compare items
How do I comáre elements in a table and a T/F output? I want to stop my time loop IF two elements in the array are equal.
Like that with a tie and a function or the array elements. Make sure that the equal function is defined to compare the items and make sure that the type of data you are comparing is an integer type.
Tags: NI Software
Similar Questions
-
Evaluation period for the stage of field custom object compare?
I've never used an evaluation period during a stage of field of the custom object to compare on the canvas of the campaign and I want to confirm that she will be as I wait for him.
We have a campaign that will send an email in nine batches, each a week after previous. I have a custom object with a field that contains the batch number (1-9) and I put nine steps to compare items customized on the canvas. The first checks to see if batch = 1, the second batch = 2, etc. I added a trial period of 7 days for the first eight steps. After I activated the campaign, I would expect all flow into the first stage of the decision and all those whose lot = 1 will immediately proceed to the stage of e-mail and the rest will wait seven days before moving on to the second decision, where everyone with batch = 2 will be moved to the stage left and e-mail everyone will wait for more than seven days, etc.
I want to just make sure that this will be similar to, say, the Email step click on decision given that the data in the custom object will not change during the evaluation period, as it can to the other stages of decisions. And I don't want to accidentally send all nine lots at a time.
Thank you.
Hi Rob,
This could work, as the Yes path would fire instantly and without the path would check during the evaluation period. Is there a reason to not only use a delay of a week between each stage of the decision well? A little more crowded, but perhaps more clearly during the audit of the canvas to the wire without having to enter each stage?
See you soon,.
Phil
-
Hi all
I noticed a strange behavior in the min & Max node in the snippet below. It is set to compare items. According to the size of array, as determined by 'Dimension' the resultant y table for the 'Signal' gives different results.
It is supposed to read:
NaN, 1, 1, 1, 2, 2, 2, NaN...
But when I get a value for the 'Dimension' of 16 or more, it reads:
NaN, NaN, NaN, NaN, NaN, 2, 2, 2...
For small values of 'Dimension', the code snippet works as expected.
With the help of probes, it seems that min (NaN; x) = x for tables with 15 elements and less and larger paintings is min (NaN; x) = NaN
Certainly it is not provided for
I guess I'm missing something obvious and I'm about to learn something.
Or is it really a bug?
With the help of LV 2011 SP1
Concerning
Florian
A solution to your problem is to put a loop around the comparison. It will give consistent results.
What I find interesting, it's the result of more than 16 items of tables is the same that if you compare the aggregates.
It also has appearss to be precise to NaN. If you use a different value for your table, you don't see the value changes.
I can also confirm the same behavior in LV2012.
-
Hello world.
I am a beginner on Labview. I would like to ask questions about my problem described below:
I do a signal waveform and I want to have another signal that has that 1 min delay time (amplitude does not change). So, I want to compare the magnitude of the two signals at the same time. In fact, I only find how to make a signal by discrete values (table), but I do not know how to find an amplitude in a defined time.
Hello
It is expected to see the difference as 0, since you compare item 'i' on channel 1 with the 'i' of the channel 2 element.
you're not comapring them according to their time instant.
Thus, instead of calculating the difference of two arrays Y like that, you should do the following:
option 1: since the dt = 1 minute, you remove the first element of the array Y channel 1 and then compare it with the table Y channel 2. (do not change the table Y channel 2). Then you would compare the elements Y which are at the same time instant.
option 2: use a loop For, with shift registers and compare the present value of the channel 2 with the value of the channel 1 of the previous iteration.
Edit: try the attached code
-
Problems in the comparison of berries
I know that it is a really simple subject and I got there about 30 minutes of work, but I then made the VI into a Subvi and implemented in another program and now it seems to be comparing everything. The basic idea for the Subvi is to compare the max temperature measurement, the voltage and the current setting in an experiment and make sure they are not too high. A simple pseudo-device code would be:
-Put in the table of temperature measurements
-Bring in the setting of the voltage
-Bring to the current setting
-Calculate the max temperature measurement
-Create the temp max, voltage and current
-Compare this to an array of comstants (my limits) in compare agregate mode
-If a value is greater, it returns true and disables the program.
It seems to work very well for temperature and voltage, but the program seems to ignore current now. Any help is very appreciated.
