Comparison of schema to the project

Similar Questions

• VI to determine the name of the project

  For a real-time application, I wanted to determine, at runtime, the name of the project in which the VI has been "content".  I wanted to get the name of the project (even) under four different conditions:

  • on the host, in development mode
  • on the host, in Run-Time mode (i.e. after being built as an executable)
  • on the goal of RT, development mode
  • on the aim of RT, in run mode.

  It is not so easy.  I figured out how to make the first two (use the name property of the active project development and use the next last folder directory of the Application in Run-Time mode mode), but I'm having trouble to get this information to get the target RT code.  Has anyone tried this before?  Did you?  Advice (or even downright Solutions)?

  Bob Schor

  Well, I figured out, but it's not pretty.  In the previous post, I explained why I wanted to do - here I will explain how I did this.

  There are three main modes, under which Applications can run: development mode (when you are programming in LabVIEW and press the button "Run"), Run Time System (an executable on a PC) and Embedded (code that runs on a target in real time, in the form of executable file or development).  Of these, only one mode of development gives you access live (via the Application, the active project property) in the name of the project file.  My goal is to have the user interface and the RT 'chunks' of the project in real time have access on behalf of the project, the system I'll create will use same code on two subsystems, meaning that it will run on the PC at least once in the mode of development .

  The key step is to create a 'constant VI', I'll call CONST name of the project, which consists of a single indicator of string, name of the project, which "held" the name of the project.  I initially thought to use a Global Variable, but there is a technical problem with that I will mention later.  I didn't use CONST name of the project directly, but, instead, use a 'Get the project name' VI that has, for its single release, the name of the project.

  This VI, when it runs, determines the type of request under which it is running.  If it is something other than the Mode of development, he calls CONST project name and returns its value.  If this is the Mode of development, it gets the name of the project, he returned, but just before leaving, he arranges to be updated programmatically CONST project name when it is called in the future, it will return the name of the project (update).  [Then why not simply initialize CONST project name?  I'm looking for a "generic" solution that will always return the correct value, even if I move to another project and don't remember about the change and change - all I have to do to make it work is to run once in the mode of development.  Who has ever developing code without testing before making the executable?].

  I wrote a VI gave the name of project Save, which does the following: he calls set the timer on CONST project name to define the name of the new project (this works even if we put an indicator), calls to use current default to make the new value "stick" and called "Instrument to save" to save the changes.  The problem is that CONST project name cannot be "running" in the State to use current default work without raising an error.  If the name of the Save project is simply called as a Subvi to get a project name, it will be in the State of operation as it is used in the case of non-development mode to get a project name.  The solution to this witch hunt is to use the asynchronous call with-and-Forget 'spawn' name of the Save project.  Finally, we modify register project name so that it starts with a loop "wait", examinging the State of execution of CONST name project and waiting for it to exit the executing State, indicating that it is prudent to make the change.

  Phew!  But it works!  Oddly enough, when I tried this using a Global Variable instead of my Constant VI, I kept getting errors during execution are currently lacking, but despite the mistakes, the code seemed to run correctly.  I found an article (written for LabVIEW 5!) explaining that it was expected as Globals behavior were always in the State of operation.  Actually, I just realized that I had not tried with the call-and-Forget asynchronous schema, then perhaps a decade later, LabVIEW will allow me to do this using a Global without raising an error...

  BS

• Cannot open the schema of the source on the Transformation of the opening

  I get an error when I opened a transformation in my composite SOA in JDeveloper 12.1.3.0.0.

  The error indicates "can't open the source schema:" "WSDLException: faultCode = access to this wsdl file oramds:/apps/company/ABCS/wsdl/CRUD_Item_ABCS_prov.wsdl problem: CachedWSDLReader readWSDL WIthExtensionRegistry returned NULL definition in the WSDL analysis"»»

  
  

  I tried to restart JDeveloper and remove the directory with the same result .data.

  
  

  Thank you

  
  

  Tom
  

  Hi Tom,

  Check if the WSDL file is appropriately in the right schema locations and targetNamespace is correct.

  Suggest that you copy the WSDL file in the project folder and check to see if the problem still persists. It could be a problem with namespaces. It will be useful.

• Command line to deploy the project database in offline mode

  Y at - it a there command-line tool that will allow me to deploy database objects that I defined in a project database offline in a target database?

