Compatibility processor PowerEdge R320

Similar Questions

• Video card HDMI in DELL PowerEdge R320

  Buongiorno,

  Announcement of riguardo chiedo UN UN Dell PowerEdge R320 informazione:

  Ho di installare una scheda video by poter cute need a monitor HDMI quindi con uscita is dedicated.

  Could gentilmente elencarmi quali sono compatibility modelli con questo Server?

  Thank you, Andrea.

  Buongiorno,

  will one OTS ' email by putting our server it service tag del suo.

  Grazie

• Installation of Windows server 2008 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  Even I have the same problem... Can anyone suggest a solution?

  Thank you

  Scott

  http://www.vmexplore.com

• Where can I buy screws for 3.5 "caddy for PowerEdge R320

  My PowerEdge R320 has 4x3.5"caddies at the front. I need screws to fix my hard drives in caddies.

  I can't find these screws anywhere. Where these can be purchased?

  Any decent hardware store. Take a a place like Home Depot to compare to get the right type.

• PowerEdge R320 RAM

  I have server PowerEdge R320

  Can I use NON ecc Ram? If so, can I mix it with ecc RAM?

  Thank you

  No, only ECC can be used. RAM ECC can be UDIMM or RDIMMS, and they cannot be mixed.

• New server PowerEdge R320 + 2 x 500 GB

  Hello

  I have new PowerEdge R320 with HARD 2 x 500 GB disc. But now, I'm a little confused how I can install Windows on this server?

  I need, but these in RAID1 mode HARD drives. I checked that mode is SATA and H310 integrated RAID controller is on and I created virtual disk RAID1. But when I run the install with Windows 7 or 2008 R2, I can't find the HARD drive more. I tested a lot of driver that I can found in the support site, but nothing.

  If I change the SATA RAID mode then I can use H110 virtual RAID? But I can't create it virtual disk or RAID1. There I found the drivers, but I can't then do RAID1.

  So what I missed?

  You need drivers for the H310:
  http://downloads.Dell.com/FOLDER02416328M/2/SAS-RAID_Driver_W2K8R2_D5N8T_A06_6.802.21.00_ZPE.exe

  Download and run it to extract the files before use, then put the files on a USB flash drive and click on the link to load the driver on the Setup screen where readers would normally be disclosed.

  Let onboard SATA mode SATA or ATA (non-RAID) - it is only for the DVD player.

• Installation of windows server 2008 R2 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  PS: I posted the same topic in the forum "Blade" by mistake. Apology.

  "Do you mean that if my BIOS/SATA configuration has been set to RAID 1 I should have drivers chipset/AHCI for a successful installation?"

  No, because you are not using the onboard SATA RAID - your built-in SATA is used ONLY by your optical drive, so it should not be in RAID and AHCI usually requires special drivers, which is not required when you use optical drives.  However, pilots of chipset/AHCI may have helped Windows to see the optical drive in such a way that the installation could proceed (if she needs the RAID controller for real hard disks, you will NOT see this particular message - you will see another message when Windows cannot find not all drives to be installed on).

  "When someone would set RAID 1 for sata configuration?"

  ONLY if you use the S110 RAID controller onboard.  You use the H310, so you don't want to mess with the SATA RAID on board.

• Compatibility of PowerEdge 2900

  I'm currently checking the Compatibility Guide and I can't find the PowerEdge 2900 III but not the PowerEdge 2900 for VSphere

  I can't find anything on my systems I have a 2900 III. I only 2900.

  Will I have questions if I go from 3.5 to 4?

  Thank you!

  VMotion will work with compatible processor but if you insatll integrated you must have 2900 III

• Upgrade processor PowerEdge T410

  I have a PowerEdge T410 with a processor Xeon e5502 two hearts.  I would like to upgrade the processor e5506 with its four hearts.  I have one available and wonder if the motherboard will handle swapping out.  I would also add a second if it will work.  Thank you.

  Yes, an e5506 works perfectly:
  http://i.Dell.com/sites/content/business/solutions/engineering-docs/en/documents/PowerEdge-T410-technical-Guidebook.PDF

• Processore PowerEdge T410 [MS]

  Buongiorno.

