iPhone screen do not respond

My iPhone 6 + is inadmissible screen intermittently since the last few days.  I tried hard reboots, downgrade to previous version of iOS, reinstall the new iOS, backup and restore, but nothing seems to work.  I find that if I do a few hard reboots in a row, I will get a few minutes of normal use of the appliance until it goes back to be inadmissible.  And often, when I can't control the touch screen, it seems to have a mind of its own - opening apps calling contacts.  It's almost as if he's possessed!

Anyone have any suggestions?  Thanks in advance!

I have similar problems after installing iOS 9.3. I upgraded from the 9.3 beta via OTA update and my touch screen intermittently will stop working. Usually happens to me while I'm in the middle of browsing the web. Looks like the physical buttons on the phone are not affected because I am taken to my homescreen when I press this button and the screen turns off on/when I press the side button. If I turn the screen turned off/on after the problem I can't drag to the right to get the PIN and usually end up restarting. Sometimes it seems that there is just a huge delay that I try to click on something and it will happen like 30 seconds later. This sounds like what you feel? I am on iOS 9.3, but I have a regular 6 +.

Tags: iPhone

Similar Questions

  • the iPhone screen is not responding and only works for short periods of time when I use siri for an indefinite period.

    Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...

    Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch.  It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature.  It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize.  You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.

  • Vertical lines flickering and the screen is not responding on my IPhone 6 more.

    My iPhone 6 Plus continues to have strange flickering gray/white vertical lines which slide down from the top of the screen on a regular basis, it does stop when I hit him in the back really hard and sometimes my iPhone screen does not, I would not be able to click on all of the apps I want and sometimes the phone would open up another application.

    Another thing is that when I pressed on the top of the screen of my iPhone, I see these white lines that are similar to there is water in which I think he does. My AppleCare expired recently and I'm afraid to go to a phone shop for repair because I don't have any knowledge about how much it will cost.

    Please help me.

    Visit an Apple Retail Store or Apple authorized service provider to check the phone. If you're lucky, the screen must be replaced if there is more internal damage, the device might have to replace:

    Pricing of the service repair screen

    Repair and replacement costs depend on your iPhone and your AppleCare products cover model. Apple runs a diagnostic test to determine if your iPhone has suffered additional damage. If she has, or if she needs more repairs, you may have to pay out-of-warranty service. Accidental damage is not covered by the Apple one-year limited warranty.

    Model Screen repair cost
    iPhone 6 $109
    iPhone iPhone 6s 6 Plus, iPhone 5 s, iPhone 5, iPhone 5 $129
    iPhone 6 sec more $149

    In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during testing. Pricing and terms vary for the service by an Apple authorized service provider.

    Out of warranty repair service

    If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
    Read the terms of Apple repair

    Model Out-of-warranty service fee Battery service *
    iPhone 6 s more, iPhone 6 Plus $329

    $79
    * available only if battery
    Apple diagnostic test failure

    iPhone iPhone 6s 6 $299
    iPhone 5, iPhone 5, iPhone 5 $269
    iPhone 4S $199
    iPhone 4, iPhone 3GS, iPhone 3G $149

    In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

    Off-warranty price varies for Apple accessories such as adapters and cases for Apple iPhone. For more information, contact your operator, Apple or an Apple authorized service provider.

    copied from answer Service Center - iPhone

  • Can't connect, connection startup screen will not respond to mouse clicks or keyboard

    I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

    Separated from the:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

    Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

    You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

    Tricky

  • Screen does not respond

    Hi all

    I have the already known problem that my touch screen is not responding. I already rebooted my phone but I can not enter my PIN. Because I'm on vacation I habe no possibility to connect my neigter z3C with mouse or PC.

    2nd thing is that I have this unknown symbol on my status bar. http://www.Fotos-hochladen.NET/uploads/image40yfz8uhvw.jpg

    Do you see a chance to solve my problem? I would also reset my phone so that I can make some pictures again. But don't know how to do without mouse or PC.

    Waiting for relief
    See you soon
    Tim

    If your screen does not respond to the touch then it sounds like a hardware problem, but I cannot go that you describe however for questions like this you would need to return your device to the place of purchase or contact the Xperia and have your device inspected http://www.sonymobile.com/global-en/support/contact-us/

  • How is - this hard I can reset my iPhone 5 with the broken home button and the touch screen is not responding.

    My iPhone 5, iOS 9.0.2 does not respond to touch. (broken touchscreen) and my home button is broken. my battery is fully charged so that it would take too long to wait until it turns off. I need a way to Hard reset it without a button at home and the touch screen. I know there are 3rd party apps that could do this, but I can't open my phone (no password protection) to 'trust' on this computer. If there are applications that could work around this? Any help is appreciated.

    There is no way to do it. You have 2 hardware problems. Time to replace the phone.

  • Superior 1/4 screen does not respond to the mouse - cannot disconnect sites when Logout button is in this area, IE. Facebook, banks, etc.. This does not happen with IE. I reinstalled Firefox without result.

    Menu bar, tabs, history, research, etc. work fine, but in this area, I am unable to access anything whatsoever. For example, on the Firefox help screen the area on the right side of the screen that shows my user id - Sign Out - Inbox - and other applications will not respond to the mouse. Therefore, I will be unable to sign using Firefox. This is true for every Web site I have access. Fortunately, at least one of the banks that I use has an additional journal on area at the base of the screen that can be used.

    Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

       * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    
  • Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

    Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

    Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

    Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

    I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

    I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

    I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

    Here is the vista forums

    Try the forums xp on the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Answers by topic

    Walter, the time zone traveller

  • Screen reader not responding

    I need help. I get this message more and more frequently lately:

    "Screen reader is not responding. NVIDIA Windows Kernel Mode Driver version 311.06 stopped and recovered."

    This afternoon, it didn't recover more. Got the blue screen, restarted system and get the blue screen again. It happened several times. Then I restarted in safe mode, but here, I could not access the video driver. The local computer store told me that is almost never the pilot, but the actual card. (May be overheating due to fan problem, etc.). Also they told me that these cards usually do not last that long (6 years).

    My questions:

    1. is it possible to diagnose this problem more away or should I just replace the map with a more powerful? (In fact I've been thinking the same before this problem.)

    2. What do you suggest as a more powerful card still works with this motherboard? (My motherboard is Asus P6X58D Premium and my card is ENGTX 480. OS: Windows 7 Professional, Adobe suite: CS5.)

    I thank very you much for any advice.

    -Laci.

    LACI, this is your driver display that is not responding.  Try to upgrade to the latest version and get it on the nVidia site.  My last download was 347.09 for my nVidia GTX cards as well as the version of yours is very old.  Of course maybe it's not the problem, but you should update the driver in any case if you get a new GPU

  • ThinkPad Tablet 2 screen/unknown not responding problem (s)

    I recently got a tpt2. He seems to refuse to power on. Rarely a green light appears stable for a few seconds under the front camera, but the screen remains blank. I listen carefully and sometimes I hear a humming like its working, but nothing. I tried the reset button, tried to access bios of th and any other operating mode / clicking on buttons or key combinations. Its almost as if the screen does not operate. I plugged it but me also uncertain whether its loading or not.

    Someone at - it ideas?

    you have a hardware problem, I had this last time, which required a new motherboard to put in.

  • My iphone screen has gone completely blank. I can still talk to Siri via activation of the voice and the phone still makes a noise when I plug it into the charger, but the screen does not respond.

    white screen

    Try a forced reboot. Hold the home button and power at the same time until you see the Apple logo. About 20 seconds or more.

  • iPhone screen & Home button respond intermittently

    Hi all

    my phone has developed a fault in the last days where he sometimes don't harvest of keys on the screen or relies on the button home for 10 to 20 seconds but then 10 presses you try to do it all together after the deadline. It's an iPhone 6s more running 9.3.5 and have not changed anything recently.

