My A30 Satellite stops on its own

Since the last 3-4 days my laptop, toshiba satellite A30, just stopped automatically. I noticed that maybe it's overheating is because I can hear the fan moving at high speed.
Can anyone help?

Hi Vijay,

It seems that if you have a problem with dust blocks the heatsink from the CPU. This causes the symptoms you describe.

You can try to remove the dust through the suction fan grids using a domestic vacuum cleaner or if you prefer, you can remove the plastic cover near the fan grids and then remove the heat sink to clear debris.

You can find several topics in this forum about overheating.

HTH

Tags: Toshiba

Similar Questions

  • Satellite M40 stop under its own

    My bodyguard M40 stop under its own - according to the operating instructions is due to internal heat is too high - y at - it something I can do to fix this problem?

    Hey Kimbo

    In my opinion this closure downs are related to bad cooling.
    You should check the modules of cooling because of the dust and debris inside the laptop. It seems that the fan don't twist with maximum performance and, consequently, the critical level of temperature increases.

    The use of the vacuum cleaner against the vents should help. But be careful.
    If you n t know how to do or you don t have much experience you should ask a technician for help.

  • Windows 7 stops on its own without warning

    My pc running windows 7 Home premium keeps stopping on its own without warning - I checked and its not overheating there are a lot of ventilation. I was told that it may be registry settings but don't see why I should pay for a reg cleaner because I do not know if it will solve this problem

    A Reg cleaner will cause more problems than it will fix. If the PC stops while using it, then see the test below tools. If it stops while his idle then you will need to check and change your power plan.

    First try running Memtest86 +, that runs from a floppy disk or CD and should eliminate or
    confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Device drivers: have you installed latest drivers from device of the manufacture of the motherboard? Visit their site to support for the latest drivers as the CD that came with the motherboard may have older less stable drivers.

    Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    Discover also Nvidia 'Smoke' test or equivalent ATI.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    Prime 95:
    http://www.Mersenne.org/freesoft/
    It's a stand alone .exe file contained in an archive .zip.
    Simply choose to run the 'stress test' option for 3 hours or more.
    If your PC can pass this test, your memory and CPU
    are very good (close the housing cover in order to maintain adequate ventilation)

    Core Temp:
    The temperature of each core of the processor.
    For overclockers using stock Intel/AMD radiator and cooling fan
    You can expect temperatures of 35 to 40 ° C in idle and 60 to 65 c max when running Prime95
    http://www.alcpu.com/CoreTemp/

    CPU ID (CPUZ):
    Watch the clock speed of the CPU under various conditions of loading
    (when using speed step technology Intel EIST).
    Also has two tabs (memory and SPD) that indicates the actual speed of the memory
    and 'SPD' tab displays the nominal speeds for each memory location that is filled.
    http://www.CPUID.com/cpuz.php

    Hard drive test - CD Bootable:
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
    For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
    Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Dell Dimension E521 starts and stops on its own at random times... a lot of attempts to repair/restore without success! What's next!

    Well, it's a bit of a long story, so I'll try to make it as short and easy as possible.

    My grandmother had the Dell Dimension E521 for some time in December of ' 06.  She had filled the C: drive with a bunch of junk and mandated the bureau with many useless shortcuts.  Later in November 10, she told me he had begun to stop and start on his own time at random, so I tried to do what I could with antivirus scan (AVG Free Edition), remove applications and unnecessary programs and try to demand for system recovery short.  While that makes the computer run faster, it still started and closed on itself.  His house has only the dial-up connection (which is almost impossible to update anything), so I brought it to my house for the best connection around 01/01/11 (9 days ago).

    I could update the AVG Free Edition and Windows updates, and it found and cleared, a Trojan Virus.  The Dell still started and shut down on its own.  My next step was to use the disc re - install for Vista Home Basic 32-bit.  He old programs saved in a folder "Windows.old" on the C: drive and completely re-installed everything back to the original.  After I checked in the "Windows.old" folder and recorded something she didn't lose (such as images and videos), I deleted as much as I could out of it.  The only thing I could not remove from it was 4 'driver files '.  For a while the computer trying to run 'chkdsk' on its own seizure began, but froze in the middle of it.  He finally ended the 'chkdsk' once and didn't try again since.  It downloaded and installed updates Windows of 100 or more on its own as well.

    After all, it still does the same thing he has with housing starts and shut downs.  The closure of downs occur not just in the middle of the execution of a given program; they occur at any time at random, even if I use the computer in safe mode.  She always goes through the whole stops the process with the "logging off" and "closing" legends, it is not as if the electric system is down.  The start-up occur randomly as well, even if a stop is purposely through the Start Menu or hold down the power button.  Sometimes, he's trying to start and shut down on its own several times without fully load.

    Again, sorry this is so long, but I would like to know if there is anything that can be done to get this thing to CUT IT OUT because my grandmother wants as his computer back!

    Well, it's a bit of a long story, so I'll try to make it as short and easy as possible.

