Computer does not load Windows 7

Similar Questions

• Computer does not load Windows after reset after installing HP-J6413

  Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

  Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

  Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

  Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

• computer does not load windows xp

  computer will not load in windows sometimes happens at startup repair but still does not work
  Pentium 4

  judged fault dust stop start thank you for your suggestions

• Computer does not load Windows. (Missing\corrupt file and the disk read error)

  I woke up this morning and my computer screen said:

  "Read a disk error has occurred."
  Press Ctrl + Alt + Delete to restart»

  So I did, and he just keeps it again and again. I turned off my PC, disconnected from the power and took out the battery. EXPECTED, put everything back in and turned on the computer. This time he made a lot of strange beeping noises and took forever and then I got this error:

  "Windows was not start because the following file is missing or damaged:
  \SYSTEM32\NTOSKRNL.exe
  Please reinstall a copy of the above file.

  I pressed on enter and it gave me the error reading disc again.

  Yesterday I updated my BIOS. So I also tried to go to my BIOS screen and "Load factory default settings", but I always get errors that I said just above and windows does not load.

  Help =)

  Hello I would wait until you try to do the repair first

  Make sure that the hd is just a notebook size hd
  Make sure that the speed is the same thing that you already size is really for you
  before you start to have a complete set of installation discs for the mfgr
  If you only use the os disk you will not load the microsoft embedded key encode any additional programs the mfgr installed or modified specially for your computer model and the party in the form of hard disk, you will need to do it yourself the format should be identical to the new factory
  uninstall all the equipment installed after you bought the computer (you must add once installation is complete)

• Samsung laptop computer does not load windows 7, need to reinstall (no cd, no cd key)

  Samsung laptop comes with windows 7, does not load past the bottom (and even in this case, does not load the user/pw. Need to reinstall how? It did not come with a cd key and I tried to go back to the last good config and it did not work (im going with a file corrupt and need a cd key). He gets in the background, but is not past. I want to just reinstall windows 7 home 64 bit, but I miss a cd and don't know how to get the cd or the cd key for it.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Samsung, press F4 to the power upward...

  You will probably find the product key in the compartment to batteries.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  Hello

  You tell us what type of license you have.

  If the former was preinstalled, NO, you cannot transfer it.

  Read this information:

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  See you soon.

• Desktop computer does not load correctly

  We can no longer switch uses profiles without having to reprocess the computer because the Office does not load correctly.  When we switch between profiles of uses without reformulate the computer, we get an error message indicating that "your office is not load correctly... loaded in safe mode.

  This start happening a few weeks ago.  This problem occurs every time that we move from user profiles or log out, and then move the user profiles.  We have to reprocess the computer on the desk in order to load successfully.

  All that we can do to fix this?

  If this problem was not more than 15 days ago, and if you remember the date when you did not have this problem, please do a system restore. Choose the date when there was no problem that your restore date.
  If this does not work, please do a check of the filesystem (sfc/scannow)

  Procedures for system restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done

  File system (sfc/scannow) check how to:
  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  t-4-2

• Re: Satellite L670D does not load windows

  Hi, I have a toshiba L670D, who recently had a windows update and since then, every time I try to turn it on will not load windows, but just comes up with the error "error fatal c0000034 application update operation 207 0f 102311 (_00000...)"

  Is there anyway I can fix it myself or is it a case of calling an expert or even go shopping for a new?

  Try to start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool.

  Please post comments.

• Satellite L300 - portable computer does not load

  Hello

  I just wanted to know roughly how much it should cost, or what can I do to fix my laptop. It does not load and I bought a new charger to see if it works but it started to load for a few days and then stopped working again.

  All responses will be apperciated, thank you.

  Hi DeeDee_1,

  If you have already bought a new charger and it doesn t work there seems to be a motherboard problem, but another part could be affected too

  Here he s just a user to user forum and nobody can tell you how much it would cost because a professional diagnosis is necessary. After that an authorized service provider can make you an offer on all repair costs.

  Then contact the guy and ask for help. They can give you a good answer ;)

• Help, please! computer HP laptop g72 does not load windows

  I can't get my laptop to initialize. I was it clean and running virus/spyware scans when it overheated and judgment (something he seems to do more in more often lately), I came back to the room to check on it and he stopped. He gave me the usual message about how he had disappeared in hibernation because the internal temperature exceeded blah blah blah (don't remember exactly what he said, but it wasn't the basics of it) now normally at this stage it will restart and be well and I can continue with what I was doing before. However this time it will not go beyond the second screen. It's what he does... (I will include the information in the end system)

  I press the power button then screen shows the following

  1 HP screen of the logo with the message "Press ESC for Boot Menu" at the bottom left then flashes to the next screen.

  2. starting Acronis Loader...
  Press F11 for Acronis Startup Recovery Manager... (horizontal cursor flashing after...) then flashes to view the first screen again

  and this process is repeated again and again until I got disabling or press ESC to #1 screen or F11 to the screen #2 how it will load either the menu start screen where I can access info sys diagnotics, BIOS or system recovery system.  or Acronis where I can make backup dics or start the Recovery Manager (who I'm trying to deal with the system if that is possible at this time because there are pictures and things on the hard drive that I want not deleted if it can be avoided)

  the process is normal to start but after #2 it should be blank with blinking cursor and then begin loading windows... I cannot at this point. He repeates just the first two times, I let it run for about 10 minutes at a time to see if she would do anything else, and it won't.

