Compatibility of programs

Similar Questions

• Reference Dell 375 Bluetooth no longer works after update Windows 8, R296919, blocked by the Compatibility Assistant programs - how to fix

  Hardware: Dell laptop with adapter Bluetooth 375 Dell running Windows 8

  Problem: after Microsoft Windows 8 update, all Bluetooth devices stopped working.  Moreover, they could is more to be discovered to pair them up.  Device Manager showed all works very well.

  Failure of attempts to repair:
  -Uninstall all components of Bluetooth in the Device Manager and analysis of the material changes.
  -Uninstall Dell 375 in programs & features (WIDCOMM Bluetooth Software) in order to reinstall (R296919).  The installation was quickly blocked by the program compatibility Wizard.
  -With the Dell software uninstalled, I thought that perhaps that it was no longer necessary, and so Microsoft software would work.  Yet once, I uninstalled all Bluetooth components in the Device Manager and analysis of the material changes.  Still could not pair.
  -Check in Bluetooth services and services were running.

  What worked:
  -Run GPEdit and go to the compatibility of the components/Application Computer Configuration / Administrative Templates/Windows /.
  -Enable the following:
  Remove Program Compatibility Property Page
  Turn off Application compatibility engine
  Disable the program compatibility Wizard
  -Run services.msc and stop the process of Bluetooth
  -Extract the R296919 in a directory
  - on R296919.exe and select run as administrator
  -For me, the installation failed the first time.  Then I repeated it, and it was installed fine, but required reset, which I did.
  -At this point, I was able to pair Bluetooth devices again.
  -Open Device Manager and go to the Bluetooth Module Bluetooth/Dell Wireless 375.  and select Properties.  Click the power management tab, and uncheck "Allow the computer to turn off the device to save power" and press OK.  If you do not perform this step, you will have all kinds of problems with Bluetooth devices, including keyboards and mice.
  -Reverse changes in GPEdit to not configured.
  -Reboot

  How to avoid the problem:
  Microsoft has an updated driver that States it is for the adapter Bluetooth of Dell 375.  on the update and select Hide update.  Microsoft has had quite a few black Tuesday lately, and this update is just another example.

  The above post started as a question.  While typing what has not worked, I developed the answer.

• Compatibility of programs of windows 7 to windows 8

  I want to scan my windows programs 7 to know the compatibility to windows 8. This utility is for Windows Vista to Windows 7, but can't find it now.  Please let know us where I should be looking or is it now gone. I won't change unless I know what the stakes are.

  Here it is:

  http://go.Microsoft.com/fwlink/p/?LinkId=321548

  Source: http://windows.microsoft.com/en-us/windows-8/upgrade-assistant-download-online-faq

  See also:

  The upgrade from Windows 7 to Windows 8

• Compatibility Application programs for programs that have worked with XP and previous... How to run on Vista and 7?

  I have the CD of ART, including a few programs from Microsoft that are beautiful.  Used on XP and previous programs.  Can't make it work on Vista or 7.  How can I make compatible?

  Hello

  Welcome to the Microsoft community where you can find all the answers related to Windows.

  That you are having problems with ART by the description provided, Cd does not work.

  Run the program in Windows XP compatibility mode and check.

  Make older programs in this version of Windows (Windows 7)

  Answer to us if you are having problems with the Cd ART or any other issue of Windows running, and we would be happy to help you.

  Good day!

  Hope this information helps.

• DELL WIRELESS 1450 WIRELESS USB ADAPT - compatibility issue program and that Dell SingleSource 802.11 WLAN

  Hi, is there anyone out there with the answer?

  Someone has already asked this last year, but no response.

  I've connected with TALK TALK yesterday and had to call technical support, for my wireless connection showed upward. With internet settings has changed, I can obviously connect.

