Comparison of references has failed
Hello
recently, I observed a strange behavior when you try to compare two references referring to the same controls typedefed.
What I want to achieve:
I created a control typedefed (a group of radio buttons with additional information) for use on the front end of the user interface. To manipulate the content, I created a Subvi, which takes a front control reference. The feature is not interest - he controls the values represented by radio buttons, so it is a sort of "advanced radio button control.
Now, I need to address the data structure, the cluster components. The first approach was to compare the labels with a hard-coded string. But then I ignored this first attempt because if someone changes the labels of front-end control the Subvi is no longer visible reason. So I decided to compare the references.
So far the story of presentation...
Now, I have observed some kind of pathological behavior - and this is my question:
Attached to this post is a little demonstration VI which should clearly state the question.
First of all, I created an instance of the control. For simplicity let's call him "MyControl".
Then, I created two references to this object.
The first by selecting the Reference of the Server 'VI' in the 'Application' menu. Done, right click on the reference and choosing the menu option 'Link to .../Pane/MyControl' creates the link to the control. If I open the same menu entry, there is no point of control in the menu (this becomes important later).
The second, that I did a right click on MyControl and selecting the menu item "Create/Reference". As for the first difference this reference shows check marks in the entrance 'Link to... ". " of the right click menu.
Both references seem to be related correctly to control if used to read or write all properties. But if I try to compare using the "Equal?" 'Différent?' or the 'Comparison' palette, result is inequality. Unless we compare the cast type numbers or references by itself.
I know that the value of references may differ in value, but the comparison functions that must manage in resolving references before equality checking. (refer to the documentation for the range of comparison)
Why the references are uneven? Also, right-clicking on the control or its terminal and by selecting "Find all references" in the menu right click - only considers the first of these two references.
Is this a problem of referencing the typedef and contains the structure the typedef? (only typedefed controls behave as described, after that disconnection of the typedef comparison works)
One last thing, I found out: select 'Link to .../Pane/MyControl' in the menu on the right - click with the button of the second reference (the checked input) connects the reference correctly, even for the comparison functions and function "Find all references" . As a result, the checkmarks disappear.
How can I ensure a good related references? Is there a better way - more stable - to refer to a control by a label or a reference?
Is this a bug? I'm using LabView 2011 (without SP1) on a computer laptop win7.
Tags: NI Software
Similar Questions
-
When sending emails, I get follow-up messages:
The connection to the server has failed.
Object "try again"
Server: 'smtp.comcast.net '.
Windows Live Mail error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure (SSL): Yes
Socket error: 10013Comcast e-mail settings (note the reference to port 25)
-
Unable to install vista 64-bit sp2, his show Installation has failed.
his show Installation has failed.
Hi manjunathak,
· Did you do changes on the computer before the show?
· You get the error message?
Follow these methods.
Method 1: Temporarily disable the security software.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts and try to install the updates.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: Follow the steps in the Microsoft article mentioned below and check if it solves the problem:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669
For reference:
Learn how to install Windows Vista Service Pack 2 (SP2)
How to reset the Windows Update components?
-
This copy of windows has failed the windows genuine validation.
I get the following messages.
' may be victim of software counterfeiting.
This copy of windows has failed the windows genuine validation.I ran the diagnostic tool and published the result below.
