Composite dependency at the start of the server problem

Similar Questions

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• is "is there a connection with the server problem", in El Capitan

  Hi guys,.

  I've tried to sort myself but up to now no joy... :-(

  I'm under El Capitan on a MacBook and for weeks I need to install a specific program through CDROM connected with my old Mac Mini (Tiger) via my WiFi use it as a hard drive external.

  Everything worked fine, but then I get this annoying message "there was a problem connecting to the server...". »

  So far on:

  1. the service of Mac Mini is not listed in the connection points

  2. the Mac mini is no longer connected to my network

  It seems that this message has something to do with my iCloud service, I tried to unplug and deletion and fixed but as soon as I have reactivated iCloud began to burst once again.

  Any suggestion?

  Thank you

  Sebastiano

  Have you tried to remove the software that you have installed as instructed by the developer?

• Connection to the server problem

  Hello

  on opening my creative cloud, it takes an update and the wont let me access Photoshop or my other apps. So when I tried to update the system, he said there is a link to the server error and there is nothing wrong with the internet connection.

  Can someone help me in this situation that I really need to use these programs?

  Thank you

  Hello

  This link may help: solve common problems of activation and deactivation of creative cloud.

  Kind regards

  Sheena

• Can not find the server/problem loading page

  I've made a few changes to a CFC that caused it not to compile. When I tried to access my web application it gave me the error as planned CF, pointing to my invalid code. I commented on the service out and reloaded my app. When I tried to view it in the browser, I'm greeted by an error can not find the server. What disturbs me is that I am able to access other web applications without an error cannot find the server in the browser. Does anyone know why an application would cause an error of cannot find the server and not others? I hope this is clear :) Any help would be greatly appreciated.

  Apparently I WASN'T looking to another web application, but a prototype html that the browser displays because he had no tags CF. The problem is that somehow the CF Server service was not working. It works... problem solved.

• Signature of the server problem?

  Is there a problem with the signature servers. My apps worked very well until I quit them just in the last hour... now, they give a sure aPi exception whenever I try to run them. The signature tool says that the app has been signed...

  Not aware of everything... next weekend, Yes.

  See note sticky at the top of this section that your thread is validated.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=24310

• Problem in sending HTTP request on the server.

  Hello
  I have dveloped a script ant for deployment of the sar.
  
  I have deployed an endangered species to my server local soa with ant script. He has successfully deployed me...
  but when I try to deploy it to a remote server, get the below error...
  "The problem by sending the HTTP request on the server. Please make sure that the server is in place or check the code of standard HTTP response for a 404 "
  
  but the server is up and runnig and I am able to ping my machine and also access the console...
  
  Here's my script
  
  
  Build.Properties
  ------------------------------------------------------
  
  WN.bea.Home=C:/Oracle/middleware
  All.needed.Jars.Path=D:/Sourcecode/neededJAR
  Oracle.SOA.Home=C:/Oracle/middleware/Oracle_SOA1
  Java.Passed.Home=C:/Oracle/middleware/jdk160_24
  
  #Deployment environment
  Deployment.plan.Environment = dev
  
  #Deploy action
  deployAction = redeploy
  
  #credentials
  user = weblogic
  password = BIENVENUE1
  
  #For Composite deployment
  serverURL = http://10.177.154.6:7001
  forceDefault = true
  Server = 10.177.154.6
  port = 7001
  sarLocation = D: / code source/JAR
  