  But because I ca using DELL WIRELESS 1450 WIRELESS USB ADAPTER I had TO re - run drive originally came with the adapter. But I'm now getting a message telling me: there is a known program compatibility issue and that Dell SingleSource 802.11 WLAN is not compatible with this version of Windows (Vista). This question-t - is there a compatible version? No solution is found when I select: find the solution online?

  Thanks, Sarah

  Sarah,

  Try to download and install this, I think this should work for 32 Bit and 64 Bit OS.

  Dell Wireless 1450 (802.11a/b/g) USB2.0 adapt

  Let me know if you have any problems.

• Application of compatibility of programs with Magic Jack

  Cannot access using Magic Jack, and when my number is dialed the call does not connect. Can make outgoing calls but cannot receive incoming calls! Cannot access the options to change the reference of appeal or personal greetings - it has become a useless feature!

  Any help would be appreciated!

  Hello

   
  1. Is there a code error or message?
  2. What operating system is installed on your computer?
   
  Method 1:
  Run the MagicJack application in mode generate and check. Check out the link and follow the steps.
   
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  Method 2:
  Check the link of the MagicJack and.
  The magicJack network ports that are using?

  http://MagicJack.com/FAQ/

• Compatibility of programs with the program called Allfit.exe back

  Dear Forum:

  [NIMH, Munson and al.] Allfit.exe does not work on Windows 7 and it seems to be no known workaround for the incompatibity.

  This program an old BACK but sets up and rub very well on Windows Vista 32 bit on a machine with two processors AMD.

  Thank you

  Joseph a. Ma, MD

  You don't mention what version of bit of win7

  If its 64 bit a back program will not run. You can try DosBox.com

• Compatibility with programs harvard graphics that can help me!

  Harvard Graphics, I can open en this software with Windows 7 64 bit, who can help me!

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• I recvd error 'program compatibility problem' for my logitech g27 wheel.

  Logitech G27 Racing Wheel game controller

  I recvd 'compatibility problem program' error for my logitech g27 steering wheel wheel.it has been running for 1 1/2 years.

  Hi, Raceready6,

  You have posted to the Feedback Forum of responses from Microsoft.  This question should be posted in the Forum located here games

  http://tinyurl.com/7rale6r

  Compatibility PlayStation3 game with Logitech G25 and G27 racing wheels

  This table is a sample of a few PS3 popular games released in the United States. If your favorite game is not on this list, the game can still support your Logitech wheel. Contact the developer of your favorite game for information more up-to-date on the wheel support.

  http://tinyurl.com/75y7gxc

  Steering wheel general troubleshooting of game consoles (Wii, PS, Xbox, etc.)

  If my wheel does not work on my game console (Wii, PlayStation, Xbox, etc.), what should I check before contacting support?

  On a console, there are two things to check if a wheel does not work in a particular game:

  • Hardware configuration
  • In-game support for ruffles

  NOTE: If you have a Driving Force GT, and most of the wheel works with the exception of the special as the PS button buttons and Horn, see article 10768 Knowledge Base. If you have a steering wheel Driving Force, and that you are trying to play a game that is inherited from the Playstation (PS1/PS2) on a PS3 console, see article 10767 Knowledge Base.

  Installation of equipment:

  To check your hardware configuration

  1. Turn off your game console
  2. Disconnect the power adapter of the wheel.
  3. If you have a wheel that mounts to a desktop, check the AC adapter cable is firmly connected. A loose connection in the steering wheel unit to be recognized.
  4. Check the working of the power source. Some wall sockets can be controlled by a wall switch. If in doubt, try to plug another device into the wall to check the functioning of the power.
  5. Check that the USB cable has not plucked or separations in the thread.

  In-game support:

  To see if the game is compatible:

  1. Logitech.com is trying to keep a list of the supported games on the product page of each wheel. If your game is on this list, then it is certainly supported. If this isn't the case, you may need to contact the developer of the game.
  2. If your game is listed as supported on Logitech.com, but you can't use your wheel again, your game or console may require an update. It is recommended to connect your console to the internet, and then start the game in question. If your console is connected to the internet, most of the games automatically checks a status update. Try to complete each game, in addition to your console, if necessary.
  3. Try a different USB port. Some games have specific requests of what port should be connected to a wheel.