-Kyle
Set it to 'compare items' followed 'or elements of the array.
-
HP deskjet D1660 and deskjet D2660
Hello all, I am planning to buy a new hp printer, my selection were hp deskjet D1660 and hp deskjet D2660 because of their price and their design and their ink is affordable, can someone tell me the difference of this two printer because the printer two has almost the same features than what I read, the difference that I see is that D2660 has a low-ink indicator other than can someone tell me the difference between these two printers except on his conception of the physycal?
Thanks in advance...
I don't know if this link will work for you, but the HP store made a comparison side by side the two products.
Looks like the D2660 printer better when you compare the specs, but the D1660 has a higher rating of customers.
-
'Use Tabulator' in preferences didn't seem to work
Hello!
I use SQL Developer and I love it - excellent application :-)
One thing bothers me however: when I press the Tab key in a SQL-spreadsheet spaces are inserted even when "use tabulator" in "preferences - & gt; Data base - & gt; SQL Formatter - & gt; Alignment and Indentation"are checked.
The manual States the following:
Database: SQL Formatter
SQL Formatter component determines how the instructions in the SQL worksheet are formatted when you click the Format SQL. Options include whether to insert spaces or tab characters when you press the Tab key (and the number of characters), uppercase or lowercase for keywords and identifiers, whether to keep or eliminate the empty lines and if need be placed comparable items or the same line (if there is room) or on separate lines.
Anyone know why this does not seem to work?
Also "convert spaces to tabs" - usually associated with Ctrl-Shift-T function does not work.connected bug reproduces the current code in development.
-
Use the table of numbers as "item select to compare.
Greetings,
I'm curious to know how to use an array of numbers as value in the tab select edit ideally my "case" would execute an expression "Contains(Locals.arrayofnumbers,0)."
Basic principle:
1 Labview VI launches with ListBox containing all tests (multiple selections enabled)
OUTPUT is an array of I32.
2 I32 table is attributed to Locals.arrayofnumbers
3 Locals.arrayofnumbers is used with the element select 'compare '.
4. each CASE has the statement... "next" Contains(Locals.arrayofnumbers,#)
* each case would have 1 sequence to run *.
Currently TS throws an error prompt indicating that the Select step expected number, that is the table of numbers.
I already found a solution quick and pretty clean by instituiting just a condition prior to each sequence and captured to eliminate flow control all together. But I prefer not to use prerequisites for global flow control if possible and use controls to rate as expected.
I have used TS help, but don't quite give me what I needed. Maybe I didn't use the correct search string. The forum here, is the same. I'm sure that the answer may be there, but maybe I'm using the wrong search string.
Thanks in advance for any help.
To SUM UP: User selects (via LabVIEW listbox) 1 - n tests to be run (output table I32). I32 table is used for the selection of the case by evaluating "contains (Local.arrayofnumbers, 0).
Kind regards
chazzzmd78
Honestly, a Select System / box is the wrong choice for what you do. I'd go with the prerequisite options. It reduces the number of steps of TestStand.
In your case you just to see whether something exists or not in a table. Ideally, you will use the Select operations / box when you have 1 selected option of many. I suppose you're a loop around the case select so that you can run all the tests so that your code looks something like this:
For N (N is the number of tests they have selected)
Select Locals.ArrayOfNumbers
Briefcase (Locals.ArrayOfNumbers, 1).
Run test 1
Briefcase (Locals.ArrayOfNumbers, 2)
Run the test 2
Select close
Closing loop
If you want to use the Select option / box correctly I would like this:
Item ForEach in Locals.ArrayOfNumbers (assign the item being Locals.i)
Select Locals.i
Case 1
Run test 1
Case 2
Run the test 2
Select close
Close ForEach
I hope that makes more sense. If you have any questions let me know.
Kind regards
-
compare the documents menu item missing
I downloaded the trial version of adobe XI here: compare two PDFs, the file comparison tool | Adobe Acrobat XI
I tried to repair the installation, but still not see the view-> menu item to compare Documents
Thank you
Make sure that you use Adobe Acrobat, Adobe Reader.
