Compatible BSOD after updating Windows 8 at the driver Razer Anansi

Similar Questions

• BSOD after Logo Windows at startup: bad driver, AutoFailover

  I get BSOD after Windows Logo at startup. Said Startup Repair: bad driver, AutoFailover.

  Two weeks ago, that I was getting the same BSOD after logo, but only with the bad driver. I not did something to fix it (or Startup Repair), it's just dissapeard after a few days. Also, the last day that I was getting BSOD, the night when I started my pc, it remained 2 minutes at Intel Boot Agent initialization and also 30 seconds to the black screen that follows (before the windows logo). When this situation occurs I get more BSOD. I tried to restart my pc but I stayed another 2 minutes to the Intel Boot Agent initialization. This problem has been fixed in the next morning, when I started my PC, even once, I don't know how, I did nothing. I remember that it is sometimes used to stay 2 minutes Intel Boot Agent, even when I was on Windows Vista, and it also sets automatically.
  I upgraded my BIOS a few weeks before getting the BSOD, but I don't think that's the problem. In addition, there was no new driver installed before getting the BSOD, drivers have been installed after the first BSOD (even if the event viewer and the reliability monitor do not mention the first BSOD, only those who have followed the installation of the driver I know there's a BSOD before, I'm sure.)
  My system: HP Compaq 8510w (Original with windows vista bussines, did a clean install of 7 ultimate)
  BIOS version: F.20

  C: drive has only 10% free space - 15% free space is optimal for Windows

  Please visit the site Web of the manufacturer of the PC and download/install all drivers.  These are devices that lack the drivers:
  *******
  Controller of communication Simple PCI PCI VEN_8086 & DEV_2A04 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 18 that the drivers for this device are not installed.

  Serial port PCI PCI VEN_8086 & DEV_2A07 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 1 b, that the drivers for this device are not installed.
  No available ACPI\HPQ0006\2 & DABA3FF & 2, the drivers for this device are not installed.

  Base system device PCI VEN_1180 & DEV_0843 & SUBSYS_30C5103C & REV_10\4 & 118B1C9 & 0 & 34F0 the drivers for this device are not installed.

  Fingerprint Sensor USB\VID_08FF & PID_2580\5 & 1E4845E3 & 0 & 2, that the drivers for this device are not installed.

  RICOH PCMCIA\RICOH-BAY8CONTROLLER-F1B2\1 Bay8Controller the drivers for this device are not installed.
  ******
  Please uninstall ATI Tool - it does not work in Win7 and may be responsible for your BSOD (and its drivers are from 2006).  More info here: http://www.carrona.org/drivers/driver.php?id=ATITool.sys

  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BSOD BUGCHECK SUMMARY
  The debugging session: 05:54:32.426 Fri 31 August 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\083112-17019-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:08.455
  Bugcheck A, {7bcc, 2, 0, 82afb482}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! DeleteNodeFromTree + 46)
  Error checking code 0000000-a
  Arguments 00007bcc ', memory IRQL bitfie 82afb482 00000000' 00000002',' address
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  BUGCHECK_STR: 0XA
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xA_nt! DeleteNodeFromTree + 46
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:17:05.296 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-17004-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:11.356
  CD error checking, {8931d 000, 0, 82a271f2, 0}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  WARNING: Unable to verify timestamp for ATITool.sys
  ERROR: Module load completed but symbols can be loaded for ATITool.sys
  Probably caused by: ATITool.sys (ATITool + 2017)
  000000cD Bugcheck code
  Arguments 8931d 000', memory 00000000' 82a271f2 value ', if not 00000000', int Mm
  DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
  BUGCHECK_STR: 0XCD
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xCD_VRF_ATITool + 2017
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:00:26.646 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-21933-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:07.675
  Bugcheck 1000007E, {c0000005, 82c2e4a4, 80786888, 80786460}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! ObpLookupDirectoryEntry + 2 b)
  Bugcheck 1000007E code
  Arguments c0000005", ex-82c2e4a4 ', the 80786888 ad', except 80786460', Contex
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  Nom_processus: System
  BUGCHECK_STR: 0X7E
  FAILURE_BUCKET_ID: 0x7E_nt! ObpLookupDirectoryEntry + 2 b
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

• BSOD after updating Windows 12/02/10 - have XP - how to fix? Help! ____

  Start in safe mode will not alternate between black and blue BSOD - until - must / can do?