  Additional information:

  If you try these steps and your drive still does not work, contact Customer Service. The representative may ask you to repeat, or perform some variants, these steps to check the activity of the wheel. Perform these steps with the technician can resolve your case, we recommend following the steps requested by the technician.

  http://tinyurl.com/7lerfvt

• Programs running in Compatibility Mode (Windows 98) does not work (or more)

  For years, I have been (re-) installation file SETUP.exe (Epson status monitor of 1998) in Compatible Mode on a regular basis.  I right click on the file SETUP.exe, then I push properties-> compatibility-> Mode Compatible and complete under Windows 98/Windows Me.  Sometimes I run the file SETUP.exe in Windows 2000 mode also, never a problem.

  However, recently, I used DLLArchive and now the sweet Epson no longer works.  Resettlement does not either, as it must be installed in Compatible Mode and that no longer works.  In addition, run the file SETUP.exe in any Mode Compatible (Win95, 98, Me, NT, 2000) no longer works, even in non-compliant.

  I still get the same error:

  "To install EPSON Status Monitor 2, you have Windows95, NT3.1 or NT 4.0"

  While SETUP.exe is clearly compatible Win95/98.

  Earlier today, I couldn't use the Compatibility Assistant programs, whenever I had a "marscore.dll is missing" error when opening start-> Help and Support.  This problem is now solved: help and Support, and then the program compatibility Wizard work fine (I think).

  Any suggestions how to solve the compatibility problem?

  How can I check what DLL files are needed?

  Thanks in advance, Johan

  http://www.pcreview.co.uk/forums/unable-install-Epson-status-monitor-t2043535.html

  http://files.support.Epson.com/htmldocs/pro9k_/pro9k_rf/ref_G/statw_1.htm

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=14422&infoType=downloads

• When I try to play windows game "legends of ARANNA Dungeon Siege" says that this program has known compatibility issues

  Original title: when I try to play the game "Dungeon Siege legends of ARANNA" windows says that this program has known compatibility issues can I solve this if so please tell me how__I use windows 8

  When I try to play the game "Dungeon Siege legends of ARANNA" windows says that this program has known compatibility issues can I solve this if so please tell me how__I use windows 8

  Hello

  Please contact the Microsoft Community forums.

  Looks like you are unable to play 'Dungeon Siege legends of ARANNA', he says that it is not compatible with the operating system.

  1. have you recently upgraded the operating system?
   
  2. who is the operation in which the game worked fine before?

  This seems to be a known issue with the Windows 8 and Windows 7.

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductDetailsViewer?Name=Microsoft%20Dungeon%20Siege%3A%20Legends%20Of%20Aranna&vendor=Microsoft&Locale=1033&BreadCrumbPath=Dungeon%20Siege%20legends%20of%20ARANNA&Type=Software&tempOsid=win8

  However, you can try to run the game in Windows XP SP3 compatibility mode and check.

  Please follow these steps to install the game in compatibility mode.

  a. right-click right the installer from the installation file and select Properties and then tap or click on the compatibility tab.
   
  b. check the run this program in compatibility mode for: box.
   
  c. press or click the menu drop down and select a Windows XP SP3, and then press or click on OK.

  What is program compatibility?
  http://Windows.Microsoft.com/en-in/Windows-8/what-program-compatibility

  Program Compatibility Assistant: Frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-8/Program-Compatibility-Assistant-FAQ

  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Hope this information helps. Get back to us if you have more queries about Windows.

• I tried to install master egames of bingo on windows 7 - given that I saw a program that could adapt xp etc to make it compatible. Is it possible to install this.

  The title is games in windows 7.  The case try to install egames bingo master special edition. Galaxy of games worked on my old computer with xp.  Loads of Butler, but bingo games does not work.