Diagnostic report (1.9.0019.0):
-----------------------------------------
Given WGA-->
Validation status: invalid license
Validation code: 50Code of Validation caching: 0xc004c4a2
Windows product key: *-* - X86GK - BQ8R6-2B9W4
The Windows Product Key hash: otwCjetUnKokH4sIRWWvF1Jh0mA =
Windows product ID: 00426-067-9529674-86380
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {4FADFC09-2F9F-4762-A0F9-9A67FC2D625C} (3)
Admin: Yes
TestCab: 0x0
WGA Version: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.130104 - 1431
TTS error:
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Enterprise 2007 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{4FADFC09-2F9F-4762-A0F9-9A67FC2D625C} 1.9.0019.0 6.1.7601.2.00010100.1.0.001 x 32 *-*-*-*-2B9W4 00426-067-9529674-86380 5 S-1-5-21-4040323424-3826660273-1778398338 HP-Pavilion ,RK571AAR-ABA m7780n Phoenix Technologies, LTD. 5.08 20070330000000.000000 + 000BF603407018400FA 0409 0409 Pacific Standard Time(GMT-08:00) 0 3 HPQOEM SLIC-CPC 100 100 12 6A2E2BE3F5B56CE w6MDp4yS8TlZEZ8QEMOPF8jblKI = Microsoft Office Enterprise 2007 81599-871-1537561-653891 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00172-067-952967-00-1033-7601.0000-0742013
Installation ID: 003244687483286725250224860754582221818646363405760155
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 2B9W4
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 4
Trust time: 15/03/2013-14:00:31Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: PASS
Event timestamp: 3:15:2013 13:30
WAT Activex: registered
WAT administration service: registered--> HWID data
Current HWID of Hash: MgAAAAEABAABAAEAAAABAAAAAgABAAEAeqjOwrhH7Ngu9/omeKQkLlSZBIPgaXZYKoU =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-CPC
FACP SLIC-CPC HPQOEM
HPET SLIC-CPC HPQOEM
MCFG SLIC-CPC HPQOEM
SLIC SLIC-CPC HPQOEM
SSDT HPQOEM SLIC-CPCYes the sticker of the product keys match the diagnostic report. I've been running this product for more than two years and now all of a sudden it is not valid?
I recently had a problem with hard drive with this machine and had to reinstall the system and restore data from a backup. Is it possible that this has some how changed the PID at the origin of this problem?If I have no choice but to buy a new OS can spend to Win 8 or will I run into a question?
As I said before, "No matter how long he ran 'okay'..." »
Copies MSDN work very well - until Microsoft discovers that they have been used in a way not scheduled (they are sold by unscrupulous people who probably to sell at an attractive price in comparison to other copies - a lot of people don't care about questioning why they might be cheaper.) Others may sell at the same price and make more money before disappearing).
You have an MSDN copy. Your PID has not been changed by restoring the backup. ;-)
You can try changing your product key of Windows 7 than on the sticker:
http://pcsupport.about.com/od/osproductkeys/HT/change-Windows-7-key.htm
Then try to activate by phone:
http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html
And come back to report to what past.What operating system do you have on the laptop before? You can get a Windows 8 upgrade for that - but I would not honestly - recommend it because the difference is quite obvious and you haven't checked your software and hardware is supported on Windows 8, I know. My recommendation for Windows 8 is to use * if * the system you have came from the manufacturer with it pre-installed. :-)
-
Link again of the 'adpchnew' module has failed.
Cheap DBA
Application: 11.5.10.2
Database: 10.2.0.4
O / S: RHEL 4.0
I do the installation of discoverer. Suite using discoverer 10.1.2 with Oracle E-Business Suite 11i [313418.1 Id].
I am trying to post installation steps and apply the 6430269 hotfix, it gave the error relinking.
Please see the following error message.