  I want to integrate continues an Oracle DB so I will need to:

  • Compare a target DB with DB objects defined in a project database offline
  • Generate a DIFF of this comparison script
  • Run the DIFF script on the target DB

  My goal is to automate these steps through some sort of command line tool.

  No data is involved. Just DB objects like tables (structure only), types, procedures, etc.

  On the past (2011) they said it was not possible (https://community.oracle.com/message/9840162)

  If this is not possible, is there another continuously integrate Oracle DB of a predefined template? Something like DACPAC for MSSQL, but for Oracle DB?

  Thank you

  Rodrigo

  Sorry, maker of data does not provide a command line interface at this point

• Preset and actual resolution to the export of the project

  I'm PE11 video edition.

  Source of GoPro's 1080@60. He has not preset in PE for this resolution and framerate so I chose a preset with AVCHD squarepixel 720p@60 by mistake. Couple days of editing before I realized that it, and from what I see, I can not change the resolution of project now...

  So the question is:

  If the original file is 1080 p, the project preset is 720 p and I export it with setting 1080 p - did I lose this quality/resolution? I mean, DON'T downsample my 720 p video and then change again to 1080 p? Who would lose quality result. Like trying to save 480 p 720 p etc. ?

  Or maybe, it's just internal preset for the purporse only edition and in the end, I get my files original 1080 p?

  IF IT ISN'T... Can I somehow copy my work on the new project defined as fullhd?

  faziasty

  Thanks for the reply.

  Let me clarify the 3rd of the 3 for what I believe to be your choice for this project under the above circumstances.

  Major circumstances... that's what you now... you set a project 720 p 60 preset for your project 1080 p 60, made your changes, cannot go back to set the parameters of the correct project (1080 p 60) unless you open a new project and start from the beginning. If you have more files 1080 p 60 to add to this project, fine. If this is not the case, head for the export of this timeline to 1080 p 60 content using the workflow details I already posted. I mean that the result will not be as bad as you seem to be projecting. This seems to be the only choice in the circumstances to save this project.

  Thanks for the details on your question on why export same size of file for your 720 p and 1080 p.

  According to the description of how you made the comparison, the same or comparable file size would be expected for these exports.

  Consider that each will have the same bitrate (32 Mbit/s) and duration of 9 seconds.

  32 MB/s (megabits per second) x 9 seconds = 288 megabits

  If we convert these 288 megabits in KB (kilobytes per second), we get 36000 KB (kilobytes) like the estimated file size.

  Compare my calculations with what you have observed in fact

  720 p file, 35649 KB

  1080 p file, 35659 KB

  Please consider.

  Looking forward to your results according to your schedule.

  RTA

• Navigation problem: published the project navigation fails.

  Hi, I have a problem of navigation: a published project navigation fails after a certain landslide. Slide all have the same setting. What can be the reason? Thank you

  Hi Erik,

  Thank you for all the suggestions. With their help, I could finally identify the problem is with the slide itself and not with Captivate settings. The in-depth slide comparison revealed that one of the links incorporated into the problematic slide caused the stop in the navigation. After the removal of this hyperlink navigation has worked fine. But I can't determine why the hyperlink has been corrupted, the project can be launched very well.

  I thank very you much for all the help!

• Binding XML schema to the repetitive elements - what am I doing wrong?

  I managed to successfully link a schema to a form of basic and apart from a few problems of active player, it works as expected.

  My next project is to do the same thing but with a form that contains repeating subforms.

  I wrote my diagram and validated and everything seems fine.  When I connect it to shape if it makes certain fields behave in strange ways.

  The form consists of three sections.  The first is a unique subform to repeat fields.  Two of the pieces is a table with the repetition of lines, and the third part is a collection of fields with the Add/Remove button using the instance manager script.

  When I bind these fields and add lines, I get strange results.  In the second part by pressing the Add button copies the entire line rather than create a new one.  Changing the value of a line of others change.

  In the third part, I can create entirely new subforms by using the Add button, but the this.parent.index + 1; script stops working.

  Anyone know why this is happening and how can I solve it?