  Let's first try the easy solution.  Click Start, type compatibility in the research field, and click the enter key. This will bring up the resolution of the problems of compatibility of programs.  Click Next and it make a quick check on your machine.  It will ask you to select the program that you are having problems with, and then click Next.  Click troubleshoot program, then check the box for the program worked in earlier versions of Windows...  Windows XP (Service Pack 2)-click , then click on Next. Click on the box for start the program. He will try to open the program as if you were using XP. Once the program is trying to open, click on Next. Now it will ask if it worked for you.  If so, click on Yes, save these settings for this program. If you clicked Yes, every time that you open the program now he opens as if it was running under XP.  That if it worked!

  Sometimes this method does not work.  For these cases, there is a new feature called XP Mode, which will install a virtual machine before you run your program in.  This feature is available in the professional versions, full and Enterprise edition. It is not too hard to get set up. It actually installs a copy of Windows XP before you run your program in.   Here's a Microsoft article on how to get it set up: http://www.microsoft.com/windows/virtual-pc/.  XP mode now works even if you do not have the chip installed for hardware-assisted virtualization technology.

  Barbara

• I'm trying to run a game in windows 95 compatibility mode, but the compatibility under Properties tab disappeared.

  I am running windows 7 Professional. It is not the version of upgrade.

  Hi Tippo_89,

  Welcome to the Microsoft Answers site!

  (1) have you been able to use the compatibility feature earlier?

  Try the steps below and see if you can run the program.

  To run the troubleshooting program compatibility Troubleshooter

  (1) open the resolution of the problems of compatibility of programs by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  (2) follow the instructions contained in the resolution of the problems.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  Access the link below for more information on the steps below.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know of any other help

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• compatibility for windows XP

  I use windows XP service pack 3. how to change a compatibility of programs in it? I tried by right click on the desired program and then properties

  Windows XP Compatibility Modes are used to allow the BONES emulate older , like Win9x, WinNT and Win2K operating systems to help legacy applications.

  If you are already running Windows XP, there is obviously no "Compatibility Mode Windows XP".  Only more recent operating systems, such as Vista and Windows 7 might have a built in Windows XP Compatibility Mode.

• Some programs of UAC-virtualized cannot load the dll - possible consequence of KB2859537 (ASLR)?

  Dear community of readers and contributors.

  I started noticing this last August 15. Shorty after a bunch of updates system on my Vista Ultimate 32 bit, a few programs stopped working, with different error messages: "this application has failed to start because wxmsw28u_core_vc_custom.dll is missing. Reinstalling might solve the problem', 'User lib not found', 'this application is not correctly installed. Please install the application. I was wondering about some possible lack or corrupted DLL until I noticed:

  (1) all the programmes concerned are virtualized-UAC
  (2) if I delete their files virtualized in the virtual store, they can start again, until they wrote in the virtual store again, and then once I left him, they start again
  (3) if I disable UAC virtualization for these programs (by the Compatibility Administrator), programs are able to start again (but with other problems, of course)

  Clearly, there is a change in behavior that reminded me of these recent updates and after a check that I have the impression that this one, KB2859537, that modifies the ASLR may very well be responsible for this. I saw no viable solution right now, you have any advice?

  Without details I've probably will disable ASLR completely on my system, just to see if it does the trick, but I'm considering not live like that, of course...

  I don't know if EMET has options to disable by program the ASLR, will download and try it. These programs are not compatible ASLR, but I could try disabling ASLR on UAC virtualization file system filter, if it is possible...

  Thanks for your help!

  False alarm, I finally found a solution that makes me think it is unrelated to the patch of the ASLR. In which case it can come useful for others, problems related to programs on an external USB hard drive. Plug before starting the system is likely to solve the problem, but I found another one: open the file of the volume that is affected, then try to eject safely in the notification area, which will fail because a file is opened. This brings things in order for whatever reason I don't know currently...