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  =================================

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BSOD after updating Windows and it is not installed.

  A blue screen of death appears whenever I put it in sleep mode, standby time, turn it off or restart.  It happened from a windows update when I started it up after it stops after the update, and she appeared with another update.  He still wants to install the update, but it still gets a BSOD at the end.  The BSOD seems to point to usbhub.sys.  Thank you.
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: 1000007e
  BCP1: C0000005
  BCP2: D 907 5013
  BCP3: ACF80B68
  BCP4: ACF80864
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini042210-01.dmp
  C:\Users\office depot\AppData\Local\Temp\WER-113724-0.sysdata.xml
  C:\Users\office depot\AppData\Local\Temp\WER5DC8.tmp.version.txt

  You indicate that you get blue screen after the update is finished installing. Or do you find only the blue screen when you perform certain functions with the system which requires a State of transition of power (sleep, restart, etc.)?

  You've got bugcheck SYSTEM_THREAD_EXCEPTION_NOT_HANDLED caused an access violation.

  You can download the contents of c:\windows\minidump on your SkyDrive? The discharge can take probably a few additional details.

  To treat blue screens, following general tips:

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  For the case of memory corruption such as you seem to be experiencing, it may be useful to use Driver Verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for an error checking to happen after you have enabled the auditor as described and then transfer it to your SkyDriveand provide a link.

• BSoD after updating Windows on Win7 Pro SP1 x 64

  So, yesterday windows had installed updates for my machine, but now when I turn it on, it crashes with this error

  PAGE_FAULT_IN_NONPAGED_AREA 0 x 00000050 (win32k.sys)

  I didn't install anything last time, it was only windows update itself

  Thanks for the reply

  Apparently my first answer could not be validated, so I'll try again:

  Its a known issue, see this post for a way to repair:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/blue-screen-Stop-0x50-after-applying-update/6da4d264-02d8-458e-89e2-a78fe68766fd

  Also:

  Customers who are unable to restart their computer after installation of this update can be found steps of resolution published in the section known issue from Microsoft Knowledge Base Article 2982791.

  J W Stuart: http://www.pagestart.com

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• After updating windows 7 Edition family premium my phone regularly crashes when you try to access the folder

  After updating windows 7 Edition family premium my phone breaks down regularly when you try to access the folder - I installed several updates, correct its and also removed countless system software - can someone help please!  It normally occurs when you access my folder music or documents, even if they are empty! I'm using an asus laptop

  There is no free or paid for the software will fix PC problems

  'used cmd & scan' could mean allmost anything.

  Apparently, you have a portable computer, you do not have scource drivers for a laptop computer via windows update (unless this portable machine said) but this laptop manufacturers support site, then visit this site of support of decision makers and reinstall all the drivers available.

• After updating Windows 10, the CPU cannot push frequency.

  After updating Windows 10, the CPU cannot push frequency. The setting of the battery's performance. Alienware 15. Really need help

  You will probably get a better response if you re - post it in the forum of the Club of Alienware

• My laptop has sometimes bsod after updating!

  I have a laptop HP running windows 8 32-bit! I don't know who it is! It started about a week after I got it! I kept getting bsod after updating. My brother recommended I have download ccleaner which got rid of bsod for about 2 months. I think that burning causing the bsod has some images of memory. Recently updated. I have ccleaned but no memory dumps were found. I thought that windows had finally corrected this bug. I used my laptop for a day! And then all of a sudden the BSODs happened. I did not worth it to go back on my PC. Please can someone help me!

  Hey Mohindra3

  Looks like you have a problem with persistent blue screens. It would help to know which model you have.

  If you need help with this information, you can follow this link.

  It would also be useful to know if you upgraded to Windows 8 32-bit.

  Another step, you can try running a diagnostic test on your hard disk and RAM. Follow this link for steps on it.

  Blue screens can sometimes be caused by damaged or incompatible drivers. The hard drive and RAM diagnostic tests will help refine the question though.