    My grandmother had the Dell Dimension E521 for some time in December of ' 06.  She had filled the C: drive with a bunch of junk and mandated the bureau with many useless shortcuts.  Later in November 10, she told me he had begun to stop and start on his own time at random, so I tried to do what I could with antivirus scan (AVG Free Edition), remove applications and unnecessary programs and try to demand for system recovery short.  While that makes the computer run faster, it still started and closed on itself.  His house has only the dial-up connection (which is almost impossible to update anything), so I brought it to my house for the best connection around 01/01/11 (9 days ago).

    I could update the AVG Free Edition and Windows updates, and it found and cleared, a Trojan Virus.  The Dell still started and shut down on its own.  My next step was to use the disc re - install for Vista Home Basic 32-bit.  He old programs saved in a folder "Windows.old" on the C: drive and completely re-installed everything back to the original.  After I checked in the "Windows.old" folder and recorded something she didn't lose (such as images and videos), I deleted as much as I could out of it.  The only thing I could not remove from it was 4 'driver files '.  For a while the computer trying to run 'chkdsk' on its own seizure began, but froze in the middle of it.  He finally ended the 'chkdsk' once and didn't try again since.  It downloaded and installed updates Windows of 100 or more on its own as well.

    After all, it still does the same thing he has with housing starts and shut downs.  The closure of downs occur not just in the middle of the execution of a given program; they occur at any time at random, even if I use the computer in safe mode.  She always goes through the whole stops the process with the "logging off" and "closing" legends, it is not as if the electric system is down.  The start-up occur randomly as well, even if a stop is purposely through the Start Menu or hold down the power button.  Sometimes, he's trying to start and shut down on its own several times without fully load.

    Again, sorry this is so long, but I would like to know if there is anything that can be done to get this thing to CUT IT OUT because my grandmother wants as his computer back!

    Hey tkkcc70

    Here's how to remove the windows.old folder in vista as well as windows 7 after you have saved the data of it

    http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

    read the information below, to see if you can run dell diagnostics by pressing F12 at startup to try to find the problem

    http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

    Walter, the time zone traveller

  • need to cut pc where it is plugged it said pc saving settings and then that is it does not stop on its own

    PC does not close down on its own necessary to use the band switch am new to all this what happened?

    Hello Brenda,.

    Often we see shutdown problems as the result of a program from loading at startup.

    To solve these, we use the clean boot troubleshooting.

    The following describes this process on Windows XP:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    The following article describes this process in Windows Vista and Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  • my laptop stops on its own

    recently, I downloaded some games from mostfun.com and everything was perfect for about a week, then my computer just started blocking down on its own and incidentally I don't get error down and all just poof, he's going he first flicker a small last thing so far it's just when I know im running one of the games or a movie I downloaded the logical thing in East to remove these i I want to just make sure that its not something else

    It seems that the laptop may be overheating.  Are you sure there is enough air past for laptop?  Make sure that it is on a flat surface, with nothing to obstruct the ventilation openings.  Make sure that the vents and fans and heat sinks are free from dust - examine their blowing with compressed air (power of the system first, of course).  Depending on the laptop model, it may be relatively easy to blow off the dust with compressed air, or otherwise clean up things a bit.   Fans should be kept up well - only no right turn when being ripped off.  My Dell laptop has a removable fan (two small screws need to be removed) that can easily be blown.  This also allows access to the fins of the heatsink.

    Some laptops also have a removable filter that traps the dust and must be regularly inspected and cleaned.

    Are all the BIOS settings for the adjustment of the temperature, the value lower than the manufacturer's recommendations and the default values (you need to check the manual of your laptop for this).  Also make sure you run the latest version of BIOS (again, the manual of your laptop would have the details; the manufacturer's website should also have this information).

  • Computer guard stop on its own. NVIDIA Graphics Driver has stopped working.

    When I click to find the problem and the solution he tells me to update the driver. I searched a driver update and couldn't find one.

    Signature of the problem:

    Problem Event Name: BlueScreen, OS Version:6.0.6002.2.2.0.768.3, Locale ID: 1033. Additional info on the problem: BCCode: 116, BCP1: 858F0510 BCP2: B 8, 213650, BCP3: 00000000 BCP4: 00000002, OS Version: 6_0_6002, Service Pack: 2_0 product: 768_1.

    I had this problem on my computer stop when not in use for about a week. I did a system restore and it did not work.

    Can someone help me please!  :-)

    Hello

    This Bug_Check is 'almost' always drivers, so check first with the Nvidia support, their drivers online.
    and ask in their forums known issues. To update or re-install video drivers and makes
    not help, then use the troubleshooter below.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    ----------------------------------------------------------------------------------------------------------------

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ------------------------------------------------------------

    References to Vista also apply to Windows 7.

    Have you updated your screen/video or other large recent drivers - check in Control Panel.
    Updates of Windows to see if a driver has been loaded it. Use this generic utility below
    and when you get to the section driver use the methods in the next message and then back to
    the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
    cause this error.

    Also check with the support of system Maker and video/display of the map because he could be called
    questions - also check in their forums.

    BCCode: 116 0 x 00000116

    Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
    to reset the display driver and recover a time-out has failed.

    BCCode: 116 0 x 00000116<-- read="" this="">
    * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

    --------------------------------------------------------------------------------

    The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
    special meaning (other than pilot caused bluescreens occur with some frequency).