From link to executable ad "adpchnew" Fri Jun 25 12:32:02 GST 2010
GCC-s-L/s02/prod/prodora/8.0.6/lib-L/s02/prod/prodora/8.0.6/lib/stubs - ldl
/S02/prod/prodappl/ad/11.5.0/bin/adpchnew o
/S02/prod/prodappl/ad/11.5.0/lib/adpmain.o.------
/S02/prod/prodappl/ad/11.5.0/lib/libad.a
/S02/prod/prodappl/FND/11.5.0/lib/libfnd.a - lsql
/S02/prod/prodora/8.0.6/lib/nautab.o /s02/prod/prodora/8.0.6/lib/naeet.o
/S02/prod/prodora/8.0.6/lib/naect.o /s02/prod/prodora/8.0.6/lib/naedhs.o ' cat
' /S02/prod/prodora/8.0.6/lib/naldflgs-lnetv2 - lnttcp - lnetwork - lncr
cvsl - of - lclient - lcommon - lgeneric - lmm-lnlsrtl3-lcore4-lnlsrtl3-lcore4
lnlsrtl3-lnetv2 - lnttcp - lnetwork - lncr - cvsl - lclient - lcommon - lgeneric
-lepc-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3-lclient - cvsl - lcommon
-lgeneric-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3 ' cat
S02/prod/prodora/8.0.6/lib/sysliblist' - ldl - lpthread - lm
/S02/prod/prodora/8.0.6/RDBMS/lib/defopt.o
/S02/prod/prodora/8.0.6/RDBMS/lib/ssbbded.o
/usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: reference to the undefined
'dl_iterate_phdr@GLIBC_2.2.4 '.
collect2: ld returned 1 exit status
make: * [s02/prod/prodappl/ad/11.5.0/bin/adpchnew] error 1
Done with link to executable ad "adpchnew" Fri Jun 25 12:32:04 GST 2010
Link again of the 'adpchnew' module has failed.
See error messages above (also recorded in the log file) possible
reasons for the failure. In addition, please check that the Unix username
running adrelink to read, write and execute permissions
on the s02/prod/prodappl/ad/11.5.0/bin directory.
and that there is enough space on the disk partition
containing your Oracle Applications installation.
Reissue of links module "adrebase" in product announcement...
==================================
From link to executable ad "adwrknew" Fri Jun 25 12:32:04 GST 2010
GCC-s-L/s02/prod/prodora/8.0.6/lib-L/s02/prod/prodora/8.0.6/lib/stubs - ldl
/S02/prod/prodappl/ad/11.5.0/bin/adwrknew o
/S02/prod/prodappl/ad/11.5.0/lib/aiworker.o.------
/S02/prod/prodappl/ad/11.5.0/lib/libad.a
/S02/prod/prodappl/FND/11.5.0/lib/libfnd.a - lsql
/S02/prod/prodora/8.0.6/lib/nautab.o /s02/prod/prodora/8.0.6/lib/naeet.o
/S02/prod/prodora/8.0.6/lib/naect.o /s02/prod/prodora/8.0.6/lib/naedhs.o ' cat
' /S02/prod/prodora/8.0.6/lib/naldflgs-lnetv2 - lnttcp - lnetwork - lncr
cvsl - of - lclient - lcommon - lgeneric - lmm-lnlsrtl3-lcore4-lnlsrtl3-lcore4
lnlsrtl3-lnetv2 - lnttcp - lnetwork - lncr - cvsl - lclient - lcommon - lgeneric
-lepc-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3-lclient - cvsl - lcommon
-lgeneric-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3 ' cat
S02/prod/prodora/8.0.6/lib/sysliblist' - ldl - lpthread - lm
/S02/prod/prodora/8.0.6/RDBMS/lib/defopt.o
/S02/prod/prodora/8.0.6/RDBMS/lib/ssbbded.o
/usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: reference to the undefined
'dl_iterate_phdr@GLIBC_2.2.4 '.
collect2: ld returned 1 exit status
make: * [s02/prod/prodappl/ad/11.5.0/bin/adwrknew] error 1
Done with link to executable ad "adwrknew" Fri Jun 25 12:32:08 GST 2010
Link again of the 'adwrknew' module has failed.
See error messages above (also recorded in the log file) possible
reasons for the failure. In addition, please check that the Unix username
running adrelink to read, write and execute permissions
on the s02/prod/prodappl/ad/11.5.0/bin directory.
and that there is enough space on the disk partition
containing your Oracle Applications installation.
Kind regards
SGCheck this thred
libgcc_s.so: refers to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined -
I'm trying to migrate all my email from Thunderbird to my Google Mail account. I have my old email into local folders, and I have my Google email account set up successfully as an IMAP account. I'm dragging E-mail folders under local folders to folders in the title of the IMAP account.
