Comparison table

Hi all

I have 2 tables... I just need to check if the two are same... If even give me a real and not a fake...

by using the function "=", I get a table of true/false... what I need is simple just one true if they are equal and not a fake

any suggestions

concerning

Right-click on equal to, go to the comparison Mode, then select compare aggregates.

Tags: NI Software

Similar Questions

  • Comparison table of the firewall

    Guys,

    Someone at - it a table that compares the PIX with other (say that Nokia IP series and NetScreen) firewall providers? Based on a PIX525 or another model would be good. Not too interested in flow figures but rather the Stateful and Application level Inspection engines. It would probably take me ages to create one and I guess it's probably available somewhere out there trying to close a final agreement on the sale of some PIX and securing some time too. Thank you guys

    There are several firewall, but a pretty good comparison Table which is not biased is:

    http://www.telezoo.com/ASP/comparisonsarchive.asp

    If this answers your question please rate and close. Thank you.

  • Selection/comparison table

    Just need a bit of advice for all of you who are likely to help him.

    Here's the scenario:

    I have two tables both have a date column and a few other columns. I would like to compare the date two columns between the two tables, and if the game dates, I would show show all columns in the game of my results, but if they do not match, I just want to see the date.

    So what I've thought about doing is an if/then/else statement so that I can make the comparison, and then you choose if they match and other select if they do not match, but I'm not a guy SQL; I wonder if there could be a better way to do it? Advice or direction is appreciated.

    Thank you
    Luke

    Hi, Luke,.

    The most effective way to do it (or perhaps less inefficient way) is probably an outer join complete, like this:

    SELECT       NVL (a.dt, b.dt)          AS dt
,       CASE
          WHEN  a.dt = b.dt
            THEN  a.x
       END     AS a_x
,       CASE
          WHEN  a.dt = b.dt
            THEN  b.x
       END     AS b_x
FROM            a
FULL OUTER JOIN     b     ON     a.dt     = b.dt
ORDER BY  NVL (a.dt, b.dt)
;

    The coding is a bit tedious, because you need a CASE expression for each column except dt. I only showed such a column, x (from each table), above, but you can have as many as you want.

    Published by: Frank Kulash, February 8, 2010 14:27
    How is it that, often, clicking on 'Save the Message' gives you a better idea?

    You can cut down on verbiage much by using NVL2 instead of the CASE:

    SELECT       NVL (a.dt, b.dt)          AS dt
,       NVL2 (b.dt, a.x, NULL)     AS a_x
,       NVL2 (a.dt, b.x, NULL)     AS b_x
FROM            a
FULL OUTER JOIN     b     ON     a.dt     = b.dt
ORDER BY  NVL (a.dt, b.dt)
;

    Note that, to decide if we need to display a value in a table, we check to see if the dt in the other column was present.

  • Data of the order with lines comparison table

    Hello

    My question is...

    I have a table with 5 columns, it is actually loaded from a file, and there is no direct PK, but for this combination of columns as used to make them unique

    code, person, case

    Table X

    --------------

    CODE CASE OLD_ID New_id PERSON AUTH                                                           

    01 ab122 1234 0001 AU123 99393

    07 vv353 7872 0919 FV982 78282

    01 ab122 1982 9929 99393 AU123

    04 hjsss 8839 8302 JK920 32320

    01 ab122 0001 1982 AU123 99393

    05 cg899 6728 32322 IKL020 65252

    07 w353 0919 8282 FV982 78282

    now I need to order these data comparing the values of the line to old_id new_id for each combination of code, person, case

    need output like below

    Table X

    --------------

    CODE CASE OLD_ID New_id PERSON AUTH                                                           

    01 ab122 1234 0001 AU123 99393

    01 ab122 0001 1982 AU123 99393

    01 ab122 1982 9929 99393 AU123

    04 hjsss 8839 8302 JK920 32320

    05 cg899 6728 32322 IKL020 65252

    07 vv353 7872 0919 FV982 78282

    07 w353 0919 8282 FV982 78282

    hot to get this result, any help is much appreciated...

    Thank you

    AK.

    Hello

    Do you mean that lines with the same combination of (person of code, 'CASE') will form a linked list, new_id of a line is the old_id of the next line, and you want that they sorted in order, from the old_id that isn't also a new_id?

    If so, DO NOT use an ORDER BY clause.  Instead, use START WITH and CONNECT BY:

    SELECT *.

