Completion of operation Fill DataService

Similar Questions

• Cannot complete the operation of network against My Oracle Support

  The weirdest thing that happens to me, new installation of 12 c, with the correctly filled out proxy settings, with proxy test works successfully, with the CCR download at MOS, I am not able to connect to console 'EM MOS, reception:
  
  Cannot complete the operation of network against My Oracle Support. Please check the network connectivity to the Oracle Support Site.
  
  eMoms.log is filled:
  
  + 2012-07-18 11:30:13, 537 [EMUI_11_30_13_/console/mos/signin] ERROR handlers. SigninHandler logp.251 - SigninHandler0: impossible to establish a proxy connection: 407 Proxy authentication required.
  oracle.sysman.emmos.common.exception.EMMOSException: 0: could not establish a proxy connection: 407 Proxy authentication required
  
  Seems half of 'EM is aware of proxy setting and the other half is not.
  I open SR but the named person will be able to help me because apparently, he doesn't understand a thing I want to talk. I hope that I will find someone who is willing to help out here.

  Can you use the same domain in proxy page you found in the trace: "Infrastructure to browse" & give it a try.

• CenterStage could not complete the operation

  Since I had this laptop after started all programs at startup and I start to use the computer, a message appears telling is "the application could not complete an operation.

  The application seems to be "Centerstage".

  I can not even find this program anywhere on the hard drive to remove it.

  Help!

  

  Hello Ed Gonzalez,

  It seems that the problem is related with VAIO Messenger. For more information, see the following link:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1016148

  Try disabling popup notifications.

  1. In order to disable, click the settings icon in the VAIO Messenger folder that is located on the Windows Start menu.
  
  
  2. Following settings, access to configure menu.
  
  
  3. You can also click on the settings button at the bottom of the VAIO Messenger Inbox window.
  
  
  4. Once the setting menu has opened in a new window, uncheck the box titled "reminder when I have items in my VAIO Messenger Inbox.

  If the problem persists, uninstall and then reinstall Messenger VAIO:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1029538

  Download VAIO Messenger from the following link:

  http://DDNI.o.miisolutions.NET/Sony_VAIO_Messenger_Setup_2.0.326.0_SKU6514.zip

  Please indicate the solution as accepted, if you find this information useful.

• Not enough memory to complete this operation.

  I had a glance through the assignments to the title of this topic and no solution to the error that I am experiencing.

  My LabVIEW application runs on a windows 7 PC and receives messages from an application running on tha RT PC LabVIEW TCP/IP.  These messages from 4 k to 7 k bytes in length and reception are queued in the comms TCP/IP thread and removed and converted to the appropriate data type for display on the front panel in another thread (design of producer/consumer).

  After running for between 1 and 24 hours, one or more "not enough memory to complete this operation.' dialog boxes are displayed.  This interrupts the execution of the application, but these closing dialog boxes allows the application to continue running.  What I find strange is that if there is not enough available memory how is possible for the application to continue running. Windows resource monitor display shows that there is always some 1.1 GB available.  Also, what is strange is that there no noticeable change in memory is committed to my application.  I expect that if I had a memory leak which committed memory would slowly creep upward. If I need extra RAM in this PC or adding RAM will increase just enough time between errors?

  My system specs are as follows:

  Dell Optiplex XE Intel Core 2 Duo CPU 3 GHz / 2 GB RAM running Windows 7 Professional 32-bit

  LabVIEW 2010 SP1

  Any help would be appreciated.

  Kind regards

  Rob

  Dear Rob,

  Same problem, I was faced with one of my applications.

  Give some delay in your writing RT TCP loop. RAM is fine no problem with your RAM. If you connect to your data file, you found after some time, you get some unwanted characters on the TCP/IP Protocol these unwanted characters increase your data to read size. So to avoid this gives some delay in your cRIO TCP send loop.

• Facing problem after completing an operation taking a lot of time to stop running vi.

  Hello

  I am facing a problem that after having completed an operation of its many take the time to stop the vi.

  Means when an operation are in fact that its application and save the file after you have saved the file vi should be stopped but before he stops time consuming and then its judgment.

  And I put that when user open vi Sound already functioning.

  Please guide me how can I fix this problem

  Thank you much in advance.

  It would be possible to have some problem with the system because I've done a new structure for the same program and even if I get the same problem.

