Compaq sg3-110uk office: reistall the new disk

Similar Questions

• Is it possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition?

  Partitioning of a Windows 7 computer

  On a laptop Windows 7 HP, it is possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition? I know I can run Win7 XP mode, but many prefer a base XP environment. Yes, I have new copies unregistered XP and Office 2003.

  TIA,

  Steve

  Besides Partition Master you can also use Windows 7 "Disk Managment" to shrink the partition of Windows 7, create a new partition of the space "unallocated", and then do a formatting NTFS "Full".

  Installing dual Boot with Windows 7 and XP
  (Read each method in this article and that fits your needs)
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  EasyBCD allows to appear more user-friendly boot menu:
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• Time Machine the new disk transfer has not moved all the time

  I have a Time Machine backup to an external drive. It works very well. However, he was beginning to run out of space, so I bought a new, bigger HD.

  I followed all the steps of Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support.

  I then waited 12 hours for that copy.

  Around midnight, I noticed the copy is complete. There was a message that iWork had not been copied because he needed a different operating system. But I rejected. There are no other messages.

  I changed the Time Machine preferences on the new disk. And fell asleep.

  This morning, I walked into a Time Machine.

  Only the first date from July 2014, was on the new disc of TM. Then there was five times after midnight when the new drive was saved.

  But there is nothing in any of the years between the first date and after midnight.

  I know that there are hundreds of TM captures on the original disc. And I've used them very well.

  I tried to copy individual files from the old drive to TM to the new, but it is not possible to "change the backups."

  10.10.5 system

  What should do?

  While in Time Machine, to see all the volumes mounted shift - command - c.    Information derived from Linc Davis.

  If this does not work, try to copy the file to disk/restore utility using to copy the backup to a new location. Please note that this will reformat the destination partition.

• Disk GUID partition? and the new disk utility

  The new disk utility Version 15.0 delivered with El Capitan, differs from earlier versions of disk utility.

  Most will have noticed the absence of the utility to fix permissions.

  However, check the type of disc format is a little more difficult and well.

  The player must be selected, and then the information button must be selected.

  Then, you must look at the "File System" line to see whether or not it is OS X Extended.

  Then you look at the line "Logged" to see if it is 'yes' or a 'no '.

  How do we know if it's a GUID partition or a utility with the new APM partition?

  Sorry to contradict you, but general information about the disks are always where they used to be

  

• reuse the license of Windows XP from the old office to the new office

  We have 4 old desktop computers with windows xp I want to reuse the license of Windows XP from the old office to the new office

  I bought a HP desktop computer and dell preinstalled with Windows XP. The office has not worked for a few years, he has the processor are P4 and slow work.

  I recently bought a desktop computer and wanted to know can I use the same license key to get Windows XP installed on my new desktop computer.

  Note: I have lost my original installation of windows CD but have the office and Windows XP product code is available to me.

  The old HP desktop and dell came with a license with the sticker on the side.

  Any PC which came with a sticker with a key to activate product on it has a license that is related to this PC (and only this PC) for ever. It is not legal to install on a PC using the key videos from another PC.

  If the PC you want to install XP on still has its sticker, then as much as you have a compatible installation XP CD, XP can be re-installed using the key on the sticker.

  Only commercial versions of XP can be moved from one PC to another. With the commercial versions, the activation key came with the media, not on a label stuck on the PC.

• [CARS] Add the new disk in the database running environment

  Hi all

  I want to ask a question about oracle RAC especially to add a new disk.

  Here's the situation for existing oracle RAC

  1. There is 1 oracle clusterware (CRS), ASM and 2 node RAC

  2. There is a demand to add a new disk to existing diskgroup

  3. all CRS, ASM and RAC is in the online state

  I read document oracle (How to add a new disc to year Diskgroup existing RAC Cluster or stand-alone Configuration of ASM (Best Practices).) (Doc ID 557348.1()

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Thank you

  Adrian

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  No, you need not bring down the ASM or DB

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Yes, you can add the disk, ASM automatically rebalance and share the workload on the new disk.

  http://docs.Oracle.com/CD/B28359_01/server.111/b31107/asmdiskgrps.htm#OSTMG10070

  There are number of blog posts about adding disks in a diskgroup

  MRMESSIN Oracle Database Administration: Add or remove disks from the ASM disk on the database group active

• Copy the old Time Machine files to the new disk TM

  Sorry people, I have to ask two (related) questions:

  (1) I have a WD My Passport for Mac drive connected to an Airport Extreme and 2 Macs use for backup via Time Machine. Now, the disk is full. I bought a WD My Book for Mac drive with a capacity of 4 TB and am ready to go.

  Question: can I copy the old files of Time Machine on my new book?

  (2) until now 2 different Macs used the My Passport as a Time Machine drive with no problems.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  Thank you very much for your help!