Sometimes it works fine, but most of the time, I get an error "the current command has failed. The e-mail server for account [email protected] replied: not able to analyze command. "I can often with success select and drag 30 messages, but sometimes it fails with even a single message.
Any suggestions?
Several suggestions.
1 turn off email scanning in your anti-virus product against struggle.
2. create an exception in your anti virus for Thunderbird profile folder.
These two just release the process and remove barriers to the process.
3. check the amount of data you have used for 24 hours. Google have a limit. about 200 MB I think. But I can't really remember. -
Sending the username and password has failed. Need help!
I was denied the opportunity to send messages. Received a notice: "the sending of username failed. Mail server mail.comcast.net answered the authentication has failed. What to do? I don't know what happened. I could send and receive yesterday. Please notify.
Post your troubleshooting information for your server settings can be examined.
Helps in the menu. Troubleshooting information. Clear the check box to include the account names. Then click on copy to the Clipboard. Come back here and paste in a window of response. -
This morning my password has failed, though even I nothing changed
I'm unable to access my email account. I get the following message: send password for user Purpnet has failed. Mail server pop.verizon.net responded: authentication failed
I have nothing to engage this failure. Can you help me?
Since I can't access my e-mail, please respond to [email protected]
Thank you.
We respond to the address that you specify in the forum.
Please send your account settings to correct information in the Help menu. I guess that Verizon finally extinguished some inherited settings that have not been updated, which is the usual cause anyway. Or your anti virus is having a spasm, but lets try easy things first.
-
My T-bird was working fine last night but this morning I get an error message starts "the RETR command has failed..." "whenever I try to retrieve new messages (he tells me there are 23 of them), I get this error message. I use the version above on a Windows XP machine running.
No one here has the ability to do anything to your email address. Your email provider was just having a bad day and it is corrected now.
-
Hi all
I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.
This is the code:
Tell application "Mail".
theMessages set of selection
Repeat with thisMessage in theMessages
the value of the theAttachments attached to a letter of thisMessage
Repeat with thisAttachment in theAttachments
the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment
Save thisAttachment in file theAttachmentFileName
end repeat
end repeat
tell the end
The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.
The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.
Any help would be greatly appreciated.
Kind regards
Beem
If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:
Try
game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias
on error - file does not exist
return Beep 3
end try
say application "Mail".
activate
the value theMessages to the selection
Repeat with thisMessage in theMessages
thisMessage Open
say application 'System events' to say process "Mail".
click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1
Repeat until sheet 1 window 1 is
end Repeat
key sequence "o" using { control down,shift down}
key sequence "Nutty".
click on button 'Save' of the sheet 1 of window 1
Repeat while sheet 1 window 1 is
end Repeat
key sequence 'w', using {control down} - close this message
end say
end Repeat
end say
-
the application has failed to start because its side by side configuration is incorrect
I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect
Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
You can try to use the sxstrace tool to see if you can find which files are missing or damaged. -
Qosmio X 500-10T - integrated controller has failed
: The embedded controller (EC) has failed in the specified time-out period. This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly.
Hi all
Now, I get an error very very annoying.
Qosmio X 500-10T is freezing with more frequency with the message above in Event Viewer.
I reinstalled Windows 7 to factory settings and added all fixes Windows 7 etc with no luck to solve the problem.
I also installed last BIOS update.
Any ideas what to do?
Thank you.
Hey Buddy,
I agree with the user above. If you have already reinstalled Windows 7 back to factory settings and installed the update to the newest BIOS, it seems to be a malfunction of the equipment. In this case, you need professional help from an authorized service provider:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerIf your laptop is under warranty, the repair process is free for you. :)
-
We found no boot disk or startup disk has failed?