  Now, I try to reduce the repeat function and making vi smooth.

  Thank you very much.

• Not enough memory is available to complete this operation

  Hi I have a problem with reading the data of Access database. If I want to analyze a product these datas on 6 months, for example, I got the message error "not enough memory is available to complete this operation"

  The line of code that makes this error is

  "aValues = RecordSet.GetRows (-1, 0, aColumnNames).

  I have 1 GB of RAM on my PC but I also tried on PC with 2 GB of RAM it does not help.

  Is this a problem with the Microsoft MDAC? I work with Win XP SP3 and MDAC 2.81 SP1.

  I have no idea more wa could be the reason...

  Someone has an idea or the same problem?

  Best regards

  Hi Suttema,

  I would like to try a request for Recordset buffered, instead of asking all records at once.  See if this example helps.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• sound recorder, no not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.

  I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do

  Hi superconfused123,

  This problem occurs because of a design limitation in the tape recorder.

  You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• could save bitmap for computer - not enough memory or resources to complete the operation.

  Save the bitmap for computer... always achievable by this message:

  There is not enough memory or resources to complete the operation. Close some programs and try again.
  .. was even trying to record on a blank disc of flash 8Gb and still does not work... Please help

  Hi Janey,

  ·         Do you get the error when you use MS Paint application?

  Check to see if the following is useful.

  Method 1: Perform a disk cleanup and then try to save the image.

  Description of the tool in Windows XP disk cleanup

  Method 2: Log a user account different to check the issue. If you do not have any user account then the create and check for the issue. Report of the results.

• Error in the painting: "there is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Original title: new resource error in painting, whenever I try to close the file or select all content

  (Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:

  "There is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?

  Hi ebjeebee,
   
  This problem can occur for the following reasons:

  • If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
  • If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
  To resolve this issue, use the appropriate method:
  • If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
  • If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:

  a. open an existing bitmap.

  b. in the Image menu, click attributes.

  c. click on default and then click OK.

  d. on the file menu, click Save as and save the bitmap with a new name.

  e. close and restart Paint.

• "Not enough space to complete the operation"

  Hello

  I use
  Windows Vista Edition Home Premium
  32 bit
  Service Pack 2
  Compaq :D

  When I started my computer. I noticed that the volume icon had a small red cross. And the network thing too. So when I right click on the volume bar. It has 3 options: playback devices, recorders and sounds. When you hold your mouse on the icon it says "Audio Service has not started". When you place your mouse over the network icon it will say "not enough memory to complete the operation.

  When I go to services, I see that Windows Audio is not enabled. When I click right properties. He said its on automatic. That when I press start, it also says: "not enough memory to complete the operation".

  When I check the system.
  It says CPU: not available
  RAM: Not available
  Usually, he'd RAM: 2.00 GB (or something like that, but I'm sure it was 2 GB)

  For any help or suggestion would be nice. I searched a lot on Google but couldn't find answers that work.

  Thank you
  Daoping (not my real name)

  Thanks for the reply anyway but,

  Until I received this message. I reformatted my computer.

  Thank you.

• The data necessary to complete this operation are not available at this time. (Exception from HRESULT: 0x8000000A)

  Original title: visual studio

  I had this problem

  The data necessary to complete this operation are not available at this time. (Exception from HRESULT: 0x8000000A)

  Hello

  If you get the error while trying to compile the program using Visual studio, we ask post you your request in the forum for better support.

  Visual studio Forum

  Hope this information helps.

• MS Paint build upwards: not enough memory or resources to complete the operation

  I call this iguana impressive in the painting and I wanted to color. I decided to go for a black and white look and configured settings and chose the black and white, to give me the white instead of color.
  I zoomed to 300% zoom, white selected as color 1 and the third from the right in the second row color 2. Then, I selected the Eraser tool and started colouring the white background on the iguana by using the right button of the mouse.
  I tried several times and each time after about 30-60 seconds MS paint show me this message:

  There is not enough memory or resources to complete the operation.
  Close some programs and try again.

  When this happened, I checked the task manager that I couldn't understand something like that was the case. Apparently, I was using only about 60% of my 2 GB of memory, mspaint.exe using somewhere between 9,000 - 14,000 K according to the Task Manager.

