Completed tasks remain in the queue, subsequent job does not print.

Similar Questions

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• HP Photosmart C6380 all-in-one intermittently print job does not print

  My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer.  I can see the print job listed in the queue, but it fails to print.  I might have to send the job once again, twice or 3 times before it will finally print.

  Try to stop and start the print spooler. I will include the instructions below.

  1. click on the start menu.
  2. in the search box, type services.msc and press enter on the keyboard.
  3 scroll to find print spooler.
  4. Select the print spooler in the list.
  5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
  6. now it say start. Click Start.
  7. close the window.

  If this does not work, try to bypass the print spooler. I will include the instructions below.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. make sure that "Print directly to the printer" is checked.
  7. click on apply to save the changes.
  8. click OK to close the window.

  If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.

  http://goo.GL/zCk2r

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• I changed the ink in my printer, it worked twice after that, but now the ink lights. Does not print.

  The printer is an EPSON multy 3 in 1 NX100series Stylu.

  Contact Epson or check their support website to see what could be the problem.  This indicates a hardware problem with your printer, not a Windows problem.

• Reference Dell V515w printer does not print second job

  I can print 1 post.  The second task remains in the queue until I do a restart.  How can I get my printer to print the second job without performing a reboot?

  I had the same problem and went to Microsoft forums and have tried many suggestions, I saw on the autumn 2013 Dell support site, IE 11 may be the problem

  uninstall IE 11 failed. Microsoft community Web site, it said to run from the admin command line

  ORFILES/p %WINDIR%\servicing\Packages/m Microsoft-Windows - Internet - Explorer * 11. * .mum /c "cmd /c echo uninstalling @fname package & start /w pkgmgr /up:@fname /norestart.

  got error messages, but it has worked and solved the problem

  Then, of course, a problem with interaction between IE 11 and some Dell printers. I asked the Coordinator of the Microsoft forum if we could report the problem to Microsoft. It would seem that Dell support needs to talk to Microsoft to resolve this problem and not just pointing the finger at the other.

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• Adobe Acrobat DC does not print the images in point 8.1 of Windows

  I am trying to print a PDF document that contains 2 pages on the first page, there is a table containing information on the second page, there is an image that covers almost the whole of the page. However, when you print the PDF file, the first page is printed right on the second page it does not print anything.

  Any of you are familiar with this behavior?

  Thanks for your help.

  Hi borisdiaz,

  Open Acrobat DC, navigate to the Edit menu-> Preferences-> Security (Enhanced)-> disable Protected Mode.

  Also, try the solution mentioned in my previous comment.

  Kind regards

  Nicos

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I can't on my Brother MFC-9325CW printer - everything comes back as a mistake and remains in the queue

  I installed my printer Brother MFC-9325CW, and it will not be printed.  Whenever I send a document to the printer, it reads like a mistake and remains in the queue as an error.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• When I complete and sign a form and then print it out, the form data does not print.

  When I complete and sign a form and then print it out, the form data does not print. The form fields are empty with the exception of any signature.

  Thank you. Depending on your answer, I have compiled a procedure:

  Fill & sign a form in Adobe CD and print the form fields:

  (1) open the document.

  (2) click on tools - prepare the form. All fields are displayed in a vertical list in the bottom right of the screen.

  3) click on the first field in the list, scroll to the bottom of the list and shift-click to select all.

  4) click on the first field in the document, make a right click, select Properties.

  (5) on the general tab, uncheck the box locked in the lower left corner. Under field properties common form, select Visible and uncheck the read-only box, close.

  (6) print out and save the file.

  Note: even if you select all the fields in the document in step 3, this procedure may work for the fields on page 1. In this case, repeat steps 3 through 5 for each subsequent page.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk