can't pc vista, sleep-even after restoration and even factory re - configure.

Similar Questions

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• I bought Windows Vista Home Premium and got a free upgrade to Windows 7. Can I install Vista on a second computer and still be legal?

  I bought Windows Vista Home Premium and got a free upgrade to Windows 7, which I have installed on Computer1.  Can I install Vista on a second computer computer2 and still be legal?

  Is same question with versions of Microsoft office, if I have multiple versions allowed to install an earlier version on a second computer and stay legal?

  No, unfortunately not, when you upgraded to Windows 7 indeed renounce you your right to use Vista. But keep the product key and Vista media where you need to perform a clean installation of Windows 7 again.

  For MS Office (according to license as some allow multiple installations) If this older version is not in use you can install it on this computer second no questioned asked.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My favorites have disappeared and I can not find them - I tried to restore and nothing is there.

  I tried to restore, and nothing is there. Please help me find where they might be saving too.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file

  See also:

  • http://KB.mozillazine.org/Lost_bookmarks
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Can't see the data partition after restoring the system

  Hello.

  I had installed Windows 7 on my computer and I had two operating systems of windows operating system. And I wanted to boom volume but I couldn't and I downloaded a program and crashed my both operating systems. And after that I used the hp recovery cd use cmd, System Restore. And after that, I got all the workers. But now I can't see my data partition. I can see the computer Manager, but I can't access it.  Please help Microsoft. :(

  Is the partition on the same drive as Vista?  If so I would try to extend the Vista partition to include the space in this partition "missing."  Maybe this process will add space on your system drive, and at least you will have access to it (even if it is not a separate partition that you wish).  I don't know if this will work if the system is not seen as a partition, but I guess it's worth a try.

  After that, my only suggestion is to backup your data and do a clean boot from the drive and format the drive and reset the partitions in the installation process.  This should solve this problem.  I wish I had a less drastic recommendation, but honestly, I know of no other way to solve this problem (if it does not solve the problem).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sector recovery Vista TTG boot after format and installing XP

  First machine is a DELL inspiron 1545
  OK, this is somewhat complicated and I tried a few options.
  I formatted the primary partition and installed XP after which discovered the recovery partition that I cannot now access via CTRL + F11, and a few other combinations I tried.

  I won access to the partition via ubuntu so I know it's all there and intact.

  I tried to use imagex to restore image files of vista on the recovery partition which they are 2 (spl_vista.swm spl_vista2.swm) so I used the order of REF. but I got a CRC error.

  I tried to use imagex to restore another image file in the HDDRE folder. WIM, but that the image has no MBR

  I was able to start the the recovery partation I discovered was a techguys recovery system by changing the active partition through diskpart, but he told me that he could not find the HARD drive, I also tried to boot to a DMS and had the same result.

  any ideas on the means may restore the vista on this machine?

  Hello

  We cannot help you difficulty dell recovery partition

  It's their recovery partition, not Microsoft

  Contact Dell for any additional assistance with their recovery processes

  _______________________________________________

  Try these methods to reinstall vista

  Contact the manufacturer of Dell and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Vista start not only restored at the factory and safe mode does not work

  Hello

  I have experience blackheads on the dell splash screen, then it continues to the f1 f2 to Setup because I don't have a floppy drive, it is okay to continue. On this screen but I have blue dashes experience everywhere in this moving around every 20 seconds or more. When I hit f1 I get a low quality graphics Windows load bar and then a black screen after 5 to 10 seconds. Followed by a blue screen of death with the code 0x0000008e. Then restart. I then tried the F8 key and restored in a last known point that worked, does not solve my problem. Tried to boot in SafeMode (normal) and I get the blue wheel scrolling as it's almost here, and then a reboot without explanation. Also, I tried to move the cards gfx and switching of slot machines, this is not having an effect. But I noticed when using a card, I get a quick 5 beep at startup, then using the other card it works fine. Is a card? This would have an effect on my boot because of the missing material? Help, please!
  Data sheet:
  Dell XPS 630i
  Quad Core - 2.4 ghz
  4 GB RAM
  Dual Nvidia 9800gt
  I have known 3 hard disks
  Windows Vista 32-bit sp1

  Hello

  Looks like a graphic problem

  beep codes are normally related material

  read below

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

• 2009 iMac has none showing after restore and hard disk crash

  My 2009 iMac running 10.9.5 Mavericks locked up and I had to restore it from backup. After I restored it, it made 2 backups and then crashed. When I tried to restore it again there is no hard drive available. I got when starting was a folder flashing with an exclamation mark. When I started a drive (10.6) there was no available hard drive. The Profiler system showed no applications and no hard drive. Does anyone know how ix, or it is not repairable? Thanks, DJ

  Reboot into Recovery Mode and then reformat the drive of DiskUtility in recovery. Try again.