  MI servirebbe one ' offer by a nuovo processore per a PowerEdge T410 server.

  Di is so a processor Intel Xeon E5620 (2.40 GHz, 4 C, 12 M Cache, 5.86 GT/s QPI, TDP 80W, Turbo, HT), 1066 MHz Max Memory.

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Upgrade processor PowerEdge SC1430

  I have a SC1430 with the processor Xeon 5110 (dual core 1.6)

  I bought a X 5355 (quad core 2.66) because it was on a few lists of processors supported, some on these forums.

  But when I installed the processor that it displayed but then stopped, saying it was incompatible.

  I went back to google and found a post saying that there are different versions of the card mother sc1430 and old does not support the hearts. But then another message saying there aren't any different revisions of the motherboard and you just need to update the firmware. Ive updated the BIOS to 1.4, but this still does not work. I then found a third post saying 'I' (printed on the front panel) version only supprts demspey and woodcrest and that 'II' also supports clovertown.

  I think I discovered that the x 5355 does not work with my computer, but it would be good if someone could resolve the confusion that I know which is the cpu, compatible for my SC1430.

  Thank you

  Hello

  DevaVictrix

  I went back to google and found a post saying that there are different versions of the card mother sc1430 and old does not support the hearts. But then another message saying there aren't any different revisions of the motherboard and you just need to update the firmware. Ive updated the BIOS to 1.4, but this still does not work. I then found a third post saying 'I' (printed on the front panel) version only supprts demspey and woodcrest and that 'II' also supports clovertown.

  Support for the quad-core on the SC1430 Clovertown processors requires a map of most recent revision system, is not simply an update of the BIOS to add Clovertown support to the original system board that has been released.

  There are also minimum BMC and BIOS revisions that are needed to support the Clovertown CPUs. There are minimum version requirements based on the CPU stepping.

  Systems shipped with a motherboard that supports the Clovertown processors will have a Roman numeral two on the right side of the collar.

  Thank you

• PowerEdge R320 - S110 PERC upgrade to PERC H710

  I installed a H710 PERC integrated in my R320, which originally shipped with the S110 PERC.  The controller recognizes the 2nd virtual disk, but not the first, which is the boot drive.  It just shows that the 2 discs unconfigured.  Both work very well when I plug the cable into the S110.  What Miss me?

  Thank you

  John

  Hello

  Between the S110 and H710 RAID migration is not supported. You will need create new virtual disks on the H710.

  Thank you

• PowerEdge R320 cable for SATA?

  Hi all

  I recently bought a new (ok, almost new 'store') R320 server, that happened and seems to be wired to the SATA drives (non - hot). No hard drives have been included in the system - I was aware of this ;-)

  I also have two Dell 2 TB NearLine SAS / 6 GB/s / 7.2 k / 3.5 HD ... so my question is, what exact cable I need to buy & replace, so that I can use these SAS drives in my system which is already wired for SATA?

  What I read, the controller integrated PERC H710 supports SATA and SAS, then is it just a matter of buying the SAS cable and its connection to the SAS_A on the H710 port?

  Thanks in advance

  -Patrick

  My apologies. Discover one of these reference numbers:

  XP00F & H3YKR

  They should be available in the United Kingdom.

• Grouping of network cards on the PowerEdge R320 and R720 servers

  Hello

  I have several R320 servers with quad port NIC broadcom. I would like to configure the collection of NETWORK adapters on the Server 2008 R2, but I couldn't find a download on the website of Dell application, could someone ' a please point me in the right direction.

  I also have a Dell server with Vmware Esxi 5.1 R720, is it possible to configure NETWORK cards on this grouping?

  Thank you

  Dan

  Guys,

  Is the possible consolidation of NETWORK cards? I would have thought that it is something that would be fairly simple with the right driver.

• Installation of Windows Server 2008R2 on Poweredge R320 fails

  Hello

  It is not possible to install W2008 server.

  The Windows Installer process request a CD/DVD driver. We have no CD driver and we did not found a DVD driver on the support sites.

  Any ideas?

  Thank you for the help

  Stephan

  Try disabling the S110 controller built into the BIOS.

  You can also try loading the drivers for this controller during the installation.

  If none of the above works, your installation media is likely bad.