Compaq presario cq62 available memory problem

HAV CQ62 with 32-bit amd processor windows 7. OK came with 4gig RAM.  SYSTEM to CHECK that this gives 4gig ram and the RAM available media 2.99gig. OK so update the 8gig Ram to run faster, but it always has in the area of the SYSTEM memory available is stil 2.99gig. Check the resource monitor and it is much too hardware reserved RAM greater than 5, 000mbites. Don't put the bios to F036 more later still no joy... So makes no difference if ram increass or decrease the maximum value available for use is still not more not less 2.99gig. How can I get this laptop to use more ram. Just won't happen and even went in the bios before and after upgrade it and problem still HAV run out of solutions, tried to change things in bios and tried mapping for ram, but this laptop can not find in the bios like in the series c700... must be a way easier to solve the problem and just ridiculous amount of ram reserved for material that cannot change. I have another laptop cq62 series processor is intel 64-bit win 7 and set at the same level system size of ram and it works well and only left 300 MB of ram reserved for strange material... I even swapped the sims that laptop and put in the earlier one and by the way the 4gig memory probs cq62 model is cq62-115tx single horn well resource monitor Ok AMD PROCESSOR has these numbers:-MATERIAL reserved 5131MB, in COURSE OF USE 1143 MB, updated THE 81 MB, STANBY 923 MB, 913 MB FREE and summarized the AVAILABLE States 1836 MB down caching 101MB, MO 36061 TOTAL, 8192 MB INSTALLED... SO if modified installed 4192 mb or 4gig ratio breaks down, but the MATERIAL RESERVE remains the same... OK if I PUT on 2GIG SIM in the phone starts not at all no matter what so help dilemma Please guys

As long as you have a Windows license key for typing in the prompt, it should work.

If the PC supports the 64-bit installation disk at startup I'm sure that all of the internal components will have 64-bit drivers.  Plug in the main series is the processor. If it is not 64-bit, you can go no further.

You cannot run the disk 64-bit from the desktop. You will have to boot from it.

Paul

Tags: Notebooks

Similar Questions

  • Wireless problem Compaq Presario CQ62 220 sv here is the solution! for 220 sv!

    Hi, I need help! Fast please I have a compaq presario CQ62 and do not work wireless

    I installed the driver for the wireless, but do not work

    is a BIOS problem? or anithing alse

    Please I need help! Fast!

    Thanks, Alex

    Sorry for my bad English!

    FAST!

    Update > I enter the device maneger and network controller is not installed

    Hardware ID >

    PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
    PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
    PCI\VEN_10EC & DEV_8171 & CC_028000
    PCI\VEN_10EC & DEV_8171 & CC_0280

    Hello

    First of all, download and reinstall the Chipset driver from the link below.

    http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46940.exe

    When this has completed, restart the laptop.

    When windows has completely recharged, download and install the Realtek WLAN driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46673.exe

    Kind regards

    DP - K

  • Compaq Presario CQ62-209WM turns is not on

    I have a Compaq Presario CQ62-209WM.

    I recently had a problem with this computer where the screen would go completely black during start-up or process during recovery from sleep mode.

    I updated the Bios and the problem disappeared, but now there's another problem.

    Because the Bios has been updated, the computer turns on if the power cable is plugged. But if I turn it on and then unplug the cable, it works very well. It does not lose power and the battery holds its charge normally.

    No idea what could be causing this?

    Try this it should help

    http://support.HP.com/us-en/document/c01684768

  • my bluetooth does not work on my compaq presario CQ62

    my Bluetooth is not on my compaq presario CQ62

    Hello

    1. what exactly happens when you try to connect the Bluetooth device on the computer?

    2. you get any error message?

    3 have there been recent changes to the computer before the show?

    I suggest to follow the steps provided and check if it helps.

    Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

    Follow the link below a convenience store opened.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: If the problem persists try update the driver:

    a. click the Start button.
    (b) in the search box type Devmgmt.msc and then press ENTER.
    c. Select Bluetooth peripheral device and right click on it.
    d. now, select Update.
    e. restart your computer.

    Method 3: also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

    Add a Bluetooth device to your computer:

    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    Change settings for a Bluetooth compatible device:

    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

    Hope this information is useful.

