Trying to do a simple REST, the security token error installation

Similar Questions

• Calling REST API security token error simple GET method

  Please help me get past this error. I have yet to get a successful REST API request of Eloqua. API is enabled for our sandbox that I managed by instantiating different SOAP request/response.

  This is my test RequestURI

  https://secure.Eloqua.com/API/rest/2.0/data/contact/3

  With the method 'GET' headers appropriate and what I have collected of their API guides, including the very useful

  Eloqua REST API - authentication

  Eloqua REST API - URL parameters

  Eloqua REST API - HTTP request headers

  RequestURI works when typed manually into a authenticated (connected to the Eloqua Sandbox session) tab of the FireFox browser.

  When I try the request in my tools (middleware Tibco integration, acting as a client HTTP request), I always get the answer:

  A security token that is associated with your session became invalid.

  I saw this topic, but this was not useful in my case.

  http://topliners.Eloqua.com/message/20371#20371

  The behavior in my case is pretty consistent, and seems not to care if I even spoil RequestURI making it invalid. The same error persists.

  Help, please! Thank you

  Heath

  A more complete answer follows:

  < RequestActivityOutput >

  < header > HTTP/1.1 200 OK

  Content-Type: text/html; charset = utf-8

  Content-Length: 2355

  Date: Friday, April 19, 2013 19:43:19 GMT

  cache-control: private

  connection: close

  P3P: CP = "IDC DSP COR DEVa TAIa OUR PHY ONL UNI COM NAV CNT STA BUS."

  < / header >

  < statusLine >

  < httpVersion > HTTP/1.1 < / httpVersion >

  < statusCode 200 > < / statusCode >

  < reasonPhrase > OK < / reasonPhrase >

  < / statusLine >

  ....

  A security token that is associated with your session became invalid.

  This can happen if you open multiple instances of Eloqua, in

  different browser Windows or tabs, then the diary of one of

  These instances.  Please either close this window or tab, or

  & lt; a href = "" / FormsLogin.aspx "target ="_top"> click here to connect to new & lt;" /a >. & lt; br >

  Heath,

  I'm not able to simply navigate to this URL in my browser either, even though I am connected to my sandbox (which has access to the API). I don't know how you manage to get there in Firefox.

  That being said, I can hit this page of the REST API very well when I base64 encode my credentials HTTP as described here:

  Eloqua REST API - authentication

  May be useful to take a look at the auth string you use when calling from rest.

  Jim

• Web Service on JCS13.2: InvalidSecurityToken: the security token is not valid.

  Hello

  I deployed a web service with security @SecurityPolicy (uri = "oracle/wss_username_token_over_ssl_service_policy") policy.  The WSDL file seems

  But when I test with SOAPUI and JDeveloper HTTP Analyzer, it always, up InvalidSecurityToken: the security token is not valid.

  The Web Service code is as below,

  Import javax.jws.WebMethod;

  Import javax.jws.WebService;

  Import weblogic.wsee.jws.jaxws.owsm.SecurityPolicies;

  Import weblogic.wsee.jws.jaxws.owsm.SecurityPolicy;

  @WebService

  @SecurityPolicy (uri = "oracle/wss_username_token_over_ssl_service_policy")

  public class HelloWorld {}

  public HelloWorld() {

  Super();

  }

  @WebMethod

  public String sayHi (String name) {}

  Return "Hello" + name;

  }

  }

  What is the valid username and password for the web service deployed on JCS?  Any suggestion and assistance is very much appreciated.

  Looked into this a bit and I think that your problem can be caused by a time stamp missing security feature. Try something like:

  http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"xmlns:wsu ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">."

  username

  http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText "> pwd"

  http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-SOAP-message-security-1.0#base64Binary "> XtfCRwo4W3qo8DqryRpuwg =="

  2014-07 - 04T 10: 29:29.371Z

  2014-07 - 04T 10: 29:29.361Z

  2014-07 - 04T 10: 46:09.361Z

  It worked for me using the Soap UI request. So try to add the "wsu:Timestamp" element and pointed out that the value used must be within the tolerance between the client and the server so have a valid value, you have the tolerance depends on how the system is configured for configuration details, refer to . Advanced Administration. Based on tests of strength bully me into JCS his game somewhere about 480 seconds...