-
Compare 2 channels for similar items
I have 2 strings - string A and B String
String a (1,2,3,4,5,6,7,8)
Channel B (1,2,3,4,9,10,11,12)
I need to compare the 2 strings and find the values that ARE in the TWO channels.
If the answer that I need to get is 1,2,3,4 1,2,3,4 in the TWO channels.
I can't find anything in the string functions see
Any ideas?
There are different ways to slice it. But a general approach is to make a loop on one of the lists. Then for each element, use list functions (IE, listFindNoCase, etc.) in order to determine whether it exists in the list of other institutions. If this is the case, add the value to a variable. At the end of the loop, you will have a list of items in the two lists.
That said, cflib.org is always a good place to check first.
-
Original title: photo library
My operating system is Windows Vista. I lost a lot of hard drive space. Looking through the computer, I find that I Windows Photo Gallery, but also Windows Live Photo Gallery. Should I have them both? What is the difference between the two? Which do you recommend that I keep?
Al; so, I have some downloaded items in Windows Live Photo Gallery which I don't want. Systems says I need permission to delete (in order to recover the disk space). I am the only user of this computer, but do not know how to remove them. Please notify. What I don't want are clocks, calendars, and the types of button "play" of things.
Hello
Photo Gallery Windows comes pre-installed on Windows Vista and it is not possible to uninstall Windows Photo Gallery.
Windows Live Photo Gallery is a component of Windows Live Essentials, which is a downloadable application and offers new features.
For more information about the Windows and Windows Live Photo Gallery Photo Gallery click on the link below.
Windows Photo Gallery: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions
Windows Live Photo Gallery Help Center
http://explore.live.com/Windows-Live-Photo-Gallery-Info-FAQ
For more help on Windows Live Photo Gallery, you can post the question on the link below.
Gallery Portal
-
I benefit from Adobe Premiere Pro compared to 12 items
My girlfriend wants to do some consumer level video editing on my computer, which has a processor i7 - 4770K and a GTX780 graphics card.
The question is, will be able to take advantage of the GTX780 to speed up the rendering, Adobe Premiere elements 12 etc, or will we have a pro edition to do?
On my old computer, she thought it took a lot of time to make videos (rendering I guess?), but it was with an i5-2500, then perhaps the best CPU will be sufficient to speed things up?
In addition, since it is relatively new to video editing all she does is at a level of consumption, if those applications never will use the same gpu so we have the foot to a pro edition?
I have no experience with video editing so I don't know where the gpu can be used to speed things up, so if someone could develop on this it would be greate.
Thank you!
Your graphics card has nothing to do with the rendering speed. It is entirely a function of processor.
The real question is which model of camcorder is your coming video? First 12 items work very well on formats such as miniDV, HDV and AVCHD.
You can see how easy this program is to work with checking my basic training tutorials 8 free share on Muvipix.com.
-
Using SSI compared to Dreamweaver library items.
Murray, who was told to SSI - Server Side Includes in another thread. But when I go to one of the books I have on Dreamweaver, the author says that my hosting company like SSI much because it uses more system resources. In response to this, Dreamweaver creates library items.
Is there a reason to choose one method over the other?
Murray - is there a reason didn't you recommend library Dreamweaver elements for common components across many pages?
Thank you
Tom.oO (tomwood2)
> Murray was told to SSI - Server Side Includes in another thread. But when I go
> one of the books I have on Dreamweaver, the author says that my hosting
> company like SSI much because it uses more system resources.Certainly, but completely irrelevant. A site really dynmaic with PHP and MySQL
for example, we even more resources, but after all that is a
Server is for. If the server goes down on his knees just because of a
SSI little or some scripts then you should change the host.Server processors need something to do. Static HTML pages are boring. ;-)
> In response
> that, Dreamweaver creates library items.
>
> Is there a reason to choose one method over the other?SSI and similar techniques are processed on the server, while the elements of lib
more or less a few replacements are made in DW. If you change something,
you will need to download subject pages again, while with SSI you just downloaded
a single file that has been modified and the server takes care of the rest. Of course
These side Server includes / replacements occur on every single request,
but as said - that's what a server is for. You pay for it, you can use it.Micha
-
How to compare two columns in Xl
I want to compare two columns in the file of Xl. column A contains phrases and column B contains the words
For example
Column A Column B Column C
I have an Apple and I'll eat every day Apple Apple
I have a banana and eat weekly banana papaya
Oranges are rich in nutritions cauliflowers Oranges
Papaya is good for health Grapes Papaya
Oranges
Lichi
Banana
I want to check each value of column B in each cell in column A, and if it matches then it should return the corresponding value in the result to me. Column C should Look Like as shown above.
