Compaq Presario CQ62 out mode 'sleep', even after hard reset

I have a laptop Compaq Presario CQ61-411WM. He won't have fashion 'sleep'. I removed the battery and the power supply. When it connect every thing upwards. And run it, the light flashes on the laptop. No matter how many times press. It won't wake up.  I can't boot my laptop. Can someone give me a solution to this problem?

Hi melvingene, welcome on the basic behavior of HP you describe is more than a failure to market, as opposed to stuck in mode 'sleep'. With the flashing lights, it might alert you to a specific hardware problem. Try the troubleshooting described in this paper: computer does not start and the lights blink or the computer will beep

If you do not started, you probably encounter some kind of hardware failure.

Let me know how it turns out.

Tags: Notebooks

Similar Questions

  • HP Officejet Pro 8600 more won't copy even after hard reset

    HP Officejet Pro 8600 Plus the Windows 8 operating system

    Will be printed computer; you scan documents & save on computer. will NOT be printed on the device.

    Stop printer; unplugged from the wall and the back of the unit. holding the power button for 60 seconds. reconnected; unit began.

    Document placed on the glass; Press copy; hit black; Unit pulls the sheet of paper; device scans the document (squeaks when scanning); After the period of time, it spits out paper & readings 'canceled copy', but do not erase or return to the home screen.

    Help!

    Hello

    Please check your Inbox for private message for the reset, I will send you.

  • Replacement Palm TX has problems white screen even after hard reset

    I hope someone can help me find a solution.

    I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

    It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

    I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

    I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

    Does anyone have a suggestion?

    Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

    Message edited by Damien on 06/30/2009 08:24
  • my apple TV remains out of sync even after sleep

    my apple TV remains out of sync even after sleep

    Could you give a little more detail, please? What is out of sync with what?

    And just for reference, which is the version tvOS on your ATV?

  • Power on laptop Compaq Presario CQ62 of password

    I have a Compaq presario CQ62 laptop requireing a power on password after 3 attempts gives key number: 64560868 someone help out me? Birdy

    Hello

    Try to enter: 71448268

    Kind regards

    DP - K

  • disk failure hard compaq presario cq62-231nr

    My compaq presario cq62-231nr (product # XC434UA #aba) stopped working last week and I took it into the store of the computer it is diagnosed. They said that the hard drive has failed and they were unable to get all the files out of it. They wanted about $200 to fix so I just brought home. I bought a hard drive to it (500 GB hitachi) and when I install it myself. I have 4 dvd recovery disks that I made for her when I bought it there are 1 1/2 years. Never done this before so I am a little worried about smooth how it will go. My questions are:

    1-will the recovery discs works

    2 - 500 GB hard drive will I put actually no difference from the old hard drive was a 320 GB

    3 - What steps should I take after I put my hard drive in and start it (insofar as the use of the recovery discs)?

    4 - I need a key at any time in this process? I don't have one that I know of.

    Any help is appreciated!

    Hey, Dan:

    You are the very welcome.

    You have almost...

    When you turn on your PC for the first time after installing the new hard drive, you must press the F9 key to the HP welcome screen.

    This will give you a few startup options.  Your DVD player should appear as one of these options.

    Don't do anything about the selection who again. First, open the DVD drawer and insert the diskette 1 of your set of recovery disks. Close the door and wait a moment – just a few seconds.

    Then select the DVD - ROM drive in the list of the bootable devices in the list of startup options.

    Follow the instructions on the screen.

    You never know how long will last the electrical components.  This is why it is always advisable to keep the backup files.

    There's an old saying... "It is not a question of if a hard drive will fail, but a matter of time."

    Paul

  • How can I install Windows XP on windows 7 laptop Compaq Presario CQ62-215DX?

    I want to install XP on my laptop (laptop Compaq Presario CQ62-215DX) which has Windows 7... give me some advice please

    You replace the startup disk in the BIOS cd. Then boot from the XP CD. And press a button when it tells you. However, he will wipe away Windows 7. So, if you want anything copy everything you want (with the exception of programs), before formatting the hard disk.

    NOTE: XP has no drivers for most of whats on the system (LAN/Sound/player card etc.). So if that is the only computer you have, go to HP site for this laptop search, download drivers and copy them into something. Before you begin. Or you won't get back on the internet...

    Also NOTE: If the disk hard in it is SATA, you will need to disable the AHCI in the BIOS (change it to IDE mode). Or XP will crash before you get to the configuration screen. Unless you download the SATA drivers, unzip / extract and add them when it says press F6 (on a floppy disk).

    The XP CD does not have SATA drivers on it either. If you do not add the SATA drivers during installation, do not change this back to AHCI after installing XP. Or it will crash

    In addition, make sure that you have a XP key. A key to windows 7 will not work

  • Compaq Presario CQ62-209WM turns is not on

    I have a Compaq Presario CQ62-209WM.

    I recently had a problem with this computer where the screen would go completely black during start-up or process during recovery from sleep mode.

    I updated the Bios and the problem disappeared, but now there's another problem.