  
  Build.Xml
  ------------------------------------------------------
  
  <? XML version = "1.0" encoding = "iso-8859-1? >
  < project default = "soaDeployAll" name = "deployAll" >
  < echo > basedir ${basedir} < / echo >
  < environment property = "env" / >
  < echo > classes folder ${basedir} < / echo >
  < file="${basedir}/build.properties"/ property >
  "< taskdef resource="net/sf/antcontrib/antlib.xml ">
  < classpath >
  < pathelement location="${all.needed.jars.path}/ant-contrib.jar"/ >
  < / classpath >
  < / taskdef >
  < target name = "init" >
  < tstamp >
  < form property = "timestamp" reason = "yyyy-MM-dd_HH-mm-ss" / >
  < / tstamp >
  < name = "build.log.dir property" location ="${basedir} / buildlogs" / > "
  < dir="${build.log.dir}"/ mkdir > < property name = "build.log.filename" value = "build_$ {timestamp} .log" / > "
  {< record name="${build.log.dir}/${build.log.filename}" loglevel = "verbose" append = "false" / > ".
  < echo message = "Build connected to ${build.log.filename}"/ > "
  < / target >
  
  < target name = "deployAll" depends = "init" >
  < echo > deploy environment ${deployment.plan.environment} < / echo >
  
  < antcall target = "deployAllComposites" / >
  
  < / target >
  
  <! - the following Actions are performed for Composite files to the server run - deploy, redeploy - >
  < target name = "deployAllComposites" depends = "init" >
  < foreach target = "deployComposites" param = "File" >
  < fileset dir casesensitive = "${sarLocation}" = "no" includes = "*.jar" / >
  < / foreach >
  < / target >
  
  < target name = "deployComposites" depends = "init" >
  < file basename property = "${file}" = "basename" / >
  deploy < echo > ${name} of the environment project $ {deployment.plan.environment} < / echo >
  < if >
  < equals arg1 arg2 = "${deployAction}" = "deploy" / >
  < do >
  < echo message = "deployment of composites in Managed server...". "/ >
  "< antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml ant "inheritAll ="true"target ="deploy">
  < property name = "ServerUri" value = "${ServerURI}" / >
  < property name = "user" value = "${user}" / >
  < property name = "password" value = "${password}" / >
  < property name = "overwrite" value = "false" / >
  < property name = "forceDefault" value = "${forceDefault}" / >
  < property name = "sarLocation" value = "${sarLocation} / ${basename}" / >
  
  < / Ant >
  < / may >
  < other >
  < echo message = "redeployment of composites in Managed server...". "/ >
  "< antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml ant "inheritAll ="true"target ="deploy">
  < property name = "ServerUri" value = "${ServerURI}" / >
  < property name = "user" value = "${user}" / >
  < property name = "password" value = "${password}" / >
  < property name = "overwrite" value = "true" / >
  < property name = "forceDefault" value = "${forceDefault}" / >
  < property name = "sarLocation" value = "${sarLocation} / ${basename}" / >
  < / Ant >
  < / else >
  < /if >
  < / target >
  < / project >
  
  
  
  Help, please...

  Hello

  Give the serverURL as http://:/ soa-infra/deployer and try.

  for example. http://10.177.154.6:8001 / soa-infra/Deployer

  Kind regards
  Neeraj Sehgal

• Shared folder of the server become unreachable. Event logs is not useful. No relevant newspaper found.

  Hello world

  Here's the scenario:

  Shared folder of the server became unreachable. Try to access via UNC (name or IP), but failed. Server is pings and accessible via RDP. Server service is started. I can telnet port 445. The Windows Firewall is disabled.

  OS: Windows Server 2008 R2 SP1 Standard

  Restarting the server problem.

  Need your help on this issue. The question met twice last August 08 and 28. Event logs is not useful. No relevant newspaper found.

  Thanks in advance.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Server problem?  Cannot access our rooms to the United Kingdom

  We are unable to access one of our Acrobat Connect Pro rooms to the United Kingdom.  Simply, we get a blue bar hanging saying 'sign in' whatever the location, browser, pc etc etc.  Not even through iPad can access us.  Since at 0850 am hour British.

  Also, we cannot access recorded sessions, but we can get into our dashboard general Adobe Connect.

  Cannot access the content downloaded in our shared content. Once you click on the URL for it, it freezes / or shows no connection.

  Can anyone help?  Trying to contact the Support of Adobe Connect is a hideous job.