  • Power on laptop Compaq Presario CQ62 of password

    I have a Compaq presario CQ62 laptop requireing a power on password after 3 attempts gives key number: 64560868 someone help out me? Birdy

    Hello

    Try to enter: 71448268

    Kind regards

    DP - K

  • disk failure hard compaq presario cq62-231nr

    My compaq presario cq62-231nr (product # XC434UA #aba) stopped working last week and I took it into the store of the computer it is diagnosed. They said that the hard drive has failed and they were unable to get all the files out of it. They wanted about $200 to fix so I just brought home. I bought a hard drive to it (500 GB hitachi) and when I install it myself. I have 4 dvd recovery disks that I made for her when I bought it there are 1 1/2 years. Never done this before so I am a little worried about smooth how it will go. My questions are:

    1-will the recovery discs works

    2 - 500 GB hard drive will I put actually no difference from the old hard drive was a 320 GB

    3 - What steps should I take after I put my hard drive in and start it (insofar as the use of the recovery discs)?

    4 - I need a key at any time in this process? I don't have one that I know of.

    Any help is appreciated!

    Hey, Dan:

    You are the very welcome.

    You have almost...

    When you turn on your PC for the first time after installing the new hard drive, you must press the F9 key to the HP welcome screen.

    This will give you a few startup options.  Your DVD player should appear as one of these options.

    Don't do anything about the selection who again. First, open the DVD drawer and insert the diskette 1 of your set of recovery disks. Close the door and wait a moment – just a few seconds.

    Then select the DVD - ROM drive in the list of the bootable devices in the list of startup options.

    Follow the instructions on the screen.

    You never know how long will last the electrical components.  This is why it is always advisable to keep the backup files.

    There's an old saying... "It is not a question of if a hard drive will fail, but a matter of time."

    Paul

  • Compaq presario cq62-219wm cpu update

    We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

    davidljtn44

    You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

  • I deleted the sound on my compaq presario cq62 I need to reinstall

    I deleted the sound on my compaq presario cq62 I need to reinstall

    Hello

    Go to the following site.

    Compaq - Support for desktop computers and laptops Presario. :
    http://h18000.www1.HP.com/CPQ-country/cpq_support.html?JumpID=hpr_R1002_USEN

    In the Find box, enter the number of the model of the computer, and tap Next.

    This will take you to the page with all the support options for this computer.

    Concerning

  • How can I install Windows XP on windows 7 laptop Compaq Presario CQ62-215DX?

    I want to install XP on my laptop (laptop Compaq Presario CQ62-215DX) which has Windows 7... give me some advice please

    You replace the startup disk in the BIOS cd. Then boot from the XP CD. And press a button when it tells you. However, he will wipe away Windows 7. So, if you want anything copy everything you want (with the exception of programs), before formatting the hard disk.

    NOTE: XP has no drivers for most of whats on the system (LAN/Sound/player card etc.). So if that is the only computer you have, go to HP site for this laptop search, download drivers and copy them into something. Before you begin. Or you won't get back on the internet...

    Also NOTE: If the disk hard in it is SATA, you will need to disable the AHCI in the BIOS (change it to IDE mode). Or XP will crash before you get to the configuration screen. Unless you download the SATA drivers, unzip / extract and add them when it says press F6 (on a floppy disk).

    The XP CD does not have SATA drivers on it either. If you do not add the SATA drivers during installation, do not change this back to AHCI after installing XP. Or it will crash

    In addition, make sure that you have a XP key. A key to windows 7 will not work

  • can a Compaq Presario CQ62-209WM laptop PC play star trek online or eveonline?

    can a Compaq Presario CQ62-209WM laptop PC play star trek online or eveonline?

    To my knowledge, CQ62-209WM laptop must support the Eve Online and Star Trek Online games like the laptop meets both minimum and recommended requirements for these games.

    Here is the link that has the least & Recommended system configuration necessary to play Eve Online:
    http://support.eveonline.com/pages/KB/article.aspx?ID=124

    Here is the link that has the least & the recommended system configuration to play Star Trek Online:
    http://www.startrekonline.com/FAQ#19

    Here is the link that has the specs of the laptop CQ62-209WM:
    http://support.HP.com/us-en/document/c02159506

  • Compaq Presario CQ62-23 reset admin password.

    After 3 attempts to reset an unknown/forgotten administrator. password on my sons Compaq Presario CQ62-23, my disabling the system key is: 83963414. What to do next? We have no user guides/manuals/cds, or any other information. on this laptop which is 4 years old & a Windows 7 Home Premium =)

    Hello

    Try to enter: 32641430

    Kind regards

    DP - K

  • Where to buy the new screen? Compaq presario cq62-206SO

    Model Compaq presario cq62-206SO

    The best would be 100 USD or less shipping and display. I live in Norway.

    Note * I looked on eBay but I find not all screens for my model

    Try laptopscreen.com.  They ship all over the world, and the screens are usually less than $60.

