Compaq Presario SR5113: Ethernet connection problems

Similar Questions

• Compaq Presario CQ56 - :(wireless Internet problem

  Hey everybody,

  So I just joined here to see if anyone can help with my problem, because frankly, I'm out of options now about two weeks asking friends and colleagues and searching the Internet for answers to similar problems. I tried twice with the information I found on this site for quite some time and it does not work for me!

  In any case, I have a HP Compaq Presario CQ56 laptop. It has been implemented correctly when I bought it, everything worked perfectly. I managed to catch a virus that prevented me from even turn on my computer (which is strange, because I'm not a fool with computers, and I know what not to do/download sites to visit), so I had to restart my computer to stock, I used my Windows 7 disc, partitions formatted and installed windows again.

  Now, for some reason it doesn't connects wireless Internet. It connects when I have an ethernet cable connected, but it is not all networks, as shown in this screenshot:

  

  (And also here's a cute Bunny for your pleasure)

  So you see my problem it is very frustrating. I don't know what is the cause, but I guess it must be a driver problem? Which is why I write here, if this is indeed in the wrong section, please accept my apologies.

  Here is an another screenshots that can help, just in case:

  

  If someone could shed some light on the problem for me, or even to resolve, I'd be very grateful it is extremely annoying. As I said, it works fine when I have my laptop connected to the internet, when I'm in College, but when I come on a weekend, I can't put my laptop, because I only WiFi at home.

  Thanks for reading

  Hayley R

  You are the very welcome, Hayley.

  The problem is that the needs of the wireless (network controller) one adapter driver installed and here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  Once you install the driver above, the wireless should work just fine.

  Best regards

  Paul

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!

• Ethernet connection problems

  I just bought a Tablet from Lenovo TAB 2 10 - 30 and found that I can not get connected to the Internet because of problems with the power of the signal from my router. I have been using a PC for the year that I connect to the same router via an Ethernet cable, and it works very well, so I thought that I would just connect my Tablet Lenove in the same way. I have now bought a new cable (very long) Ethernet and mini-USB adapter, so it will connect on the Lenove tablet, I can get the * beep * thing to work. When I go into the settings, everything I see under "wireless network & ' is WLAN, but doen't seem to be an option to set up or recognize the Ethernet cable I connected on the tablet. Does anyone know how to get this tablet to connect to Internet with my Ethernet cable?

  Another point: I'm sure the first time I ever took the Tablet out of his box and he started, I saw an option for WLAN network or LTE. I guess (maybe), I need LTE option to establish an Ethernet connection (although I could esily be wrong about that), only this option LTE has completely disappeared off the coast of the machine. Or if it's there, I don't know how to access.

  Thanks Dave

  Yes, after some other investigation looks this tablet can not connect via Ethernet cable after all.

  Fortunately I managed to pick up a singnal Wi - Fi, so I think I'll be able to connect to the web in this way after all.

  Thanks for your help.

• cDAQ-9188 Ethernet connection problem

  We bought 2 cDAQ-9188 and I can't get them to connect to the computer via the Ethernet connection. I can make them work if I use a short cable (10 ft), but the location that I need them is about 180 feet away. When I do right click on network devices and select Find devices that it returns Nothing found. Is there any suggestions on what I might be wrong or what I should do to make them work? I'm running LabView 2010 SP1 and the drivers provided with the units of the cDAQ-9188.

  Of course, the PC Ethernet card we use is low. I have them connected to a router and placed near the PC router, and now, they work very well.

• Ethernet connectivity problem

  Dear Sir / Madam,.

  Whenever I insert my LAN to the Internet cable broadband on laptop computer Ethernet, my notification icon port does not detect and internet poster not only any connection internet. It detects that once I restart my PC.

  My computer laptop operating system. - Windows 7 Ultimate Service Pack 1 (x 86)

  Please indicate any solution to this problem.

  Thank you

  John

  Check applied in Windows or the BIOS power management settings.

  Some systems can disable unused LAN port to save power.

  Go to network and sharing Center > change adapter settings to check the status of the interface when it does not work.

  Some laptop manufacturers provide their own network connection management tools, normally accessed via an icon in the system tray, find the settings there.

• Pavilion dv 8000t and Ethernet connection problems

  so, I posted on this forum before and did not have the problem fixed. but here again is the problem.

  Before installing windows 7, I had vista and in order to get the entire internet, what I had to do is plug the ethernet cable. Now after installing windows 7 I plug the ethernet cable and still no Internet. Internet, I connect to is provided by my apartment complex. all that I was told to do just plug an ethernet cable as I did with Vista.

  I downloaded a new driver from this link provided by someone on this forum and it did not help.

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45671.exe

  After I installed the driver and rebooted and it always connects to the internet vis ethernet cable.