  Question: can I copy the old files of Time Machine on my new book?

  Yes you can, but there is a lot of work, a little complicated, time consuming and not worth the effort for most users.  The main reasons for this are...

  (1) the older backups will take a good amount of space on the new drive, limiting the space on the disk again.

  (2) Time Machine backups for the old files will continue... it will make a new copy of every Mac and then go forward again with incremental backups.

  A better plan would be to keep the old drive on hand for a few months, in which case you need to go back and look for a file. After a few months, you will have a beautiful story from backup to the new hard drive and no need of older backups so you can remove the old disk and keep around as a spare part or use it for other purposes.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  While you can partition the drive and save each Mac to a separate partition if you wish, there is really no need to do this since Time Machine will automatically create separate for each Mac backup files.

• Satellite Pro M40, failure of the hard drive - the new disk restore disk?

  Hello

  My Satellite Pro M40 hard drive died and I want to install a new drive. Unfortunately, my old drive is 60Gig and the Web of Toshiba parts site has only 40 GB or 80 gig drives.

  I have problems with the recovery disk if the hard drive is not exactly the same thing?

  Your advice would be appreciated.

  C

  No, he should t be any problem with the Toshiba Recovery CD.

  On the recovery CD, you'll find a Windows OS, Toshiba drivers and utilities and software further.
  These entire applications are packed into image files.

  You should only be sure that the HARD drive is compatible with your laptop and it will be recognized in the BIOS.
  Then simply to boot from the recovery and installation CD must start.

• How to transfer files from old PC of office to the new Satellite L750?

  Hi everyone - starting at this site so be gentle with me please.

  Specifically, I want to ask: (a) Will the MS Word 7 Starter, which is already installed on my computer Toshiba laptop accept a lot of files from my old Desk Top for most Word documents? What kind of capacity has the Starter? What is the best device to use - a portable hard drive? USB? Discs?

  and

  (b) how to retrieve my Bing toolbar? Currently, I don't have a toolbar that displays the file, new, cut and paste at all. I have a space of Bing search on my desktop, but nothing else except a toolbar at the top where I type addresses located on the side until now at the top right with host, Star and a cog. Higher than ago valued one minimize, maximize and cross to close.

  Thank you very much

  RR

  Hello

  All word documents are compatible with any Microsoft Office Word application.
  If you used old software in Microsoft Office 2003 and now want to use an Office 2010 or later server MS Office 2007, then you will need to install a patch Ms.
  But usually, you will receive a notification message if necessary.

  On moving the files to the other computer.
  The best and easiest method to move files is the use of external HDD USB or memory flash stick, copy the files to USB HDD and then move it to the new laptop.

  That's

• Install the new disk on Tecra M2

  Hello

  I have a laptop Tecra M2 HARD drive abandoned a year ago and served in a drawer since I'm keen to get it up and running again, but wonder if I should buy a HDD that is specific to use in it and what is involved?

  My interpretation of it is that it's an IDE HDD that is needed, any 2.5 "IDE HDD off ebay will work or do I need to buy a specific brand, because they are not all in the United Kingdom listed for the M2.

  If a generic IDE HDD will work in the laptop (like this http://cgi.ebay.co.uk/HITACHI-30GB-IDE-ATA-PATA-2-5-LAPTOP-HARD-DRIVE-HDD_W0QQitemZ320332706439QQcmdZViewItemQQptZUK_Com puting_HardDrives_RL? hash = item320332706439 & _trksid =p3286.c0.m14&_trkparms=72%3A1300|66%3A4|65%3A12|3 9% 3 a 1 | 3A 1318 240%) are additional media required or should he just fit into the laptop?

  Then, once I inserted the HARD drive in the laptop computer and turned on, is there anything else necessary or should just be able to get to the top and running with a disc o/s?

  Thank you very much in advance for your help.

  Hello

  You are right. Tecra M2 must 2.5 IDE HARD drive and you can use it on eBay, but if you must buy new HARD drive I recommend buying the HARD disk with the largest capacity supported. Tecra HDD supports 30 GB HARD drive; 40 GB; 60 GB; 80 GB capacity.

  Tecra M2 is cute laptop and if you want to use it for a longer period of time buy 80 GB and be happy. You will have enough space to save a lot of different data.

• Satellite Pro L20 - is MS Office on the recovery disk

  Hello

  This is my first time on this forum and I have little technical knowledge - please be gentle!

  I have a portable Satellite Pro L20, who is now 4 years old (I got it in November 2005).

  It has been running very slowly during the past year, so I removed all the software I use is no longer, have backed up all the files that I need to keep and defragment the hard drive.

  I have not really noticed a difference in the speed, I understand that I can now try to format the hard drive and reinstall windows using the product recovery disc.

  When I had first laptop, all I had to do was press the switch, enter a computer name and a couple of passwords and it is very well loaded with Office 2003, he waits for me to use!

