compare reports and migration

migrated an application designer since the environment of TEST development and TEST environment now is watered. I would get the TEST again to be a mirror of the production environment. Compare several reports and if I read them correctly (sorry still enough new for PEOPLESOFT) the target column is red (which means that these are the only target values, which is my TEST target) the Source column is the production and this column is all green (Peoplebooks says is only the data SOURCE) so that tells me the mirror environments not mutually correct?

another would be the best way to migrate the last project in production on in the test compare report until all mirrors (which would be blue or just empty?) or to perform a full restore of the TEST environment on the eve of the day where it has been sprayed?

should also be programmers project and data migrations or ADMINISTRATOR? in my experience everyone should not have access admin outside the development environment. read only in TEST in addition to the DBA and the DBA user end migration? and is there a reason that a programmer must have Peoplesoft Data Mover, installed on the machine it has admin access to all environments? and how can ensure you the integrity of the data?

Access issues:

Developers need access on dev environments and to develop and test to migrate projects to full environments. Directors of migrate to the uat test projects and once approvals are given by end-users, they migrate to the prod of approx.

compare the reports and questions:
Once the project is developed in dev and is ready to migrate, run a report to compare source to the target (dev in tst). code changes appear in red on the side source, rest is shown in green on the side of the source. all flags will be defined by running the reports.flags compare, I want to talk to are the indicators of upgrade. same and same are the words that you see objects if they match the target source (or) you will see changed-changed if it is necessary to migrate between of the CA. If the void is the line of code that is displayed on the code page, so there's no difference in the line of code between of the CA.

migrate objects and run verification tests. Initially, until you get used to the migration, try running compare reports after migration also see reports comapre as empty and everything to say same and even on the upgrade tab.

Thank you

Tags: Oracle Applications

Similar Questions

  • Reporting and analysis 9.3.1 migration utility is not running

    Hi all.

    I have installed and configured the services on windows server 2008 32-bit 9.3.1(Shared de Hyperion, Interactive reporting, SQR Production Reporting et espace de travail). After configuration, service shared, workspace, interactive studio and studio reporting SQR reporting work properly but when I installed the Migration of Reporting and analysis utility, it shows "Application is running - please wait"...

    I want to know it's utility reporting migration and analysis (9.3.1) is compatible with windows server 2008 32-bit? or is it possible to run this utility on windows server 2008 32-bit?


    Please get back to me back as soon as possible... I am really in big trouble...




    Concerning

    Rahul

    Take a look at the site of matrices of platforms supported (http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html) for 9.3.1

    I checked the pdf document, and it does not say much about the migration utility. It's here: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here.pdf

    I'm really surprised that all other components work, given that windows server 2008 (probably because it comes from a previous version) is not in the list of supported OS.

    See you soon,.
    Mehmet

  • problem reports and solution:

    my window vista show me problem reports and solution, but it doesn't give me any solution. Tell me how can I solve this issue?

    How to fix Windows Update, Microsoft Update and Windows Server Update Services installation issues:
    http://support.Microsoft.com/kb/906602

    1. see the "need help?" Tell us what problem you are having"section of http://support.microsoft.com/ph/6527

    2. you cannot install some programs or updates
        http://support.Microsoft.com/kb/822798

    3. check your WindowsUpdate.log (% windir%\WindowsUpdate.log) to find errors associated with the download/install.

    How to read the WindowsUpdate.log file
    http://support.Microsoft.com/kb/902093

    3 b. errors compared to those listed here: http://www.bleepingcomputer.com/blogs/mowgreen/index.php?showentry=1122 or go to http://windowsupdate.microsoft.com > click on help and Support link in the left pane > solve problems on your own.

    ================

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    ================

    Launch a collateral request for assistance free Windows Update:
    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Reporting and analysis

    I used LCM to export artifacts of objects in repository for reporting and analysis. The export went well, but when I try to import, several errors were thrown. Repository for my business objects is around 12 GB and error, the log shows is "artifact cannot be migrated. I open the workspace and randomly checked some records and they have all the same files had the other workspace. Any help that anyone on that these errors can be?