OK, so yesterday my wireless mouse is broken, I restart my computer to get it to work again. When I did, it has not fixed my problem, so I went online to see some solutions. When I went on a secure site, I got an alert on my computer and something about 2 programs being completed. It seemed was going to turn off the computer, and in a panic, I turn it off. When I turned it back on, it went straight to the verification of the startup disk. And it gives me the message: no boot disk was detected or the startup disk has failed. I got it a couple of times before and all I ha do turn off two or three times, and he'd turn out normally. It won't work, and I tried several ways to remedy. I clicked on F2 and F8 a F11, but nothing works, and I do not have a cd with media recovery settings. Any help would be appreciated.
When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.
Turn on your computer and immediately start typing the appropriate key 'F' to run the hardware diagnostics or system on your computer. Then, run the hard drive test and report the results. If the hard drive has failed or is about to fail, you may need to replace the hard drive. If the hard drive is reported as 'OK', the boot sector, or the hard drive was damaged and the operating system must be repaired or reinstalled.
You may need to use your HP recovery disks to solve each problem above. If you create your personal series of HP, as suggested by HP recovery disks when you configure your computer... you will need to order a series.
Please send BRAVO
-
I have a terabyte external drive that I use for backup with Time Machine. When I restarted my iMac this morning there was a mistake that OSX could not write the disk. It is said that he can still read, but not write (plenty of space on the disk). I tried to run disk first aid on the disk but it completely after about a minute and said: 'first aid process has failed. If it is possible to backup the data on this volume. Click OK to continue. Details on the error message include:
Check the file catalog.
Invalid key length
G volume could not be verified completely
File system check exit code is 8
...
File system check or repair a failure.
Operation failed.
Is there anything else I can do, or the drive is now a paper weight?
It seems that the file system on the external drive is messed up.
(1) you can try a more powerful file system recovery tool.
Perhaps Disk Warrior has the best reputation for this:
http://www.Alsoft.com/DiskWarrior/
(2) you can reformat the drive with disk utility
How old is the drive? You can think to replace the hd in the case of the external drive. It is usually a fairly simple process. Remove the drive encloser to understand what type of connection of the disk is used.
-
A HARD drive has failed in a RAID1
I have an IX2 - dl and 2 X 3 to disks configured as RAID1. I received notice that one of the drives has failed. Instead of replace the failed drive, I want to 2 X 4 to also be configured as RAID1. I know how to install the disks and all that. I was wondering if I could still read that the content of the working group still 3 TB drive in a PC?
Hello tangwong,
Here are a few links to knowledge base articles that should help you:
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/32099/kW/upgrade
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/30797
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/30456It is not really possible for the average user to mount these disks on a PC and read because there is a firmware on the disk partition and file system is based on Linux.
Maybe you are looking for
-
Short load cycles affect the battery life?
Hello world 2 weeks ago, I bought a car with Apple Carplay. Before, I was charging my iPhone 6 more at night, have it completely recharged when I wake. Then, since I plug it to my car to use Carplay everytime I go somewhere, the battery has multiple
-
I tried to upgrade vista ultimate to 7 ultimate and never managed to do work he kept crashing until I installed it (I tried about 6 or 7 times). I then went back to vista and had to reload from a return upwards I had done. now, I can't connect to my
-
enabling fi /wi all-in-one HP psc 1350
I have a printer all-in-one hp psc 1350. My office is a dinosaur and will not deal with broadband internet. Now, I use an Apple iPad WiFi Tablet and do not want to buy another printer. Is there a way to make my printer work on a wi - fi with my Table
-
Dial the direct IP address of E20 E20 /-to-peer
Hello We try to replace Polycoms by E20 in our small office. We always try to get the E20 to accept the static Ip address. He will gladly accept a DHCP offering if the product is connected to a local VIRTUAL network with a DHCP server. If specify
-
No schema definition for 'HTNG_ReadRQ' (namespace ") in parent ' / '.
I have successfully registered all the schema that are included in HTNG_ReadRQ. I tested the pattern recorded by validating against a xml code generated by a query PLSQL. I went to test the HTNG_ReadRQ and received the above error (no schema definiti