  I tried troubleshooting and he told me:

  connection to the local network does not have a valid IP configuration

  That's what I see when I have the ethernet cable is connected:

  device Bluetooth (personal area network)

  (heading RFCOMM Protocol TDI) Bluetooth device

  Intel(r) PRO/100 VE Network Connection

  Intel (r) PRO/Wireless 3945ABG Network Connection

  Please HELP, I'm tired of having to go into the lobby in my apartment complex to pick up wireless.

  Hello

  This file:

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45671.exe

  is driver for Intel wireless. He's never going to fix your problem.

  I don't know then my solution will work, but we can try something like this:

  At startup, press F8, and then choose Safe mode.

  Go to the Control Panel-> device-> maps network manager

  and find here Intel (r) PRO/100 VE Network Connection. Click with the right button of your mouse and choose uninstall the driver.

  Try to install the XP driver for this model:

  Intel(r) PRO/100 VE here

  When there's some sort of problems with installing and then try to run it in XP compatibility mode.

  Resources:

  How to run a program in Compatibility Mode in Windows 7

  Make older programs in this version of Windows

  Reboot your system, and this time it starts in normal mode.

• Ethernet connection problem

  Normally, I have an ethernet cable connecting my Time Capsule to my iMac... I have a Netgear router connected to my Time Capsule, and the Capsule is in Bridge Mode.

  Out of the blue, I get a "Ethernet has an auto assigned IP address and won't be able to connect to the internet" message on preferences network with the ethernet cable attached to my iMac.

  I can not connect the ethernet cable, normally attached to the iMac, a MacBook Pro, and the connection is perfect (so the cable is good).

  Also, if I connect to a Thunderbolt adapter ethernet cable and plug it on my iMac, the connection is ok.

  I restarted the iMac and reset the cable a few times without success... Don't know if there is a file preferably I should delete (or which).  Did a permissions repair, without a change in behavior.

  WiFi on the iMac works well...

  Thanks for any thoughts there...

  Bob

  Update: the computer seems unable to configure IPv4 using DHCP.

  When I configure IPv4 manually, I'm able to get the ethernet port working correctly...

  Thoughts?

  Bob

• HP Pavilion dv7/entertainment - Ethernet connection problem

  The computer was always well connected to wireless networks, but I moved to a new place and can't get my computer to connect to the internet. I ordered a former gateway wireless via amazon but sent back because I thought that the antenna did not work. However, now I am trying to set up internet via an ethernet cable and cannot.

  I tried two different cords ethernet without a bit of luck. Google research, I determined that there should be LED lights next to the port (?) Ethernet on the computer, but there is not all the lights on with a rope. I have tried countless attempts of troubleshooting and many "patches" of others, but nothing has worked. I even uninstalled and reinstalled the driver software of all the network/internet conncections via the HP Web site. I can't get the internet to work!

  I am currently connected to the personal hotspot that produced my phone, but I can't sustain that without exceeding data limits cell.

  Any help would be greatly appreciated!

  Hi, thanks for your answer!
  After all a lot of trouble, I have established that BOTH the router I purhased and the Ethernet cord I was good did not work properly! (The antenna on the router is malfunctioning and was working as the Ethernet cable when at a specific angle, which is why it seemed to work at first, but not after other attempts). I have since been able to get a new router and an Ethernet cord and am happily connected to Internet.

  Thanks again!

• Want 7640: Ethernet connection problems

  Just bought HP Envy 7640 on ebay and for some reason, it isn't to connect to the ethernet network. Wireless connectivity is fine but when I plug the ethernet cable I get no lights.

  I tried to replace the power cord and switch is still no luck! Whenever I restart the printer I briefly see the port Ethernet LED on but that it goes off.

  Tried restoring factory settings and restore the network settings, updated to the latest firmware, still no luck!

  Any help would be appreciated.

  Maybe that's why they resell it on eBay. If your really want Ethernet, return to the seller and try again.

• Compaq presario cq62 available memory problem

  HAV CQ62 with 32-bit amd processor windows 7. OK came with 4gig RAM.  SYSTEM to CHECK that this gives 4gig ram and the RAM available media 2.99gig. OK so update the 8gig Ram to run faster, but it always has in the area of the SYSTEM memory available is stil 2.99gig. Check the resource monitor and it is much too hardware reserved RAM greater than 5, 000mbites. Don't put the bios to F036 more later still no joy... So makes no difference if ram increass or decrease the maximum value available for use is still not more not less 2.99gig. How can I get this laptop to use more ram. Just won't happen and even went in the bios before and after upgrade it and problem still HAV run out of solutions, tried to change things in bios and tried mapping for ram, but this laptop can not find in the bios like in the series c700... must be a way easier to solve the problem and just ridiculous amount of ram reserved for material that cannot change. I have another laptop cq62 series processor is intel 64-bit win 7 and set at the same level system size of ram and it works well and only left 300 MB of ram reserved for strange material... I even swapped the sims that laptop and put in the earlier one and by the way the 4gig memory probs cq62 model is cq62-115tx single horn well resource monitor Ok AMD PROCESSOR has these numbers:-MATERIAL reserved 5131MB, in COURSE OF USE 1143 MB, updated THE 81 MB, STANBY 923 MB, 913 MB FREE and summarized the AVAILABLE States 1836 MB down caching 101MB, MO 36061 TOTAL, 8192 MB INSTALLED... SO if modified installed 4192 mb or 4gig ratio breaks down, but the MATERIAL RESERVE remains the same... OK if I PUT on 2GIG SIM in the phone starts not at all no matter what so help dilemma Please guys