  Matt

  PS: It's interesting because I'm writing a presentation I'm doing for the eLearning Show Thursday, which is run by learning UK & Performance Institute.  I wonder what I will eventually talk...

  The server problem has been identified and fixed. The system is stable now. Let us know if you encounter any problem.

  We apologize for the inconvenience.

  Thank you

  Ashwani

  Acrobat Connect Pro Support Team

• R12.2.4 cloning - failed to start the server, run oacore_server1 / oafm_server1

  Hi people,

  I am cloning EBS R12.2.4 for the first time. Database is in read/write mode. After clone then managed fs1. But while I was trying to services to run two services named (oacore_server1 and oafm_server1) not upward before clone, and ended with the error:

  ERROR: Could not start the managed server oacore_server1

  ERROR: Could not start the managed server oafm_server1

  Later, I tried to them manually, but the same results as the previous. I paste the details from the journal of oafm_server1.

  
  

  [Journal of the applmgr@abcddb] $ cat adoafmctl.txt

  07/26/15-00: 51:20: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  26/07/01-15: 07:57: admanagedsrvctl.sh: exit status 1

  ================================================================================

  26/07/01-15: 19:04: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  26/07/01-15: 20:48: admanagedsrvctl.sh: exit with status 0

  ================================================================================

  26/07/01-15: 21:12: admanagedsrvctl.sh version 120.14.12020000.10

  Call txkChkEBSDependecies.pl to make the dependency checks for oafm_server1

  Perl txkChkEBSDependecies.pl script has run successfully

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  
  

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  07/26/15-12: 49:18: admanagedsrvctl.sh: exit status 1

  ================================================================================

  Kind regards

  Ali

  Ali and Sandeep, follow these steps:

  starting at $ perl admanagedsrvctl.sh oafm_server1 - Dweblogic.security.allowCryptoJDefaultJCEVerification = true

  ARO

• How to start a job using DBMS_SCHEDULER depending on the result of other JOBS

  How to start a job using DBMS_SCHEDULER depending on the result of other JOBS

  For example I have two jobs A and B of EMPLOYMENT, I would like to start JOB B only when a JOB is complete, is an option like that?

  Hello

  Yes, you can create a channel with the Scheduler, see the documentation:

  Creation and management of channels of employment

  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/scheduse.htm#ADMIN10021

• Composites Show "Status pending" after you restart the server

  Hi team,
  
  I'll call a composite to composite one another, using the WSDL url. Whenever any rebound server happens to be composites of parent are going to pending status and shows error'SOA infrastructure is not loaded for this composite. Error getting entry flow XML < WSDL url goes here > '
  
  I had found this article on the web.
  https://blogs.Oracle.com/AIA/entry/aia_11g_best_practices_for_dec
  Followed the steps. Although my problem persists. Any help would be greatly appreciated.
  
  -Sainaba

  You must reference it the WSDL other composites of MDS instead of use the WSDL url.
  Here are the steps I used to do.
  1. go to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps" (where C:\Oracle\Middleware is the path where you install your jdeveloper in your machine)
  2. create a 'lib', 'lib\wsdl', 'lib\xsd' files in the previous path
  3. get the HelloWorld composite (example) WSDL url. Put it in the browser and save it locally as ".wsdl" (i.e. HelloWorld.wsdl) in the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\wsdl".
  4 copy the xsd (say HelloWorld.xsd), which is used in the project HelloWorld to the composite file and copy to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\xsd". Make sure you copy all the xsd (s) dependent as well.
  5. open the file previously saved '.wsdl', change the with something like that.
  oramds:/apps/lib/WSDL/HelloWorld.wsdl*.
  6. change the value of the 'schemaLocation' to ' * oramds:/apps/lib/xsd/HelloWorld.xsd* '. "Also, make sure that there is no place where it refers to the URL of the SOA server except to the.
  7. open JDeveloper, create the base of SOA MDS file
  8. navigate to the file composite.xml, where he called for HelloWorld.
  9. double-click on the reference "HelloWorld" and will return the wsdl for the local mds.
  * 10. Go to the source of the composite.xml view and change the location of the binding of the service reference "HelloWorld" BLAH oramds to real composite wsdl URL
  11 deploy the MDS (all files in your lib folder) artifacts at MDS of your server. It is the key step before the composite can be deployed on the server. You can use the ant script or you can use the jdev project to do that (we used the ant script).
  12. now your process can be deployed on the server with any problem. Also, you can repeat as many times as you want and you shouldn't see any problem. (granted, all processes update with this approach to reference the wsdl for reference of mds file)