  The pattern is below:

  < xsd: element name = "RemoteWorking" >
  < xsd: complexType >
  < xsd: SEQUENCE >
  < xsd: element name = "PartZero" >
  < xsd: complexType >
  < xsd: SEQUENCE >
  < xsd: element name = "RequireAddHardWare" / >
  < xsd: element name = "RequireRemoteWork" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < / xsd: element >
  
  < xsd: element name = "PartOne" >
  < xsd: complexType >
  < xsd: SEQUENCE >
  < xsd: element name = "Name" / >
  < xsd: element name = "FirstName" / >
  < xsd: element name = "User name" / >
  < xsd: element name = "JobTitle" / >
  < xsd: element name = "Role" / >
  < xsd: element name = "LineManager" / >
  < xsd: element name = "Direction" / >
  < xsd: element name = "PersonnelCategory" / >
  < xsd: element name = "CONumber" / >
  < xsd: element name = "TelephoneNumber" / >
  < xsd: element name = "BuildingCode" / >
  < xsd: element name = "NuméroBureau" / >
  < xsd: element name = "WorkingHours" / >
  < xsd: element name = "AltContact" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < / xsd: element >
  
  < xsd: element name = "PartTwo" maxOccurs = "unbounded" >
  < xsd: complexType >
  < xsd: SEQUENCE >
  < xsd: element name = "AdditionalHardware" maxOccurs = "unbounded" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < / xsd: element >

  < xsd: element name = "PartThree" maxOccurs = "unbounded" >
  < xsd: complexType >
  < xsd: SEQUENCE >
  < xsd: element name = "ARTICLEREQUIS" / >
  < xsd: element name = "Program" / >
  < xsd: element name = "CostCentre" / >
  < xsd: element name = "BusinessCase" / >
  < xsd: element name = "Device" / >
  < / xsd: SEQUENCE >
  < xsd: attribute name = "ItemNo" type = "xsd: Integer" use = "required" / >
  < / xsd: complexType >
  < / xsd: element >
  
  < xsd: element name = "PartFour" >
  < xsd: complexType >
  < xsd: SEQUENCE >
  < xsd: element name = "Unit" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < / xsd: element >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < / xsd: element >
  < / xsd: Schema >

  The binding expressions must indicate that you have more than one section of PartTwo. To do this you need to add a [*] binding expressions that use the PartTwo node. If you want to keep just bind the subform that contains the information of PartTwo th to the PartTwo node, and then add the [*] at the end of the expression. Then al children of this node will get expressions such as $. Name of the node to which it refers.

  Hope that helps

  Paul

• Bounce output file names do not correspond to the name of the project

  It must be a common scenario. I started a project called "forgotten Garden" and saved the project. Later, I decided that I wanted my song to be called "Voice of the forest" instead. So I renamed my project (File-> management-> rename). When I made a rebound, I expected the files .wav and .mp3 of exit named "Voice of the forest", but instead, they retain the old project name lost Garden.wav and Garden.mp3 lost. Is this a bug? I use Logic Pro X 10.2.4.

  Yes, I have seen this also.  File a bug report.

  http://www.Apple.com/feedback/Logic-Pro.html

• Cannot open the project on final cut pro :(

  Hey guys, I have a big problem.
  I edited a video which is about 1h30m and using the function "Multicam clip", and successfully made and made a DVD. but unfortunately I need the second edition. Then I opened the library file, click the project, Final Cut Pro X continuous loading and close unexpectedly, and another project to another event works normally. anyone with the same problem? I need to send it to my tmr customer

  p.s. I deleted the file, preferably according to most of the Q & A.

  What version of FCP are you running? If it's the 10.1 or later, projects are in the events that are contained in libraries.

  If 10.1 or later, is the DVD project that does not open in the same library as the project is open? Or they in different libraries

  Russ

• Slideshow: Can I cut songs to start at some places in the project?

  I create a photo slide show project. First of all, I tried it is iMovie, but with a large learning curve and the time constraints, I use photos instead.

  I have some pictures of hundreds and 3-4 songs.  I would like to choose the exact point in the project that each song comes on, instead of having the four songs evenly divided by the length of the film. Cannot know if this is possible.

  Thank you.

  No, it is not possible in Photos. There is a solution that you could use.

  1. Select all the photos you want to play with the song #1 and create a separate slide show.

  2 - export the slide show as a Quicktime file.

  3 - do the same with photos of song #2, #3 and #4.

  4 import a #1 to 4 Photos slideshow.