    Hi Tedd,
    There is a dependence in objects - for example, if a database does not exist, a report to this database will fail to import. Look at the dependencies.
    Another tip is to start small and then with growing experience, expand. Otherwise, you risk multiple problems, which may or may not be connected.

    Kind regards
    Philip Hulsebosch

  • Hyperion Reporting and patch analysis 9.3.3

    Hello

    Someone can guide me after installation of the Reporting and Analysis Services/Reporting and analysis UI services/Reporting and analysis Client/Reporting Migration Utliity 9.3.1 and now to install 9.3.3 need to apply different patches for these different components or a patch updates all components?

    I downloaded the Patch 9900557 -Hyperion Reporting and analysis system of e - 9 release 9.3.3.0.0 stamp delivery.so if anyone knows which is the patch or do we need any patch separated for reporting and analysis, please let me know.

    Thanks in advance,
    NICI Rama

    There is a single correction utility, the utility to install SP (patch.bat)
    that will do a lot of the patch file automatically. The result of the patch is there are 3 new files of war/ear you will need to redeploy the application server in the configuration utility. This includes the workspace, financial reports and Web Analytics.

    Information is in the release of patch notes, but I think that answer your question - there is a simple script to run, and then redeploy the application servers.

    Nick

  • which computer is best for home use, including reports and spreadsheets?

    I've been using 'other' computer for many years at work and at home, had an iPhone several years ago and at the insistence of my daughter to Apple computer, I explore the possibility of buying an Apple computer. I need to type reports and do worksheets as a Secretary for an organization. I used Microsoft Office Word and Excel and need something similar, but without all the bugs and viruses. My laptop crashed a few days ago and I lost all the data and applications. Instead of the tedious task of restore all applications, this seems to be the time of the Apple store. Any suggestions? Mac, iPad, or do you use?

    caytn,

    I suggest to start by looking at your budget.  Knowing how much you can spend on a machine will considerably reduce the options.

    I expect that the options will be one of the following:

    MOBILE NO:

    Mac Mini: $500-$2200

    iMac: $1100 - $2400

    PORTABLE:

    MacBook: $1300-$1600

    MacBookPro: $1300-$2700

    I, personally, do NOT recommend an iPad for professional use

  • How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

    How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

    Watch their deposits of the company. This community is to post technical questions.

    We are users like you. We are not Apple. If you wish to contact Apple use the link contact us at the bottom of this page.

  • complete a report and start the following in a sequence

    Hello world

    because I did nothing in the model sequential and other models an options so far, I do not know how to start. Maybe you can help me with the following problem:

    I have a lot teststeps in about 50 sequences. The problem is, that my report is too long to be displayed with the internet explore (I choose the ATML format).  I spend most of the sequences manually and restart the test until I have tested everything. It's too much manual work.

    Now, I want to automatically create a new report, for example 100 teststeps, or on another event.

    A problem may be the style sheet, because the sequences are not finished when the report was created.

    Another problem is how to tell teststand that he must finish the first report and start another.

    Thanks for your response

    Meike

    Meike,

    Another option, though less frequently used, would be to Pierce your sequence of subsequences and have some (or all) of these subsequences to run in the execution of a new one with the sequential process model. This will cause several smaller reports to generate. This approach is described in point 4 of this white paper: http://www.ni.com/white-paper/14394/en/

    This approach seems like it might be what you are looking for. Let us know if you have other questions about this!

  • Why windows constantly error reports and turn off

    Why windows constantly error reports and turn off. It is THE most reliable service.

    * original title - sucks of windows *.

    Hello williamiscome,

    This error message do you receive?

    The computer shuts down or restarts it?

    Let know us and we will continue to help you.

    Best regards

    Matthew_Ha

  • IE8 and it just started with a lot of error reports and custom back to the home page

    Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

    Hello mikegrimesWQ,

    Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

    What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

    How to download updates that include drivers and hotfixes from the Windows Update Catalog

    Please let us know status.

    Thank you

    James

  • "Problem reports and Solutions" does not

    After scoring in my Windows Vista machine, I am bombarded with notifications "Problem reports and solution" does not. I tried to disable the service, but I still get notifications. I can't find PRS in the control panel. In the event viewer, I found the following:

    Error
    Log name: Application
    Source: Application error
    Event ID: 1000

    WerCon.exe application, version 6.0.6002.18005, time stamp 0x49e026db, module wercplsupport.dll, version 6.0.6000.16386, time stamp 0x4549d345, exception code 0xc000001d, offset error 0x000000000000ce84, 0xda0, failing application start 0x01cd140e4c7b7770 process id failed.