  System info-

  portable mode: HP G72 notebook PC (not sure what particular model because I don't know where to find this info)

  System ID: 1425

  Product number: LE846UA #ABA

  Warranty start date: 27/03/2013

  BIOS date: 08/11/2010

  BIOS version: F.26

  Processor type: Intel Pentium CPU [email protected]

  Processor speed: 1866 MHz

  Operating system: Windows 7 premium 64-bit

  I bought this computer used. The battery has never held a charge, I've always had it up to use it, but I don't know if I had to buy a new battery it would probably work. I never had the money to make and never really needed it so never bought.

  I tried to access the BIOS and it requires system administrator password. I tried to enter my password that I used to connect to windows, but that did not work. After 3 tries I have a message to disable the system with [6207076] below.

  Is there someone who can help me to fix it?

  I really don't want System recover unless there is a way to access the LIBRARY (documents, music, pictures) if I can help it. I don't have the ability to transfer all of my photos from my other computer before that happened.

  Please help me!

  Hello

  The code below should allow you access the bios menu:

  76165078

  Once, I would like to delete the password entirely - use the arrow keys to select the Security tab and press ENTER.  Use the arrow keys again to select the admin password option and press ENTER.  Enter the current password (use the above code), and then for the new password, just leave this blank and press on enter – do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Once completed, boot into the bios menu and reset the default settings - it may also be useful running a quick diagnostic on the HARD disk and the memory that is to be found under the Advanced or the diagnosis tab.

  Kind regards

  DP - K

• computer does not load before the windows loading screen.

  Hi basically I was watching a movie on my windows XP computer and it is essentially closed without warning.
  I tried to restart, but it wouldn't restart after loading with the blue bar screen.

  I tried to load in safe mode and it wont. I tried all the safe mode options you.
  I tried the last good config network still does not start.

  I also tried debug mode
  its not working do not and I really need all my things that are on the computer.
  I don't have a windows disc I bought this second hand about a year ago so any help would be thank you very much.
  Thanks in advance
  also, if anyone knows a way to fix this without an email from disk or reformatting windows me plz

  Jellybabyboosh,
  You should check with the manufacturer of PC for the recovery disc's different installation options.  You may be able to proceed to a repair facility and not lose anything. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I turn on my HP Pavilion dv7-1245DX Turion 64 windows vista computer does not load

  My laptop is a HP Pavillion DV7 1245 DX/Turion 64 bit running Windows Vista. When I turn on my laptop, the fans run, the lights are on, but windows only is not loading. I left on for a few hours and windows not loading always not. I would like to know if there is a way to solve this problem. My laptop is not quite 3 years old.

  Thank you
  Cori827

  Hello

  When you turn on the power, you do not get the HP Splash Screen Logo?

  The screen remains completely black?

  If so, you have a hardware problem.

  If under warranty, contact HP.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Satellite L750 - 17 p does not load Windows

  Hi all... I have a Toshiba Satellite L750 - 17 p, since a few days now, when I turn on the PC after the toshiba logo I get the loading screen and the window ms back with the inscription: system32 / drvload.exe
  MS-DOS screen remains empty and the computer doesn't load... could you help me?

  Are able to repair the system using the Windows own repair options?
  I guess you are using Win 7 because this system has been pre-installed by Toshiba.
  Switch on and press F8. Here, you choose the first option called fix my computer.
  Now you should be able to choose between several options. I think you should try the first option that allows you to automatically repair the system.

  If this option does not help, try to set the system on the last good configuration/status running

• My computer does not load past the Bios Dell screen

  Vista 32 bit Home Premium on Vostro 200
  Hey, my name is Christian and this is my problem:

  It all started last night when I (stupidly) decided I should change my screen windows open, you know, black screen, where the green bar would float through from left to right while the computer responsible. I decided to change to a sort of landscape of Lake, but this is not the point.
  Before that, I chose at the next restart, the registry would be defragged and there would be controls memory.
  I am so down and restart the computer.
  Computer turns on and I the landscape to the instead, loading screen unless it's just a picture, so there is not move bar telling me whether or not the computer was loading.
  And the screen just wouldn't change. I assumed that defragments the registry and memory check took place, but I was rather paranoid about whether or not something is going on I turned manually the computer off hold the button down.
  I turned it back again and he went to the same - screen landscape and would not pass as usual. Paranoia took ahold of me and I turned it off once again. I did it a couple of times (and I apologize) until a system repair came automatically.
  I thought it was my way out of this problem, but it didn't really fix anything, and the screen landscape had changed now in a black screen which seems to have a background image screen to vista aurora discoloration in the Center.
  And it's right now. It does not seem to go beyond that and I think now that it was all due to the change in the loading screens.

  I even left on overnight assuming the scans took place and it would be frozen until the tests were performed.
  Nothing has changed.

  I tried the obvious; safe mode does not work exactly. I click on it and all I get is the names of the drivers being loaded then a very slow black line through every driver leading one by one.

  Unfortunately, I deleted the backups of my restore system checks an hour before this happened and I did a lot of memory by pressing F8 and choose the option.

  I'd even do a factory reset as long as I've had all my files and drivers on a hard drive.

  I don't know what to do, I am completely distraught. Any advice would be helpful and thanks in advance!
  (a factory reset would be VERY VERY last resort)

  Christian.

  Hello

  as safe mode does not do a start-up repair disc

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If it does not here's how to save your data

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed!

  and how to reinstall vista

  using dell dvd

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  using the dell recovery partition

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966