    FROM table_x

    START WITH (NOT IN) old_id

    SELECT new_id

    FROM table_x

    )

    CONNECT BY old_id new_id PRIOR =

    AND code = code PRIOR

    AND 'CASE' = 'BOX' PRIOR

    PER person = person PREREQUISITE

  • Firefox (windows XPsp3 39.0.3) does not load a product comparison, IE will!

    I tried one compare products on the website batterychargers.com and load Web site pages, I've tried except when I selected items and you click on compare, I got the title of the page, but with an empty window to compare. I copied the URL in IE8 and loaded the page to comparison very well. Here's the url:

    http://batterychargers.com//compare/1288/1290/1291/1326

    Clear cookies and cache did not help.

    When I loaded this page, all content under the word 'RETURN' was pressed to the right, and I have to use the horizontal scroll bar to see. Or zoom out (Ctrl-) several times to reduce it.

    The reason for this problem, because as far as I can tell, is that the BACK bar is launched, and while other browsers do not see a way to squeeze the comparative table in the end of this bar, Firefox works. There are different ways to solve this problem in Firefox for the author of the page, but they are not practical for visitors to the site. So for now, using the horizontal scroll bar is the best workaround.

    But if you're curious...

    For example, the site may add this to its style rules:

    .ComparisonTable {
    clear: left;
}

    If you want to inject that into the page to test, you could do this:

    Select and copy the following script:

    document.querySelector(".ComparisonTable").style.clear="left";

    Open the web console under the page by pressing Ctrl + Shift + k or by using the menu Developer.

    Paste the script into the bottom beside the circumflex accent (> >) and press ENTER to run it. The comparison table should immediately engage.

    You can then close the web console by pressing Ctrl + Shift + i or by clicking the small x in the upper right of the console toolbar.

    Unfortunately, this is a one-off hack and you should do whenever you view a comparison, so I hope that the site will fix it. You could try to mention it to them; You can link to this discussion.

  • Replace the subset of table does not not for me

    I have a loop IN which I want to use a 1-d output Boolean of the comparison table.  There is a one-to-one correspondence between the index of the loop AND array index, so the number of loops and the size of the table are the same.  I first tried using the function insert in the table, which worked well, except that the table kept gaining in size.  Once I understood that, I replaced it by the function replace table subset, which seemed more appropriate.  However, this does not work: nothing ever appears in the table.  I tried using numbers instead of Boolean values, as an experiment, but that no longer works.  I am at a loss as to what I'm doing wrong or not understand and would appreciate suggestions.  I have attached a picture of the relevant part of the VI.

    Thank you

    Scott

    Note to admin - attachment deleted by user request - 14/04/16

    The shift to your table register is so empty and unitialized.  You can't replace an elmenent that does not exist so that the table remains empty.  You must initialize an array before the loop with the appropriate size and he lead the shift register.

  • Find the Max and Min for a table of number...

    My table has 5 numbers in it and also the ability to add more to what the user sees fit. I want to be able to view the maximum and minimum of the table number. I made a loop, but I do not know how do select the highest or lowest number automatically without me selecting manually typing in the middle.

    This is my code to determine this:

    Determine the Min and Max brand
    function maxandminMark() {}
    var markIndex:int;
    markIndex = (marks.indexOf (marks));
    If (markIndex! = - 1).
    {
    for (var i = markIndex; i < marks.length; i ++)
    {
    brands [i] = marks [i + 1];
    }
    trace (maxandminMark);
    }
    }
    }

    Here are two ways...

    1) walk through the comparison table of values

    var numArray:Array = new Array (38,11,45,7,14,9,67,28);
    var minNum:Number;
    var maxNum:Number;
     
    If (numArray.length > 0) {}
    minNum = maxNum = numArray [0];
    }
     
    for (var i: uint = 1; i< numarray.length;="">
    If (numArray [i]<>
    minNum = numArray [i];
    } ElseIf (numArray [i] > maxNum) {}
    maxNum = numArray [i];
    }
    }
     
    trace (minNum, maxNum);

    (2) sort the array numerically and pull out the first and last items

    numArray.sort (Array.NUMERIC);

    trace(numArray[0],numArray[numArray.Length-1]);

  • Can someone help me open a trustworthy VPN provider?

    I live in Germany and as a beginner, I need to find a trustworthy VPN provider. Can someone give me some advice?

    Hello, Buddy

    Your best bet is to look for customers who are not self-promotion of providers or paid ads.

    It greatly depends on what you want in a VPN, there are always compromises.

    I used a VPN from the beginning of the 2000s.  I'll try to find some links to test for you.