• Only, I restored my iPod Touch 4 G. After restoration and reach the homepage, I chose restore backup. Which seems to work but now when I connect the iPod it takes me to the Welcome screen once again. Ideas?

  iPod Touch 4 G, 32 GB, BONE 6.1.6 help with iTunes on a computer Windows 10.

  I restored it and restore selected backup from the Welcome to your new iPod screen. That seems to work, except that it takes back me to the Welcome screen. I tried choose "restore from backup" again, disconnection and reconnection of the iPod, iPod off the coast and back, restart the computer and put the iPod into recovery mode to force it to restore a second time. Whenever I plug in the iPod, it takes me to the Welcome screen. How do I get past the Welcome screen so I can sync the iPod?

  Thanks for your help!

  Try DFU mode, then restore to factory settings / new iPod via iTunes

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  Do not restore sauvegardΘ yet. See if it works when the factory reset. It could be that there is corruption of the backup that is causing the problem.

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I got the msg BOOTMGR and the ctrl + alt + delete does nothing. Is there a way I can use my Vista to get a download and transfer to start to recover my Win 7?

  Can I use the Windows Vista download for use on my Windows7 restart/recovery? Geek Squad does not gives me a recovery disk when I bought the Win7 Dell Inspiron. The Win7 has shown with the BOOTMGR msg. I understand that if I get a msg to the computer placed in a mode F8, I can recover. Can U please help?

  Hello

  Problem is you on an installation of Windows 7, so you should post in the Windows 7 forums.

  Don't forget to contact Dell Support because they have methods to address this issue.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ---------------------------------------------------------------------------------------------------------------------------

  The methods below will show you how a repair disk to try to solve this problem and
  can be done on any computer with a CD burner running XP, Vista or Windows 7 as the
  process uses no files from the host computer. See "If you need a disk:"below. ".
  
  References to Vista also apply to Windows 7.

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Fix the Vista Bootloader of Windows (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  ------------------------------------------------------------

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager (Windows 7)
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  problems starting in Windows Vista (Windows 7)
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information"(Windows 7)
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  =========================================

  If you need a drive:

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.
  
  How to create a Windows 7 - use OPTION TWO system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Why after restoration and others doing to correct, the error code 0800x700b showing on the photo gallery?

  Whenever I try to open the photo gallery, the 0800x700b error code is displayed. I did the system restore. I followed other steps to resolve this... several times. It does not work. I need to make my pictures.

  Melba Hello,

  For problems with Photo Gallery, you can ask your question in forum Windows photo gallery:

  http://answers.Microsoft.com/en-us/windowslive/Forum/Gallery?tab=threads

  I hope this helps.

  Thank you.

• I can't get Vista allow Vipre to scan and download updates... VIPRE is compatible

  the program of my 2008 Vista data execution prevention keeps closing the Vippre program that performs the scan and update of the software of Vipre... I tried everythiny IE allowing to the program through firewwall to try to change the settings... nothing seems to work... Help!

  Hello

  I suggest you to contact vipre for better support:

  http://www.vipreantivirus.com/?gclid=CMTezKujp60CFcfe4AodOF68OQ

  It will be useful.

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• How to find the password to iCloud after restoring the factory settings.

  My wife has an iPad.  I stick with my iMac and had nothing to do with the implementation of its iPad.  She had a problem recently that would require an update of iTunes.  When the update has downloaded a message appeared saying "your iPad can't be updated; you need to restore it to factory settings. "We did the restoration and has a splash ACTIVATE IPAD screen.  He asks as the inside diameter and the password used to configure iCloud... which my wife do not remember.  He also says that my i.d. Apple (my email address) does not allow to open the iPad.  What to do?

  If you do not have credentials, start here: http://iforgot.apple.com