Computer crash (screen goes black after start)

Similar Questions

• Satellite 3000 - X 4: screen goes black after start

  Hello

  I have a laptop of s3000 - x 4 satellite.

  swiched top upward start then the screen goes black, I can just do the display to see loading, windows
  This happens even if I can get it to boot in safe mode, or when I enter setup.
  If I'm lucky, I have a minute of commissioning until the display changes. and as soon as I restart, I'm square.

  can anyone help? If it is a component, it is easy to find and replace?
  see you soon

  Colin

  Hello

  Have you tried to connect the external display?
  If this is not the case, try it. Also check out the switching between display devices with the FN + F5 key combination
  If this does not help, I would pick up the laptop with the Toshiba Recovery CD supplied. Also try to improve the shape of the Tosh site graphics driver.

  But if it won't work and you can't see anything on the screen so I guess there must be something wrong with the hardware. In this case only the ASP in your country is able to help you.

• a sound signal and the screen goes black after start

  Hi, I have a problem with my HP G62 a38se laptop pc.when I start my pc after startup pc saying not to answer with 3 beep sound(beep...beep...beep).after it displays a black screen and goes restart... plsss help me for this

  You are able to access UEFI to perform material tests?

  Perform the start-up and testing of the long system. Please post your results here.

  Kind regards

  ERICO

• Screen goes black after start

  2 #1 monitor displays a normal "office" and then turns black 5 to 20 seconds after turning upward.  Sometimes displays 'no signal' on the way to black.  Power Off then on restores it for another 5 to 20 seconds.  Discount to zero has the same effect

  This config double montor was working before?

  In the resolution of the screen, the monitors can be detected?

  Swap monitor connections on the PC, the same monitor fails then?

  Check that all are watching them (removing and reinstalling) cable connections

  And or check the monitor on another PC

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• Screen goes black after the log on screen and works fine in safe mode.

  Original title: black screen.

  dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!

  Hi Avint,

  Glad to know that you were able to resolve the issue and thank you for sharing information.

• While watching Netflix my screen goes black after a few minutes

  E-mail address is removed from the privacy *.
  While watching Netflix, my screen goes black after a few minutes. It's something new. How can I increase the time before that happens, or eliminate entirely?
  Thank you for your help.
  Sincerely,
  Byron Johnston

  Hi Byron,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems while watching Netflix your screen becomes dark. I'll be happy to help you with this problem.

  (1) how you try to access Netflix?

  (2) you use Internet Explorer to access the Web from Netflix site?

  (3) you receive an error message?

  (4) is the issue limited to a Web site or with other sites as well?

  (5) have you made changes on the computer before this problem?

  Method 1: I suggest to turn off the screen saver and check if that helps.

  Enable or disable the screen saver

  http://Windows.Microsoft.com/en-us/Windows7/turn-your-screen-saver-on-or-off

  Method 2: If the problem persists, I suggest you to contact Netflix support for assistance.

  http://www.Netflix.com/help

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Screen goes black after 15 minutes?

  Hello

  I plugged my Compaq 420 on my HD TV via a VGA cable.

  Now, I love watching videos of youtube on my HD TV.

  However, the screen goes black after about 15 minutes. So I have to move my mouse to bring up the screen again.

  I thought it was the standby screen so I changed the setting to 60 minutes, but still the screen goes black after 15 minutes of watching the video.

  If I move the mouse whenever a whilte (entry reachs 15 minutes) the screen becomes black ever so I move the mouse every time some time when I look at something more than the 15 minutes. but I don't want to get up from the couch every 10 minutes so please help change me the setting so that the screen is not black.

  In Control Panel > options, click choose when turn off the displayof power "on the left side of the screen and changing the settings Never to"on battery"and"Plugged in"

  

• HP ProBook s 4540: the screen goes black after the mode "Eve"

  Hello!

  My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

  I have disabled all parameters almostly, screenshots here:

  #1- http://i.imgur.com/zelMPLD.png

  #2- http://i.imgur.com/FJNyLzi.png

  I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

  Kind regards

  DP - K

• Screen goes black after the connection to the laptop.

  The login screen appears and I can connect.  Then it takes a long time for the computer to think, but it never goes to my office.  The screen goes black.  I did Control + Alt + Delete to close and turn off the computer.  It's a laptop and I had trouble with the electrical cord were staying not 'on '.  I don't do social networks, or open unsolited E mails.  Is there a function key which will solve this problem?

  {t is a laptop and I had trouble with the electrical cord were staying not 'on'.}

  The above should explain more on your part.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP 2000 laptop screen goes black after entering the password

  After I enter password screen goes black

  Ok. I'm in the menu boot options. I have Manager ser of the OS startup. ERIC file boot. It says press F10 for BIOS Setup options, ESC to get out. What should I do?

• Acer S241HL screen goes black after the release of the games, reboot the pc.

  Whenever I go out or alt + esc out a game, the screen goes black, but his continued to play, it forces me to restart the pc. the thing is, it didn't happen until I bought my new monitor, my old monitor is an HP w2207h and my new monitor is an Acer S241HL Cbid. I don't think there is anything wrong with my pc, because it didn't happen with my old monitor.

  This happens only to some games well. (Counter Strike: Global Offensive and crew)

  Any help would be appreciated strongy.

  I FOUND THE FIX.

  This is a really weird problem, I had tried before but this time he just decide to work. I plugged the HDMI cable between the pc and return to the pc when I got a black screen. Surprisingly it worked, as I had already tried before. I tried several times now and it works.

• IdeaPad S500 Touch - screen goes black after driver update

  I have a Lenovo IdeaPad S500 Touch. It is running the latest update of Windows 8.1. He proposed an update of the video driver from Lenovo. After downloading and installing the update, the screen went black. When the computer reboots, the Lenovo logo appears on the screen, and it goes black again. No matter what I try, that's all.

  Does anyone have a suggestion?

  Thank you

  James

  Hi Scoutmaster316,

  Welcome to the Community Forums of Lenovo!

  You will need to restart the system in safe mode.

  There is the only option to boot your situation is down to the system startup

  When you turn on the system, Lenovo Logo appears then black screen maybe wait a minute hold it the power button down until the accident it you must reapeat this 4-5 times until it starts to a page like this

  

  Once you have got to follow these choices that

  Troubleshooting / Advanced Option / start parameters

  Then you should rerach options with, select Safe mode which.

  If the driver is the problem, you should be able to start here,

  Open the Device Manager and rollback video driver

  Concerning

  Solid Cruver