  * Step 10 is not necessary for everyone. I have maintained a separate of the MDS for different environment version. Thus, each environment has correct endpoint in the MDS. We don't have to use the deployment configuration plan when promoting different environment. If you don't want to do, you need to change the location of the binding in the composite.xml or change as well as the plan of the config.

  HTH
  Hruthayah

  Published by: h_kumari on 27 Sep, 2012 13:43

• InDesign Server CS6 / Windows 7 Professional 64 bit: could not start the server

  Hello

  I develop plug-ins for Indesign Server CS6.

  Now, I would like to install Indesign Server CS6 on my PC with Windows 7 prof 64-bit Developer. But do not start the server.

  The message "the Application could not start correctly (0xc000007b). Click OK to close the application. "is displayed.

  -Is it possible to install the server on Windows 7 prof 64 bit?

  -If not how can I debug my plugin?

  -A work around?

  Thanks for the help.

  Kind regards

  Hans

  IESHIMS.dll indicates a problem on my system, but my msvcr100.dll seems good.

  I sent you a private message with the output of my depends on for IDS.exe (InDesignServer.dwi) you can load and compare with your own case.

  Concerning

  Caerwyn

  PS. apparently I can only attach images and videos. If you want to the CFA, send me a PM with your email and I'll send it by e-mail.

• When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

  Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

  See this support article - difficulty of problems connecting to websites after Firefox update

• After the Server 5.1 update, no service will start or even report status

  I got this server remotely, via the command line.  On-site, the customer applies all recent Apple server improvements and the OS in an attempt to solve some problems of slowness that turned out be connected to the router.  There is no upgrade remains to apply.  After these improvements, I can't even the status of all services.  Here is an example:

  Server: ~ user$ sudo serveradmin fullstatus calendar

  Calendar: error = < 62706c 69 73743030 d4010203 04050618 19582476 65727369 6f6e5824 6f626a65 63747359 24617263 68697665 72542474 6f701200 0186a0a4 07081112 55246e75 6c6cd409 0a0b0c0d 0e0f1056 4e53436f 64655a4e 53557365 72496e66 6f584e53 446f6d61 696e5624 636c 6173 73100180 00800280 035f1014 636f6d2e 6170706c 652e7365 72766572 6 d 677264 d2131415 165a 2463 6 c 617373 6e616d65 5824636c 61737365 73574e53 4572726f 72a 21517 584e534f 626a 6563 745f100f 4e534b65 79656441 72636869 766572d 1 1a1b5472 6f6f7480 0108111a 232d 3237 3c424b52 5d666d6f 7173758c 919ca5ad b0b9cbce d3000000 00000000 01000000 00000001 000000 00000000 00000000 00000000 d5 1 c >

  Calendar: errorDescription = "the operation could not be completed. (error 1 com.apple.servermgrd.) »

  Calendar: errorCode = 1

  If I try to start, stop or fullstatus for the calendar or any other service, I get the exact same message.  I rebooted the machine, which doesn't change anything.  The server logs are completely empty after the date of the upgrade from.  If I ask him just to list the services via the 'serveradmin' list, it returns a list, so serveradmin itself is not fully watered.

  Where should I go from here?

  I had to go on site to this server.  It turns out that the part of the upgrade process should be to the GUI - it can not be opened from the CLI.  I therefore started by server, let him finish the upgrade, because this worked and went home.  Is not ideal, but at least it works now.