    Edit

    (1) this site is comprehensive and supposedly neutral

    https://thatoneprivacysite.NET/

    The creator has some good advice for choosing a VPN

    https://thatoneprivacysite.NET/choosing-the-best-VPN-for-you/

    Note the caveat, here:

    You have begun your search for a VPN by searching for "VPN Clients" in your search engine of choice. If you had, you would have rated page at a time, to what appear to be harmless review sites, top 10 or blog style customers different VPN services. You can even come here for confirmation of what have said you on these sites. The sites of these recommendations are, in almost all cases, paid for by services that they review and recommend. They start their business relationship with you, with what is essentially a lie. The technical term for this kind of marketing is "native of advertising" and it is the abuse is a huge problem in the VPN industry. I deliberately made a point to capture such data on my comparison table of the VPN. You will find information on services that have affiliate programs, the specific policies they have for them and whether or not the affiliates act ethically, essentially it services to tolerate those who represent them, when it comes to persuade to buy in the information they put out.

    A note because you are using a Mac, Buddy:

    I'd be careful about the use of sites that download software VPN on your Mac without verification and double feedback from users of these programs over the years.  Although I used a VPN for more than 15 years I'm still looking for something else.  And I have been experimenting with other VPN providers and downloaded apps that not only did not work as promised but was very difficult to remove from my system. So be judicious in your research.

  • I used to get a 'closed tab' button when I customized the toolbar, not there now, how do I get it?

    due to a problem, I needed to re - install FireFox
    When I tried to customize the toolbar there are far fewer available buttons and the 'Open closed tab' button is not there
    my other computer has

    Check your extensions list to see what is disabled.

    I do not see why you do not want to install an extension to do or unnecessarily wasting space on the toolbar when you can use 'Ctrl + Shift + T'.

    One of the following extensions may need to be updated, if this is one of those it has probably "Tab" in its name. Disabled extensions appear at the end of the of the
    list extensions ("" subject: addons ' ").

  • Y at - it a shortcut to the address bar?

    Not like
    CTRL + K for the search bar then SHIFT + Tab.
    or
    F6 then tab (and in some cases another tab)

    If there are shortcuts in the address bar, then why isn't it listed here:
    https://support.Mozilla.com/en-us/KB/keyboard%20shortcuts?as=AAQ

    If there is no shortcut, nobody knows the reason why? For me it would be by far the most used shortcut.

    Y at - it a shortcut to the address bar?

    'Ctrl + L' to the address bar.

    Find more keyboard shortcuts

  • not visible due to the window size?

    This morning I had 2 Firefox Windows, 12 people or more, which did not appear to "restore" when I clicked on the taskbar at the bottom of Windows 7.

    I lost a bunch of times, but it turns out that these 2 windows were somehow resized or moved while only using F11 (fullscreen) could I have 'find '. Where were they?

    Also, I couldn't find a way to resize the windows. It was either minimize or full screen. Clicking on the button 'Restore' rendered essentially disappear.

    Note that this happened after I was surfing on some Chinese web sites and McAfee warned on blocking a connection 'at risk '.

    I guess that you had set up two monitors to one or missed the thin sliver of the edge of the window. Since you are on Windows 7, you use the Windows key + left arrow and easily resize there. It works great on two monitors, you may need to press the hotkey up to six times to get the window where you wish as it does the same thing on both monitors. / Normal/right side to the left side. The Windows key + right click goes the other way.

    See also the oversized items

    I saw your problem for three weeks appear just after an update request, tried the old version of the application, resettled and the solution is as simple as using the new shortcut to Win7. You could get the window in position with Alt + space, then "M" to spend with older versions of Windows.

  • "back" button does not return me to the area I have left in the search list

    I use version 7.0.1 of Firefox on a laptop with XP SP3. All known updates have been applied.

    I use google to search for a topic and a list of results from site. After selecting one of the conclusions, I click on the back button, I went back to the list, but my 'space' in the list does not exist and I have to look through the list to see where I was while I can click on the following entry to find.

    I don't think that something has changed in this regard in a long time for the research.

    What I would say is that you're doing the research itself open in a new tab, and each of the search results open in new tabs in this way you know when you are finished using a tab, and you will not lose your place in the search results.

    Use the keyboard shortcut to open the results of a search in a new tab in the background, so that you can keep looking at Google results before looking at the tabs you open from the research.

    Google options (gear) at the top right, and then down 'search settings ':

    [x] search results open in a new browser window.

    Firefox tools > Options > tabs

    [x] open new windows in a new tab instead.

    Then, in Subject: config (typed in the address bar)

    Browser.Search.openintab user set to true

    Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

    More information about the configuration variables available in
    topic: config entries and for users who do not know the process, there is Subject: config (how to change).