    Because the Bios has been updated, the computer turns on if the power cable is plugged. But if I turn it on and then unplug the cable, it works very well. It does not lose power and the battery holds its charge normally.

    No idea what could be causing this?

    Try this it should help

    http://support.HP.com/us-en/document/c01684768

  • Compaq presario cq62-219wm cpu update

    We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

    davidljtn44

    You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

  • can't pc vista, sleep-even after restoration and even factory re - configure.

    can't pc vista, sleep-even after restoration and even factory re - configure.

    Hi Barry,.

    Welcome to the Microsoft community!

    The computer will not sleep.

    To help you better, we need more information.

    What is brand and model computer?

    To work with the issue, I suggest you check out the site:

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

    http://support.Microsoft.com/kb/950686

    Note: once you are done with the boot, follow step 3 in the article http://support.microsoft.com/kb/929135 to set your computer to normal startup.

    Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

    Feel free to contact us for any question related to Windows .

  • Compaq Presario CQ62-23 reset admin password.

    After 3 attempts to reset an unknown/forgotten administrator. password on my sons Compaq Presario CQ62-23, my disabling the system key is: 83963414. What to do next? We have no user guides/manuals/cds, or any other information. on this laptop which is 4 years old & a Windows 7 Home Premium =)

    Hello

    Try to enter: 32641430

    Kind regards

    DP - K

  • Wireless problem Compaq Presario CQ62 220 sv here is the solution! for 220 sv!

    Hi, I need help! Fast please I have a compaq presario CQ62 and do not work wireless

    I installed the driver for the wireless, but do not work

    is a BIOS problem? or anithing alse

    Please I need help! Fast!

    Thanks, Alex

    Sorry for my bad English!

    FAST!

    Update > I enter the device maneger and network controller is not installed

    Hardware ID >

    PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
    PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
    PCI\VEN_10EC & DEV_8171 & CC_028000
    PCI\VEN_10EC & DEV_8171 & CC_0280

    Hello

    First of all, download and reinstall the Chipset driver from the link below.

    http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46940.exe

    When this has completed, restart the laptop.

    When windows has completely recharged, download and install the Realtek WLAN driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46673.exe

    Kind regards

    DP - K

  • I deleted the sound on my compaq presario cq62 I need to reinstall

    I deleted the sound on my compaq presario cq62 I need to reinstall

    Hello

    Go to the following site.

    Compaq - Support for desktop computers and laptops Presario. :
    http://h18000.www1.HP.com/CPQ-country/cpq_support.html?JumpID=hpr_R1002_USEN

    In the Find box, enter the number of the model of the computer, and tap Next.

    This will take you to the page with all the support options for this computer.

    Concerning

  • HP Compaq Presario CQ62 blank display, solid caps lock light light orange, solid f12

    Good afternoon

    Currently, I'm stumped on troubleshooting lights error code for a hp compaq cq62 customers. I tried the hard reset, the reinstallation of the memory and even plug the laptop directly into the wall instead of a surge protector with battery removed. I can't find any solution on the HP site or any other site of forum for this issue as to what a solid caps lock light and a solid orange light on the f12 key.

    Currently I think the customer may need a new back light system or a new processor. Before to come to this conclusion, I hope that there is a clear solution for my problem. Thank you for any assistance.

    Hello @NotURt3kSupport ,

    Welcome to the HP Forums!

    I understand you are having problems starting your PC clients laptop Compaq CQ62.

    A single glance on the caps lock light usually means it is a failure of the CPU and requires a replacement of CPU or the motherboard.

    Also try to go through these documents to resolve startup problems:

    Computer does not start and the lights blink or the computer will beep.
    Troubleshooting of the black screens with no start-up or start-up error message.
    Tests of hardware failures (Windows 7, Vista) or hardware failures (Windows 8).

    You can tell if the backlight is the issue or start by plugging in a VGA monitor to see if the screen is displayed or not. If this is the case, you have on the laptop display problems. If it isn't, you're dealing with a problem of CPU, GPU or motherboard.

    Also, it would be useful to know what product and the operating system you are using. For more information on the search for your model and product numbers, click here: How can I find my model number or product number? What version of Windows you are using, click here: Windows operating system am I running?

    In the event of hardware failure I suggest you contact the services options HP telephone support. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

    Hope this information helps!

  • can a Compaq Presario CQ62-209WM laptop PC play star trek online or eveonline?

    can a Compaq Presario CQ62-209WM laptop PC play star trek online or eveonline?

    To my knowledge, CQ62-209WM laptop must support the Eve Online and Star Trek Online games like the laptop meets both minimum and recommended requirements for these games.

    Here is the link that has the least & Recommended system configuration necessary to play Eve Online:
    http://support.eveonline.com/pages/KB/article.aspx?ID=124

    Here is the link that has the least & the recommended system configuration to play Star Trek Online:
    http://www.startrekonline.com/FAQ#19

    Here is the link that has the specs of the laptop CQ62-209WM:
    http://support.HP.com/us-en/document/c02159506

Maybe you are looking for