  I tried to open a new mspaint and redo the same thing as above designated: zoom 300%, black and white, Eraser, white as color 1, which other than 2 colors right click, paint using the eraser: after some time, same result.

  What is going on?

  I use an Eeebox EB1012 with 2 GB of RAM, double heart Intel Atom 330, Win7 (naturally)

  EDIT: If this is not clear enough: ms paint would not react after the above mentioned message was posted and I had to end the process using Task Manager.

  Hi DrenchedIguana,
   
  
  Let us try the following workaround and check if this helps us solve this problem.
   
  Method 1.
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Let us, make sure that all instances of MS Paint are closed before performing the following operations:
  1. click on start, run, type regedit, and click OK to start Registry Editor.
  2. navigate to this key
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Paint
  and remove the key from the paint.
  3. exit the registry editor and restart the computer.
  4. start the paint to see if your problem has been resolved.
   
  Method 2.
  If the problem persists then I recommend that you create a new user account and check if the problem exists. If the problem is resolved in the new user account, I advise you to fix the corrupted user profile.
  Difficulty of a corrupted user profile 
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Permissions insufficient to complete the operation after a clean installation of Adobe Bridge in Win7 Pro

  Three installed days ago Adobe photography CC bundle, which includes Photoshop CC, CC LR and bridge. I've never had this software on my computer before. I am running Win7 Pro with all updates installed. I'm on a single computer, only user with administrative rights.

  I wanted to use the extended features of the bridge to reorganize my D about 30,000 files raw drive photo library. I moved a folder to a new location without any problem. Unfortunately, now I am more able to move, copy, rename, or delete files in Bridge after moving only one folder. I got the message that I had insufficient administrative rights to complete the operation. I have administrative rights. Why could I offers a folder but not others?

  I tried to rename, move files with Windows Explorer, but got the message: you need administrator rights to complete this operation. I clicked on the button continue and the operation is complete.

  I spent two days several hours the Webchat and nearly five hours on the phone with Adobe support technology. We found in the 'Hidden' administrator I can complete all the actions file/folder without problem. However, I can not yet perform the same operations in my original user account, and I repeat, with administrative rights! This has been verified to the DOS prompt.

  Adobe technology had me reset the permissions in the folder Adobe Advanced Security/owner of the tabs, but nothing helped. I can not yet use this expensive software due to problems of Windows permissions. Also note that the UAC is in its default settings. Windows warns far from reducing the lowest.

  I've scoured the Microsoft Windows website for answers and found no that relate to my situation/scenario.

  Help, please!

  The unknown account is referred to an account that you deleted from this machine. You must now seize the property of the D: drive, the new permissions recursively apply.

• Sent to-compressed file works only no error: "cannot complete the operation, access is denied."

  Original title: sent to-compressed file does not
  I'm on my laptop with Windows 7 home.

  Until today, I was able to compress files without problem.  I am the sole owner of the computer and have all the permissions.  I also went the folder I try to compress and checked the permissions it.  It happens on all records.
  When I click on send to - file compressed, I get an error message "Unable to complete the operation, access is denied."
  Thank you
  Holly

  Hello

  You can try the steps by Ramesh Srinivasan April 2. 2009 from the planned similar thread link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/compressedzippedfolder-in-SendTo-missing/bd060bea-5775-4b28-840C-96555f5ed289
   

• Hard drive receiving "there is not enough space available to complete this operation" in Windows 7

  Hello, I have install windows 7 upgrade from windows xp. My total hard drive is 500GB.but after installing windows 7, it shows 150 GB of disk space is not allocated. I tried disc managemaent IE right click on "Unallocated disk 150 GB" then volume.then simple new format then on next-next and then finish... and it displays error   "there is not enough space available to complete this operation".n haa, I did a system restore in windows xp. Since the pc went slowly & with money problems... But it does not work.

  Therefore, I installed windows 7 holding the pc faster. I think the restoration of the system to occupy this disk 150 GB space.so is show unallocated.

  Please, be sure to this my problem. Tell me how to keep back my total 500 GB... Give me an appropriate solution.   I will thanxful to you.

  Kind regards

  Pranjal

  * original title - 150 GB hard drive is unallocated.showing "there not enough space available to complete this operation" _ *.

  Hi pranjal1,

  Please see article with other useful information:

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think