Can someone point me in the right direction here of what formula to use for this Xl.
Thank you
This is a forum for Mac OS X technologies, so here's an Applescript solution:
- Copy-paste the script in the Script Editor
- Select the cells in columns A and B
- Command + c to copy to the Clipboard
- Click on the button "run" in the Script Editor
- Click once in the top cell in column C where you want the data
- Command + v to paste
Here are the results:
There is no verification error here. You must select and copy to the Clipboard before the race.
SG
the value LstOfLsts to makeListOfLists (the Clipboard as a 'class utf8 ')
the value theSentences to getCol1Vals (LstOfLsts)
the value collected in getCol2Vals (LstOfLsts)
game of theMatches to «»
Repeat with I in collected items
If theSentences contains I then ¬
the value of theMatches to theMatches & i & return
end Repeat
Set the Clipboard for theMatches
to getCol1Vals (LofL)
game of col1Vals to «»
Repeat with en LofL points
the value col1Vals to the col1Vals & "" & i point 1
end Repeat
end getCol1Vals
to getCol2Vals (LofL)
the value col2Vals to {}
Repeat with en LofL points
If i's point 2 is not "" then ¬
i copy point 2 to the end of col2Vals
end Repeat
return col2Vals
end getCol2Vals
at makeListOfLists (theTxt)
value was to theTxt paragraphs
the value text point of delimiters
the value theListOfLists to {}
Repeat with I from 1 to count was
the value theListOfLists to the theListOfLists & {the was point i text elements}
end Repeat
the value point text delimiters to «»
return theListOfLists
end makeListOfLists
-
compare arrays of floating point
Hi all
I have a table of 2_D as
1 0,0119
2 0.0140
3 0.0157
up to 50 items.
and the second picture is as
0.0137
0,0153
0.0156
up to 20 items.
I need to compare second table with the second column that is the first table floating-point numbers . Find 20 items in table 1 that are as close as possible (maybe not exactly equal) to the 20 items listed in table 2.
and return the corresponding values for the colors n ° 1 in table 1.
ex. - 0.0137 will be compared with the entire table 2.
He'll find 0.0140 and we get part 2.
0,0153 next will be compared and so on.
Final result will be a 1 d array with values of col 1 only.
Help, please.
It is confusing that name you the 2D file P1.txt and the 1 d P2.txt file.
It seems simpler to use "worksheet file read" to read the two files.
The mistake you make now is to create the table 1 d with the default tab as the delimiter. He reads only one, because there is no tabs in the file. All you need to is change the newline delimiter. It is what it is!
Now, it seems to work perfectly, please test.
Maybe you are looking for
-
NTFS write stopped working in Sierra
I use a Toshiba external hard drive formatted in NTFS. Since the upgrade to Sierra, I can't write to this disk. I have written before, as I used it exclusively with my Mac. I have a Macbook Pro Retina early 2013. What should I do to solve the problem
-
Question the p7 - 1207c HP Pavilion graphics card update
Hi, I currently own a HP Pavilion p7 - 1207c and I play NBA 2 K 15 on settings at 1600 x 900 in low and medium perhaps only 25 30 if I have the chance. The map I intend upgrading to is the GT 630 or 730 WG. My question is if my motherboard supports o
-
Windows 7 - error Code: code 80072EE2 (cannot install updates)
Win7/64: Will not download Windows updates. I've added MS web addresses to the Trusted Sites. I tried to connect with Firewall and Norton is disabled. No success after several attempts for several days. (The computer has downloaded the updates succes
-
Problems caused by the memory of start?
Recently, I swapped an upgrade memory of 8 GB that I did on my Aspire 5552 year last in my new Aspire V3-571 NXRYFEK016 More recently, I noticed that my laptop boot problems... it would freeze on the acer at Startup logo. I tried to disable starting
-
Help please?