  5 - create a slideshow with these 4 quicktime movie files.

  Not elegant or fast, but doable.

  

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• Changing the file names of the photos used in the projects final cut express

  HI, I have a lot of pictures that I've used in some express HD projects final cuts.

  File names are not descriptive file name convention, but just standard camera. I want to add descriptive names, which will come out in the finder, but I don't want to damage the projects that I have created. I guess I could change one by one and tell the system where each file. But is there a better way? Thank you!!

  If you change the names in the Finder, all clips in your projects will lose the path of the file and you will have to redo the link.

  Changing names within the CTF will work OK but will not appear in the Finder, probably it will not work for you.

  I suggest you set the browser to display a miniature clip of the photo, that is maybe a solution to easily identify clips.

  Al

• Why the sound is different when the project is exported?

  Hi all. It's me again. Because you are always so useful, I need your help with another problem. I just finished a wedding, publishing and towards the end of the ceremony, the sound is fine when you work in Final Cut, but when I export, the game becomes heavy and distorted. Any suggestions on why this is happening and what to do? I've never had this happen before. It is a client, and to do here tomorrow afternoon at the latest. Thanks for your help!

  We have seen that this several times here on the forum but it's never happened to me. I believe that the proposed solution was to remove the shape clip your scenario and replace it form the browser; Make sure that the audio in the browser reference file is good before do you. You can export a range of test history.

  You can also try to delete the files of the project.

  It may take a few hours more for fans to offer other suggestions.

• iMovie 10.1.2 today (June 4, 2016), all of a sudden will not let me create a new project/film.  1. I have used the program extensively in recent weeks, many small travel films. 2. once in the projects, if create a new movie and the sign is checked, the op

  1. I have used the program extensively in recent weeks, many small travel films.

  2. when in the projects, if you click on create a new movie and sign, the new movie and trailer options opens successfully.

  3. click on film, nothing goes very well but open trailer.

  4. the issue seems to be the only new film/project.

  5. I can access all my other movies and run successful projects and theatre.

  6. I tried through a previous project and clicking new project from the menu, but still nothing.

  7 mac is 27 "OS X El Capitan, Version free 10.11.5, with 327 GB to 999 GB

  iMovie is 10.1.2

  8. the computer itself did not fall down and as FAS as I know, all other programs work correctly.

  9. I rebooted several times, but that has not solved the problem.

  10A does anyone else have this problem? If so, how do fix you it?

  Thanks much for any help!

  Have you ever tried to delete the iMovie preferences?  If the elements of the user interface do not, deleting preferences frequently you contribute.

  To delete the iMovie preferences leaving iMovie, runs, and then press and hold options and command key at the same time, at the launch of iMovie. Keep now pressed the buttons firmly until you see a command prompt to remove the preference. Confirm.

  

  Before you do, take note of all the settings that you made in iMovie preferences panel, so you can put back them later. iMovie will then begin with the Welcome screen.

  When I had a similar problem, the only thing that helped was to create an iMovie library.  Probably a corrupted in the iMovie project current library prevented the creation.   The problem persists, if you test different library in iMovie? You can create a library for testing.

  http://help.Apple.com/iMovie/Mac/10.1/#/mov3fa25bae7

• How I can do it then when I delete a project, it will remove videos associated with the project.

  Hello

  I recenty used my 1 TB of storage on my Macbook Pro, and I was looking for in what has been the cause of this. I realized that about 700 GB because of videos on final cut. Knowing this, I saved all my videos and decided to remove the oldest, but keep the new. I checked my storage, and nothing has changed. I realized, the application was not delete videos, but rather delete just how clips have been published. He always kept the full video. So what I request is, is anyway that I can make sure when I delete a project, it will remove all the (video) content, associated with this project? Also, is there anyway that I could delete the video projects I already deleted?

  MAC NEWS...

  OSX El Capitan

  10.11.5 version

  MacBook Pro (retina, 15 inch, mid-2015)

  2.8 GHz Intel Core i7 proccessor

  16 GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Graphics AMD Radeon R9 M370X 2048 MB

  Storage 1 TB of storage Flash

  FCP INFO...

  Version 10.2.3

  All depends on how you store your media, be it inside the library or outside the library. If internal sound then the best way to proceed is to organize your material in events as well as your project. When you delete events associated with the project, media in events are deleted as well.