    I can't confirm or deny that usrename of the local administrator account has been changed. It is quite possible. I know that usernames on the pc have been changed to instead of creating new user accounts. I just can't confirm if one of these accounts was a local administrator.

    Any help would be greatly appreciated. It is a major pain in the back.

    SG

    Hello

    1. Your computer is connected to a domain?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you to see link below and check if it helps.

    Windows Error Reporting and reports on problems and Solutions feature in Windows Vista: http://technet.microsoft.com/en-us/library/cc709644(v=ws.10).aspx

    Hope this information is useful.

  • Do I really need to download Windows Vista SP1, if I already have SP2? Problem reports and Solutions says to download.

    I ran, "Find new solutions", in the problem reports and Solutions and a new solution was found for Blue error screen and he recommended that I have download Windows Vista SP1. I have SP2, so I need to download the old version too?

    Hi JJ,

    I took the lead and it moved to the Performance and maintenance Forum. In response to the original question don't you're useless to download SP1 again since you have installed SP2. However, it would be preferable to follow with PA support to troubleshoot the Stop Code you receive.

  • Problem reports and solutions providing incorrect information because of Adobe.

    There seems to be a problem with Adobe Reader X generating a crash and an error when it is stopped. Windows "problem reports and solutions" said Adobe updates are available, but they are not and the version of the player is the last. This question is also on the Adobe forums.

    In reality, Adobe Reader seems to work OK so why it generates this error I do not know.

    This is the Windows error reporting,

    Signature of the problem
    Problem event name: APPCRASH
    Application name: AcroRd32.exe
    Application version: 10.1.1.33
    Application timestamp: 4e64e4e2
    Fault Module name: AcroRd32.dll
    Fault Module Version: 10.1.1.33
    Timestamp of Module error: 4e64f98b
    Exception code: c0000005
    Exception offset: 000218f8
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 2057
    Additional information 1: fd00
    More information 2: ea6f5fe8924aaa756324d57f87834160
    Additional information 3: fd00
    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    See,
    http://forums.Adobe.com/message/4028803#4028803

    I run Vista and MSE only and tried Adobe Reader X on a clean install with the same error.

    Hello

    You can see this article which talks about known issues with drive X.
    http://kb2.Adobe.com/CPS/877/cpsid_87775.html

    See also:

    http://kb2.Adobe.com/CPS/860/cpsid_86063.html

    If the problem persists, contact support Adobe as mentioned above.

  • How do I remove an element in Windows Vista "Problem Reports and Solutions"?

    I have this problem here in my pc which is said in the "Problem Reports and Solutions" window, "Antimalware Service Executable" which seems to be irremovable. Even if I click on 'Clear the problem and the solution of history' it does not disappear, it just says: "cannot delete the 1 article.

    Help, please

    I checked again and what da you know... it's GONE already as he was not there. u

    Thanks for the 1 Viewer. ALT + 0252 = u

    Try the steps mentioned in the article

    http://www.calendarofupdates.com/updates/index.php?showtopic=13967

  • "Problem reports" and Solutions do not work

    Running Vista Home Premium.  Under "reports on the problems and Solutions:

    1. "check the new solutions" is gray
    2. 'see problems to check' is gray
    3. "view problem history" is gray
    4. "change" works.  The parameter is set to "look for solutions automatically (recommended)".
    5. "history of solution and problem of Cloar" is grayed out
    It is said there is no solution found - but he says also last checked on September 27, 2008 (it's now July 2009).
    I am the administrator and just to be sure I tried to "run as Administrator".  Nothing different.

    Check that the error reporting Service is running. Type services.msc in the search box on the Start Menu, open the Services Console, scroll the Windows error report and double-click it. If the service is stopped, start it and change the Startup Type to automatic. Jim - MVP Windows Live - moderator of the Forum - live a care - Live Mesh - Microsoft Security Essentials

Maybe you are looking for