  As long as you have a Windows license key for typing in the prompt, it should work.

  If the PC supports the 64-bit installation disk at startup I'm sure that all of the internal components will have 64-bit drivers.  Plug in the main series is the processor. If it is not 64-bit, you can go no further.

  You cannot run the disk 64-bit from the desktop. You will have to boot from it.

  Paul

• My Compaq presario must be connected to the network for a long time before it can start.

  It flashes green light and tyhen back when its ready flashing will stop. What is a power unit failure?

  Disconnect your PC from the network.

  There should be a switch on the power supply. See the image below. It is the red switch above the LED. You will need a flat head screwdriver to change its position.

  

  Leave the current (voltage) setting to the other setting and then drag it to the initial position (local network voltage). You have just reset your PSU with the procedure I described. If your PC is always the same question, then replace with a new PCU.

  Best regards
  ERICO

• Problems with Compaq Presario 5BW220 RAM

  This office is 8 years old and supposedly supports 512 MB memory SDRAM PC100.

  Recently, I worked on this for my son-in-law.  It came with 64 MB of SDRAM PC100 and Windows Millennium Edition.  I tried to install 2-256 MB memory SDRAM PC133 maximum amount supported RAM, but it refused to start.  I replaced every 256 MB module with a 128 MB PC100 module and managed to do start.  I expected to read 384, but he will read only 256 MB.  I had not all PC100 256 MB modules to use.  I finally installed modules from 2 to 128 MB PC100 and he left like that.

  I never had a problem in the past with an old desk accepting a combination of PC100 and PC133 modules, so it was a first for me.

  The Compaq Presario 5BW220 have a problem with the acceptance of this combination, and she actually says a maximum of 512 MB?

  This could be useful in the future:

  http://www.crucial.com/

  If you click "scan my system" he can tell you all sorts of things on the RAM.

  I have a system built home (with all the paperwork by moving the boxes...) who had a chip spoil.  I could not remember what RAM took it and I didn't go root through the boxes in the garage. =)

  Their scanning system could not see what kind of memory I had, but he told me exactly what my motherboard could support. (Type and max of 1 GB per slot)  He even suggested several configurations of memory.

  Once I saw what he said, he had, I remembered that I had bought before and it didn't fit.

• Compaq presario v 3780TU: Base System Device Driver missing

  product compaq presario v 3780TU

  problem - the two driver missing basic systems, audio device does not not only integrated speakers work not, works of headphones

  problem when I upgraded to the Windows OS 10

  first base h/w device id is

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  ID of second base system device h/w

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  driver audio h/w id is

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD & REV_1000
  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD

  Please help solve

  Hello:

  For basic system devices, you need this driver...

  This package contains the driver and the host controller Ricoh 5-in-1 card reader for laptops models and operating systems.

  File name: sp37614.exe

  For the other device you need this driver...

  This package contains the driver for the Conexant HDAUDIO Soft Data Fax Modem with SmartCP (CX20548) in the notebook models and operating systems. This driver enables the remote access feature and provides a UI for formodem.

  File name: sp37817.exe

• Compaq Presario - problem connecting to Wifi

  I have a compaq presario, the name of the product "Presario C700" and the p/n' FE934UA #ABA. "The operating system is Windows Vista. I have Comcast internet and the router I am using is Netgear. Recently, I moved into a new place and will have problems connecting to Wifi at home. I've had this laptop for several years and have been able to connect to some wifis in the past, but there were moments where I was not able to connect to the wifi in some public places. I am able to connect to the wifi on my phone and another laptop, but not this one. I tried to reset the router and many other measures, but nothing seems to solve the problem. Whenever I try to connect, it says that the signal is excellent, but it fails to identify the network and said that "the router is unavailable. I already called my router company, but they were not able to solve the problem. The only way I can connect to the internet using an ethernet cable.

  I would really appreciate help on how to connect to wifi. Thanks in advance!

  Hello:

  What model of wireless network card your laptop there?

  If it uses an Atheros AR5007 wireless network card, see if installing this driver solves the problem.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_108905_1