    From a Google search, you should have the pages open in a different tab, but with Google that is not good enough, because they have open all in the same tab, as you have noticed if you have done this.

    You can use Ctrl + click or Ctrl + Shift + click to open a link in a new tab.

    You can use app-tab to pin the tab, click the tab and choose pin - tab and conversely to unpin tab or remove the tab when finished.

    You will find interesting reading of the tabs in


    http://userstyles.org/styles/18553
  • Minimum size of tab bar - themes and skins for browser - userstyles.org
    http://userstyles.org/styles/9043

  • Can I copy my bookmarks from Safari to Firefox if they are on the same computer?

    I would like to use Firefox and I want to copy the Favorites I have in Safari. I have a Mac with OS10.6 and the Safari and Firefox are on the same computer. I want to know if Firefox is friendlier, since I do a lot of writing.

    You need to update Firefox 6.0.1 via help > topic > check updates
    before trial rather than being disappointed with an updated Firefox after the test.

    All browsers can use the Netscape bookmarks to HTML file to copy the Favorites. But according to the documentation, you can import directly from Safari. I hope that this applies to your Mac, because it does not appear as an option for me on Windows 7.

    Import bookmarks - MozillaZine Knowledge Base

    "Firefox is important Safari settings automatically. Just go to file > import... and select Safari. In the next window, check the boxes that you want to import. For example, bookmark Safari will appear in the bookmarks menu to Firefox as "Safari". Whatever other bookmarks you had on your Safari bookmarks bar will automatically appear on your Firefox bookmarks bar, too. "

    If this does not work:

    Export bookmarks in Safari: (from Safari Help)
    1. Choose file > export bookmarks.
    2. Specify a location for the exported file. The file name will be "Safari bookmarks.html." Most browsers are able to import this type of file.

    Import of bookmarks in Firefox:

    1. "Command-SHIFT-B' to display the list of bookmarks library, can be done in the bookmarks menu >"show all bookmarks ".
    2. "Import and backup" menu > import HTML > HTML file
      (unless you see Safari)

    Firefox uses the same keyboard shortcut to display such menus used on Safari (on a PC, it's the 'Alt' key).

    Firefox is highly customizable so you can change the appearance, and a lot of what we would do in other browsers must be done using extensions in Firefox, but the extensions for the 'same' function probably give you much more functionality and control. The look of Firefox by following more like 3.6 would be interesting if you're used to other older browsers - Safari grew up independently for other browsers are more similar.

    You can make Firefox 6.0.1 look to Firefox 3.6. *, see numbered items 1-10 of the next topic difficulty Firefox 4.0 UI toolbar, problems (make Firefox 4.0 to 8.0, resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

    It is much more beyond these first 10 steps in the list, if you want to make Firefox more functional. (later on)

    Keyboard shortcuts:

  • I changed my "opinion" in full screen... How can I change from the Bar Menu with "view" is no longer available in "full screen"? I tried Esc, but it does not work...

    I used tab DISPLAY in the top left to change my mind in 'full screen '.
    Now I can't access the VIEW tab to restore. How can I change back so that this Menu will appear at the top of my screen?

    A few choices:

    1. F11 toggle full screen
    2. Move mouse in the upper part of the screen to menu bars, if show you them
    3. 'Alt + V' - to bring up the View Menu

    More information:

  • Does Vista support Core Duo on Satellite A100

    Recently I bought laptop Satellite A100-784 with Core Duo CPU and pre-installed Vista Home Basic and I have a question about.

    Among all the tables of comparison of the different versions of Vista that I found on the Internet, it has been said that Vista Home Basic Edition does not support the technology of modern processor dual-core. I would like to know the Vista that was preinstalled on my laptop Core Duo, if it a slightly modified version of Vista Home Basic with the CPU support double core or is it just a Vista Home Basic standard that doesn't support CPU Core Duo in its entirety?

    Why I ask:
    (1) I see no sence to change Windows XP that came before with Satellite A100 laptop series and who supported the technology double heart with operating system that may not cover all previous Windows features.

    (2) in comparison tables, it was also said Vista Home Basic is not compatible WiFi well in windows, I got with my computer laptop WiFi was preinstalled with a complete coverage of the operating system that makes me thihk that the preinstalled Vista is a bit modyfied in support of all possible features of this exact notebook.

    Someone could he clear to me?

    Thank you in advance.

    Please show me this comparison table, cant believe it :) Vista Home Basic supports processors Dual-Core as well as WiFi, what a question!

    Maybe learn you about multiple CPU systems. This could be. But two cores in one processor is not a problem!

Maybe you are looking for