Computer does not load Windows. (Missing\corrupt file and the disk read error)

Similar Questions

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Computer does not load Windows after reset after installing HP-J6413

  Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

  Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

  Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

  Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

• Samsung laptop computer does not load windows 7, need to reinstall (no cd, no cd key)

  Samsung laptop comes with windows 7, does not load past the bottom (and even in this case, does not load the user/pw. Need to reinstall how? It did not come with a cd key and I tried to go back to the last good config and it did not work (im going with a file corrupt and need a cd key). He gets in the background, but is not past. I want to just reinstall windows 7 home 64 bit, but I miss a cd and don't know how to get the cd or the cd key for it.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Samsung, press F4 to the power upward...

  You will probably find the product key in the compartment to batteries.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• computer does not load windows xp

  computer will not load in windows sometimes happens at startup repair but still does not work
  Pentium 4

  judged fault dust stop start thank you for your suggestions

• A startup problem after that Windows updates were installed and a disk read error occurred.

  I have a laptop Dell Inspiron 9400

  Windows Vista Home Premium SP2 operating systems

  Last night, he showed 16 updates are ready to be installed the automatic updates.

  So I clicked to install the updates as I always do.  I have everything done exactly the same thing.  When updates

  have been made install prompted me to restart now for the updates to take effect.  I have clickedd the button

  Restart now and he acted like he was going to reboot except is went to a blue screen with a message that says:

  A disk read error has occurred.

  Press Ctrl + Alt + Delete to restart

  I tried several times by pushing the Ctrl + alt + del keys to restart my system, it does not start...

  It shows the DELL screen with the loading bar, which is in charge of the left to the right.  It then displays

  Back to the blue screen with the same Message (an office read error)...

  I tried once or twice as the system restart in Mode safe mode (F8)...   This doesn't work anymore...

  He always flashes back to the BLUE SCREEN with the same message.

  Please, can someone tell me why this would happen as a result of the windows updates...?

  How this can be fixed or what should I do to get my back operational system?

  Thank you...

  Shelly928

  Hi Shelly928,

  You can read the following article and try the steps to solve the problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.

• Computer does not load Windows 7

  Hello

  I was using my computer hp laptop pavilion dv6 and then he got a blue screen with white text (I think the HDD problem, idk)

  I restarted the computer and my computer was not able to load my Windows 7 operating system. I already tried safe mode, I tried the repair option. The computer tried to fix for 7 hours without any result. I already tried reseting with Windows recovery disc, didn't work... Solution?

  (Sorry for English, English is not my main language.)

  WSEOIT wrote:

  Hello

  I was using my computer hp laptop pavilion dv6 and then he got a blue screen with white text (I think the HDD problem, idk)

  I restarted the computer and my computer was not able to load my Windows 7 operating system. I already tried safe mode, I tried the repair option. The computer tried to fix for 7 hours without any result. I already tried reseting with Windows recovery disc, didn't work... Solution?

  (Sorry for English, English is not my main language.)

  Hello

  Well, it seems that the defective material only could be the hard drive. Perhaps it is too damaged a lot to make it work again. Get a new hard drive I guess. You got recovery discs so that there will be no problem to do work again.

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• "Computer does not allocate a drive designation letter and is not displayed when windows Explorer opens to USB external drive.

  Original title: problem connecting to USB external drive

  I tried to install a 30 GB drive to Fireball over using a disk enclosure external hard Octigen SATA-USB 2.0 on an Acer Aspire T671 under Vista Premium computer. The system recorded new material, installs drivers and registers an entry on the massive safe removal as a "USB storage device" icon However, the computer does not allocate a drive designation letter and does not show the opening of windows Explorer.

  The hard disk is configured as a master, as described in the user manual.

  How can I make the computer recognize the drive and assign a drive letter?

  Thank you for the help

  Frank Hughes

  Hi FAH300,

  If you are not able to format the drive, there may be a hardware problem.

  I suggest formatting the disk using the instructions linked by wb2001.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  Hello

  You tell us what type of license you have.

  If the former was preinstalled, NO, you cannot transfer it.

  Read this information:

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  See you soon.

• Install the updates for installation of Creative Cloud Packager, Mac education.  Package of CCP update returns an error.  CCP does not load.  Where can I download the latest CCP?

  Hey all:

  Created and deployed a CC 2014 package to our iMac Apple OS 10.9.5

  The package is now obsolete and workstations cannot install updates.

  I tried to create a package update with Adobe Creative packer of cloud, but the update package is not installed.

  I try to create a new package of Creative Cloud 2014 with all updates but does not load CCP.

  CCP returns the error "Oops, something has gone wrong, please try again."

  CCP downloaded from my LWS gives me the same error.

  Where can I download the latest version of the CCP?

  I have install Adobe Creative Cloud 2014 via the package can configure us the desktop computer to update from the internet?

  If so, how?

  Thank you.

  WIN

  http://www.Adobe.com/go/ccp_installer_win

  MAC

  http://www.Adobe.com/go/ccp_installer_osx

  It is likely that the ports are closed that the CCP needs to talk to our servers.

  Please refer to this page8s). You will find information about the deployment and packaging of CC:

  Creative Cloud for businesses

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash

  Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors

  Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe

  Thank you so much,.

  Johnny 777777

• I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I work on a Mac computer

  Hi Tania,.

  He could be induced to Mac username and password.

  Kind regards

  Sheena