  • Compaq Presario CQ61: BSOD - memory management error

    Hello

    So, I have my other laptop, Compaq Presario CQ61. For like 5 or 6 months I had a lot of problems with it, like freezes, BSOD-s and not to forget that convenience store was down. I transferred all personal files on the external HARD disk and decided to reinstall Windows (7 - legal copy), hoping that the problem will be solved, but in vain. Finally, I installed Windows 8 Pro, because as said in the forums, people, it may be a problem with the installation disc. For like 4-5 days my HP laptop was running well, all the updates that are installed (haven't seen it lately), I just thought it was a miracle and my problem is solved. Today, he appeared. BSOD. After reinstall or to install both versions of Windows, I had, it is my belief that it is a hardware problem. I tried the memory management test and the result was something like "problems were found, contact your manufacturer. So my question is, is it a problem of RAM or a HARD drive? I've heard both versions, and if someone had in the past has the same symptoms as my laptop and he managed to cope, please enlighten me as well. Thanks in advance.

    Hi @Calin1 ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your Compaq Presario CQ61 and works very well, and then get the BSOD and stop. I recommend to restore the default BIOS settings if you can get it to go to the screen. You could restore the BIOS with this document by selecting the reload the default BIOS settings. No restoration. Restore default BIOS is necessary because I think that this will solve the BSOD.

    Here is a link to solve the BSOD if the restoration of the BIOS does not help.

    If this does not help at the end of the document it tells you to do a test equipment.

    The hardware test indicates if any parts are missing or have problems.

    I hope this helps.

    Thank you.

  • Compaq Presario CQ56 - :(wireless Internet problem

    Hey everybody,

    So I just joined here to see if anyone can help with my problem, because frankly, I'm out of options now about two weeks asking friends and colleagues and searching the Internet for answers to similar problems. I tried twice with the information I found on this site for quite some time and it does not work for me!

    In any case, I have a HP Compaq Presario CQ56 laptop. It has been implemented correctly when I bought it, everything worked perfectly. I managed to catch a virus that prevented me from even turn on my computer (which is strange, because I'm not a fool with computers, and I know what not to do/download sites to visit), so I had to restart my computer to stock, I used my Windows 7 disc, partitions formatted and installed windows again.

    Now, for some reason it doesn't connects wireless Internet. It connects when I have an ethernet cable connected, but it is not all networks, as shown in this screenshot:

    (And also here's a cute Bunny for your pleasure)

    So you see my problem it is very frustrating. I don't know what is the cause, but I guess it must be a driver problem? Which is why I write here, if this is indeed in the wrong section, please accept my apologies.

    Here is an another screenshots that can help, just in case:

    If someone could shed some light on the problem for me, or even to resolve, I'd be very grateful it is extremely annoying. As I said, it works fine when I have my laptop connected to the internet, when I'm in College, but when I come on a weekend, I can't put my laptop, because I only WiFi at home.

    Thanks for reading

    Hayley R

    You are the very welcome, Hayley.

    The problem is that the needs of the wireless (network controller) one adapter driver installed and here is the link for the driver you need.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

    Once you install the driver above, the wireless should work just fine.

    Best regards

    Paul

  • Compaq Presario CQ62 out mode 'sleep', even after hard reset

    I have a laptop Compaq Presario CQ61-411WM. He won't have fashion 'sleep'. I removed the battery and the power supply. When it connect every thing upwards. And run it, the light flashes on the laptop. No matter how many times press. It won't wake up.  I can't boot my laptop. Can someone give me a solution to this problem?

    Hi melvingene, welcome on the basic behavior of HP you describe is more than a failure to market, as opposed to stuck in mode 'sleep'. With the flashing lights, it might alert you to a specific hardware problem. Try the troubleshooting described in this paper: computer does not start and the lights blink or the computer will beep

    If you do not started, you probably encounter some kind of hardware failure.

    Let me know how it turns out.

Maybe you are looking for

  • opportunity iPhone 6, app store is in Korean, so I can't use it

    I just bought an iPhone used 6 and synced it with my iCloud... but when I try to use the App store, it's all in Korean so I can't use it.  I have to clear the phone and start from scratch?

  • Qosmio G20 Media Center crashes when using video or TV

    Since April 2006 whenever I try to use the Media Center it crashes when I try to play a DVD or to use the TV. It seems to be a video display problem.Can someone advise me on this?

  • How to connect external contributions in elements of cluster?

    Hi all I have a Subvi have an embeded cluster I want to control the item "enable" from the outside, but I can't wire the input on the element enable icron Terminal. So, how can I control the individual element of a bunch of outside?

  • How to associate an extension of an executable file?

    Is it possible to associate a file extension specific to an executable created with labVIEW? And of course to get the corresponding properties: specific icon, opened by double-click...) CC

  • global and DataSocket

    My problem is the following:I do readings of several machines. Reading is made through a serial (and that's why I use the VISA service). These readings are collected by an agent (in this example, Simul machines.vi) who is responsible for distributing