O/s do not recognize the new disk capacities

Similar Questions

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• C4385 does not recognize the new router

  Just changed internet service providers.  Although I used this vendor before and not had any problems with my printer, I now have a problem.  My C4385 will not recognize the new network.  Hp network connection software that I run has no effect.   It will not detect a network even if my computer shows an excellent connection to the network.

  When I run the wireless network test report it shows "FAIL" next to "Network Name (SSID) Found."  The recommendation is to "check that your HP printer (SSID) name exactly matches your name (SSID) wireless router.

  I am completely baffled by the present.  I've seen other questions that are similar to this, but none that refer to my model exactly.  Any help is appreciated.

  Please, try the following:

  1. disconnect the USB cable from your printer

  2. make sure to delete any previous copies of your HP printer from the printers (in Control Panel) screen

  3. restart your PC

  4. under the printers screen, enter the following print server properties screen:

  XP: File > print server properties

  Vista: right click on the area of the screen information, and then select run as administrator > print server properties (law as Administrator option will not allway appear)

  Win7: Select any other printer in a left click and you will see the properties of the print server to the Menu bar top

  On the Ports tab, be sure to remove any existing TCP/IP port.

  5. remove temporarily disable your firewall software

  6. start the installation and select reconfigure the network connection / add a device.

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.

• instalded new HARD drive, do not recognize the system disk

  I had to replace my hard drive. what I did. implement system sisc restarted.  no system found, just saying., what can I do to make the system disk.

  Of course there is no system found; It's a blank hard drive.

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?

• Historical files Windows 8 will not recognize the new external hard drive

  I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

  I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

  I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

  I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• Win XP does not recognize the second disk in the Qosmio F30

  Hello.

  You have a problem...
  After using the recovery disk WinXP MCE does not recognize! second HARD drive.

  I mean in the Device Manager it's ok I see 2 hdd... but in his only C:\ Explorer

  Utilits RAID recognize also second HARD drive.
  But I'm going to use this HARD drive not for mirorring... I need this second HARD drive as separate HARD drive.

  Could someone help me solve this problem?

  Just format the drive and make it ready for Windows to use.
  Go to control panel-> administration-> computer management tools-> Storage-> disk management

  Here you will find all the options necessary to make your second HARD drive in Windows.

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!