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • computer stops on its own

    my computer goes to a blue screen that stops. I have not installed new hardware. What could materialize this project?

    Hello

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Vista stops on its own

    Vista stops periodically restarts with the message, do not turn your computer off, 1 of 3, etc.  What needs to be fixed?

    Hello

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

    How to do a startup repair in Vista and Windows 7
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the system - Vista Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    This tells you how to access the system - Windows 7 Recovery Options
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to do a system restore in Vista and Windows 7
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a disk of Vista or Windows 7.

    Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
    x 64 64-bit.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • BlackBerry Z10 my new Z10 camera stops on its own

    I just bought a new Z10. the problem with the device it stops suddenly and I have to restart. PL let know how can it be resolved?

    Well known problem, but the good news is it seems to have been sorted with the new OS update soon.  I use the following work around: when I wake up in the morning I do a restart.  This seems to satisfy for the better part of the day.  If go out during the night, for a restart.  Now, I'm on T - Mo usa which seems to have little impact.

  • No changes but my screen goes black and computer stops on its own

    This has just begun. Screen goes black and the computer shuts down. Is also off sometimes when I try to wake him up.

    Hello Mary LouJoseph,.

    Click the link for the who might help with your problem of black screen.
    This is whyis my screen black when I start Windows 7?

    Let us know if that helps.

    Marilyn

  • Screen ACL in Windows 7 towers / turns off in 1 or 2 minutes on its own

    Strange problem started recently. My computer laptop LCD screen turns off in 1 or 2 minutes on its own even to power cable. I checked and have already reset all power plans, but the screen seems to stop on its own. I was not able to understand the problem.

    Also changes to the power management has no effect on this behavior. For example if I increase the delay before the screen stops at 10 minutes (with or without battery) it always closes the screen in 1 or 2 minutes

    Can you please suggest what could be the problem.

    I have an Intel Core 2 duo processor - x 64-HP DV4t laptop

    Thank you

    Varun

    Varun

    Hi Varun,

    ·        This happens to you while you use a particular program or are the random problem?

    I think it is a hardware problem and you may need to contact the manufacturer of the laptop computer for further assistance.

    In addition, uninstall any software of management of power given by the manufacturer and check.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • During the execution of that Microsoft Security Essentials scan, computer stops at this own topic.

    Original title: computer stops on its own

    Companions of the IO,

    I have a notebook Acer Aspire with Windows 7 Home Premium. When I run the full scan of MSE, the computer shuts down on its own after a while. It's actually like a stop forced down, even if the battery is almost full and the laptop is plugged. When I turn it on it shows that ' Windows did not shut down correctly...» ».

    Any ideas what type of problem could be?

    Thanks for the complete information. The problem is resolved. There is nothing with the computer. The voltage of electricity was actually too high and the power supply just blocked power supply check to protect the computer to burn.

  • Satellite A30-213 - stops after loading Internet pages

    My satellite A30 213 stops almost everytime, when I enter a website with a lot of uploadings. The machine rotates in about a minute or two and closed its doors. I know that my RAM is only 256 KB. Is that why and in this case, what can I do about it?

    Best regards
    Janne

    Hello

    It is not easy to give a correct answer, but the fact is that 256 MB of RAM for using Windows XP Home edition is really not much. I do not know what A30 you have exactly, but some of them can be upgraded up to 2 GB of RAM.

    RAM modules are not more expensive and I recommend you to upgrade to 1 GB minimum. After this the laptop will have a lot more resources and will go much faster.

  • Why my iPad did stop recording a video on its own?

    I recorded a video with my iPad and stop recording on its own.  Why did do that? I just make a video days earlier that was longer without problem.

    feeling very frustrated right now.

    Have you run out of storage space?

Maybe you are looking for

  • Re: Software pre-installed Satellite T110 - is not functioning

    Hello I have a new Satellite T110/00D. (Windows 7) In the words of commissioning, he was fine but since won't laod any software that was on board. MS Office works (I downloaded), but internet explore etc opens. The files are on a search for the disc.

  • towers of micro?

    I ordered this pc, before noticing it is said microtower. Is what do I have to worry about the size of the case generates a lot of heat? my last pc the a6720y went belly up to a lot of heat, but then this motherboard has a history. no game or movie w

  • How to increase code efficiency in a while loop (using PXI5105 for sampling outside signal digitalizer)

    Theoretically, we want the PXI-5105 (digitizer) have 302 record with each record has a 1260 sample (the save operation is inside a while loop) in approximately 30ms, however we have found that for each period (30ms), the PXI5105 only perform about 10

  • Error code 80070002 update

    Need help to get my updates to run. Get the Code 80070002. Will not update. Windows Vista 64. Need detailed instructions for correct. Tried to not restore, no chance. I read some of the post on this problem. Still nothing works. Thank you

  • Dell XPS 13 flickering of the screen (9350)

    Just got the XPS 13 (9350) last week and I had a few intermittent black screen flicker that occurs normally in short bursts of 4-5 short black outs in a period of two or three seconds. Technical support updated all drivers and others, but I always fe