  You could also provide with the minidump file that will give me a lot of information. You can navigate to C:\Windows\minidump. You will need to download the newest .dmp file to a third party site, (such as sendspace.com or filedump.com or another site like those) given that the HP forums do not allow this type of downloading files. Just to provide me with a link to the site whatever you choose so that I can take a look at the .dmp file.

  I hope these steps help! I'll keep an eye out for your answer.

• Update Windows automatically restarts the computer. I would like to disable this feature.

  Update Windows automatically restarts the computer. I would like to disable this feature. I'm running a machine business with complex projects requiring a configuration long and delicate. The details below:
  Type of operating system: Windows 7 Ultimate
  Problem: Status of the project lost after auto restart during the night
  Require: A method of disabling automatic restart after an automatic update is happening.
  Tried: I already tried looking in the registry for an appropriate key change, but no have been found appropriate.

  Aelryn,
  You can configure Windows update to meet your needs, for example, download the update and then let me choose when to install the same. This way you always get the automatic updates but you chose when and where and how to install updates at a time that is convenient.

  Then I suggest to change the Automatic Updates settings to meet the needs of PAHO.

  Choice, you can turn off to THE (not recommended), you can adjust to download updates only and allow you to install them at a convenient time, you can adjust information only, or you can leave to do what he likes.

  If you update, you must restart sometime in the case otherwise you are not protected and you might as well do not update at all. Everything is a matter of choice. One size does not fit all, so a choice can be made. I have updates informed me only, then I decide what, when and how to do to install the updates. It's my choice.

  FYI -.
  http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx
  TaurArian [MVP] 2005-2010 - Update Services

• Update Windows automatically uninstalls the old updates that are not required?

  I recently installed my OS with the CD from the laptop that my system has been crushed. After you install a new Visa OS with laptop manufacturer's CD, he asked to install recent updates. The update of windows has installed the recent update one by one and themselves 237 update of windows which is really eating my disk space. Updates Windows automatically uninstalls the old updates that aren't necessary?

  Hello Stephen,.

  you hav to understand that there is no unwanted updates

  the best way to wat you can do is to install service pack 1 and 2 will have all nessaccery updates.

  You can find more information on this link

  http://support.Microsoft.com/kb/935791

  I hope you like my suggestions. Please mark as if you think that the suggestion to have fullfilled your quiry!

  cheeers

• After updating FF later, all the names of people with disabilities & messed usr

  After update of FF to the most recent (FF21-> FF49.0.2), all the names of people with disabilities & messed usr. So when I go to any login page, ago selected from various usernames, but disabled people come. Therefore, total hassles & no use. There is no other Q & A, this could be an isolated problem. Should a safer update in the steps as 21 to 28 to 43 to 49 or what is recommended to avoid this problem?

  Firefox 21-31 to memorize the connections a database file named signons.sqlite in coordination with signons3.txt . Firefox 32-49 now use logins.json in coordination with signons3.txt to store connections.

  What version do you have now? If you use a newer version than Firefox 31 - Firefox 32-49 - you can try to configure Firefox to redo the conversion of signons.sqlite in logins.json as follows:

  Overview

  Step 1 is to change a preference, step 2 is at the exit of Firefox and hide logins.json step 3 is to try a new conversion

  Toggle a preference

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the access code and make a pause so that the list is filtered

  (3) double click on the preference signon.importedFromSqlite to switch the value from true to false (after Firefox performs the conversion once again, this will be true in itself)

  Hide the messed up the file logins.json

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Break while Firefox finishing his cleaning, then rename logins.json to something like logins.old, or I guess you could remove it if it is really unnecessary.

  Launch Firefox to trigger a new conversion

  Launch Firefox back up again. The transformed logins with success this time?

• After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  Hello

  Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  Let us know if this helps!

• Beats Audio DOES not work after update windows 10.

  Beats Audio does not appear in WIndows after upgrading Windows 10. The icon is missing from the system tray, control panel and in the search bar. Cannot find the drivers in the HP store.

  Guys, please help. The audio is not good without configuration Audio Beat.

  Thank you

  Jain darshan.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

  Hello

  Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

  I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

  See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

  Any idea?

  Hmm... it's strange?  :|

  The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

  I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

  However, the deal seems clear don t install if the pilot is not designed for your operating system.

  Concerning
  …