  Could someone tell me if the office is on the recovery disk?

  It is said that a 2003 Note is there and I have a code for it, but don't talk about Word, Excel, Publisher, or PowerPoint - that I use on a daily basis.

  I looked on the CD-ROM of the additional software that comes with the laptop, and it doesn't seem to be there.

  Your help will be very appreciated.

  Thank you.

  Hello

  As much as I know Microsoft Office has not been installed on the Satellite Pro L20.
  Only the OneNote2003 Office was delivered with this laptop.

  But this isn't the same OneNote and office are two different software!

  Don t mix it!

• O/s do not recognize the new disk capacities

  I upgraded my gateway laptop hard drive of the M series to a larger disk. I got the new drive image so everything, including OS vista family premium is now on the new drive. Everything works fine, but the new capacity of the new drive does not appear in 'my computer '. The new drive and ability is recognized by the BIOS but it is not recognized in disk management and as I said in my computer. So, I have no access to the entire disk. I upgraded from 160 GB to 750 GB.

  Thank you!

  JMMG

  What is the error message that you are gettring?

  These might help:

  Troubleshoot "access denied" when opening files or folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  How to take ownership and grant permissions in Windows Vista
  http://www.mydigitallife.info/how-to-take-ownership-and-grant-permissions-in-Windows-Vista/

• Files on the old drive will not be transferred to the new disk

  I use Lightroom CC 2015.5.1 on a Mac. Recently came close to running out of storage so I bought a new bigger external drive. My goal was to spend all her: it's a RAID drive so I tried the redundancy. Initially, I made the mistake to copy the old file during my internal drive structure where most if not all of the old structure has been using the Finder, rather than Lightroom.  I tried to resolve through Lightroom, which of course did not work.  I backed out of it, by removing the drive from Lightroom, then I deleted all the files of the new command using the Finder. Then I reconnected the drive to Lightroom and tried to make a correct move to the new drive. About 10,000 files moved very well, 4 000 do not have. Most of the time those who did not move are older jpg.  I tried to move the folders individually and the pictures individually to anything will do.  I went back to these files on Mac and could see that they existed, but they move in Lightroom. I don't get question marks that would indicate a simple broken link.  He seems to think that the photos and folders already exist and are duplicates, so even if they don't and are not.  I unchecked the box to prevent the movement of suspected duplicates but it did not help. I have a variety of error messages depending on how I tried to go on this issue, the simplest which is he who says that the files can be moved with a list of files which have not moved. It is not a problem of miniature because I can open them from their original location by Lightroom and the Finder out of Lightroom.

  Any ideas?

  -Greg

  What I (and I follow the instructions above) copy these files on my hard drive of laptop computers or move them, without interfering where all my photos are stored (which IS on my DHM).

  If you mean that the Lightroom catalog file, yes you can move it around on your hard drive (it is best to place it in an empty folder) and double-click it to open it. (By the way, even if you move your catalog file to an external hard drive, you can always use Lightroom, it will create a new, empty catalog on your internal hard disk)

  If you talk about the photos, you will need to move photos using your operating system and then in Lightroom to reconnect as explained here: Adobe Lightroom - find folders and files moved or missing

• Add the new disk group to the existing group

  Hello world

  I have a Dell T310 server with a PERC 6 controller. My current setup is:

  Disk 0-1 TB

  1-1 TB drive

  Players above are mirrored and partitioned the drive C and D.

  The first problem I have is the drive C: is 40GB (from the factory) and is running out of disk space.

  I bought 2 2 TB drives and was hoping to install readers, their mirror and more 1 TB disks and use the disks of 2 TB as the new D: - I would image current data on D for new readers.

  I have installed 2 new readers (2.0 TB), but when I go into the settings of the raid controller I am only able to assign spare readers?

  Can someone please let me know what I am doing wrong?

  I already have a full backup of the server.

  Thank you.

  CSFD

  Start CTRL-R, VD MGMT, highlight the controller in the left upper corner, F2, Create/New. (Don't forget to select advanced options and Initialize boxes.)

• How to restore Vista on VAIO VGN-NR285E the new disk

  My laptop has a new drive after replacing the damaged original disc. The new drive is detected by the BIOS and the works.
  I'm trying to recover the original Vista operating system and drivers with the Sony Vaio recovery CD of for the VGN-NR285E. The recovery discs are looking for a copy of the Vista operating system which I did more. If I ignore this message and try to do a full restore CD spins for a long time and nothing happens.

  How to restore the original image of Sony VAIO comes with the recovery on a spare CD when I have no backup?

  Hello Nolodev,
  If you have created a set of recovery software at startup. Press on enter and choose launch VAIO Recovery Center.
  Once in Recovery Center choose complete system recovery.

  Complete recovery system will build the C partition, create the recovery partition and install the software in the box settings.