

  3. When the computer is always off:

     1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

     2. Release the power button and the keys.

  By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

  Source: Documentation computer won't start not and Emits a LED or beep Code .

  If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

  Have a great day!