    Oust just wondering if anyone has experienced this / knows how to fix this problem before I return it to the store for repair.

    Thank you

    Below are the basic troubleshooting steps. try and test of the top to the bottom:

    Reboot / Force Restart

    http://support.Apple.com/en-us/HT201559

    Restore backup

    Restore like new

    http://support.Apple.com/en-us/HT201252

  • The iPhone screen does not

    Hello

    So my iphone 5 s screen froze and I tried to press the lock button to turn it off. The screen went black, but my stored music plays in the background. I could always adjust the volume using the buttons, but no matter what I clicked on the screen remains black. When I plug it into the charger, it makes the sound as it usually does, and when I hold down the button home, said siri "I have not heard that", but the screen still won't turn.

    I tried to reset it using itunes, but he said that I have to disable find my first phone... but I can't because the display lights :/

    Help?

    Press and hold Power + "Home" button until the Apple Logo appears

  • HP Jet 8: HP flow 8 tablets. The screen is not responding after dong a reset.

    I'm trying to recover a Tablet HP flow 8 because the latest version of Windows 10 locked up the tablet.  The problem I have is when I start the Tablet either by using the power button or reset the sequence (the volume down and power on), I get a message «has requested a change of the TPM on this computer configuration...» "with a Yes or no option to proceed.  The question is when I press the screen to answer 'yes' or ' ' nothing - happens the screen is inadmissible.  I have attached a keyboard and mouse to the Tablet hoping I would be able to complete this option, but nothing happens.  I have attached a CD-ROM with a 8.1 to windows boot disk and nothing happens.  Basically, I'm stuck with the brick.

    Any suggestions or help would be greately appreciated.

    Kind regards

    Mike Perrotto

    Hello, you use an OTG adapter and a USB hub powered to fix the keyboard and the mouse, and it still does not accept your entry?  You could try just the adapter of the OTG and the only keyboard.  Otherwise, try to turn on while raising both the volume and volume keys together to reset the BIOS.  If this does not work, try to leave completely discharged battery to reset the CMOS.

  • Touch screen does not respond in the middle of surfing

    In the middle of surf Facebook my touch screen was freeze and the only way to make it work is to go Task Manager and end the process.  What happens when he "feels like it". There is no model and the intervals are not compatible. I tried troubleshooting, different surveys drivers, monitors and all material that might be associated with the parser. I bought this computer from a friend about 2 years ago and this is the first issue of the magnitude. Help I need help.

    Hello

    Thanks for reaching out.

    We suggest you to update your driver. Click on this Microsoft article for more information. We also recommend you to contact the manufacturer of your computer to help you with your concern for touchscreen.

    Let us know if you have any other questions.

    Best.

Maybe you are looking for

  • create an iTunes Store account

    I'm trying to submit my podcast in iTunes. It redirects me to Podcasts Connect where, as soon as I log in, I get a page that says: "Podcasts Connect requires an iTunes Store account." I connect to iTunes and I am required to examine my info to set up

  • Thunderbird keeps by default to use the incorrect printer. How can I fix it?

    My default printer for all programs should be a Canon printer. Thunderbird by default keeps the Adobe PDF printer. I can change it to the correct printer when the print dialogue box appears, but it is annoying to have to do every time. I don't know w

  • Slow loading of web pages

    Web pages are about 60 to 120 seconds to load. I use Firefox 18, Windows XP. I tried to reset Firefox and from all modules and extensions disabled. (safe mode) No difference. I don't have the problem with Chrome or IE, isn't the connection. Thanks fo

  • HP 630: Bios password reset

    Hi my phone ask admin password at startup.  My code is 59395826

  • Antenna Satellite E105 can be used for a Wi - Fi connection?

    Can I use the antenna provided with the Satellite E105 to boost my WiFi?