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• The security token cannot be authenticated to exposed SOAP BPEL process

  Hi all

  I have a BPEL process that I'm outlining like SOAP web service that conducting a policy of oracle/wss_username_token_over_ssl_service_policy . The BPEL process does nothing with the identifying information that is passed (in fact, I stripped everything out of him so that there is no anything). When I test the web service using soapUI I get the following error message: FailedAuthentication: the security token cannot be authenticated. Anyone have any ideas why?

  This is the payload sent to the service:

  " < = xmlns:bpel soapenv:Envelope ' http://xmlns.Oracle.com/TestBPEL/project/BPELProcess "xmlns:soapenv =" http://schemas.xmlsoap.org/soap/envelope/ ">

  < soapenv:Header >

  " < xmlns:wsse wsse: Security = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "xmlns:wsu =" " http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd "soapenv:mustUnderstand ="1"> "

  < wsu:Timestamp WSU: ID = "TS - 10" >

  < wsu: created > 2013 - 10 - 07T 21: 16:16Z < / wsu: created >

  < wsu: expires > 2013 - 10 - 07T 21: 16:48Z < / wsu: expires >

  < / wsu:Timestamp >

  < wsse: UsernameToken WSU: ID = "UsernameToken-9" >

  WJR < wsse:Username > < / wsse:Username >

  " < wsse:Password Type = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText "> CBA < / wsse:Password > .

  " < wsse:Nonce EncodingType =" http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-SOAP-message-security-1.0#base64Binary "> 2460zn8mTqCxdB6XS65Ixg == < / wsse:Nonce > .

  < wsu: created > 2013 - 10 - 07T 21: 16:16.577Z < / wsu: created >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  < bpel:process >

  " < = xmlns:bpel bpel:input ' http://xmlns.Oracle.com/TestBPEL/project/BPELProcess ">? < / bpel:input >

  < / bpel:process >

  < / soapenv:Body >

  < / soapenv:Envelope >

  Hi Bill,

  The message is pretty clear "FailedAuthentication: the security token cannot be authenticated. There should be something wrong with your security configuration... The fact that your code doesn't do anything with the credentials doesn't mean anything, as long as you have politics, you must pass a valid authentication...

  See you soon,.

  Vlad

• Trouble installing the 2011 E - tax to the ATO. Error "installation package could not be opened, contact the seller to check if this is a valid windows installer package".

  Trouble installing the 2011 E - tax of the ATO

  Error message "installation package could not be opened, contact the seller to check if this is a valid windows installer package."  Help!

  Hi there, do the right click Save target thing. And make sure u save it somewhere other than your desktop for example: my documents - for me, this has solved the problems

• I can't activate the automatic update in the Security Center error [error number: 0 x 80070424]

  I skipped to drag a screenshot here, but the message fails to send.
  Microsoft Fix it indicates one or more components of Windows Update is configured incorrectly. Non-fixed status.
  Windows XP Professional SP3 X 86 PC

  Regsvr32.exe c:\windows\system32\wuaueng.dll worked, I ran Malwarebytes and Spybot looks like I'm back OK now, fake red antivirus XP Internet Security or something like that is what I had to basically remove a bunch of pop-up trying to lure you in to send the money. Who owes automatic updates somehow disabled. Thank you

  You are welcome. However, I personally would not use or depend on SpyBot. Both scanners I have listed are, in my view, based on years of experience, the best. Good navigation!

• I received a pop up of the security violation error

  Hi, I got violent security pop up after having a 3 CleanMyMac, told me to call the + 61 2 6145 2088. I called it was music. then hung up because I wasn't sure if it was a joke to get my info. Please can someone help...

  Exactly, do the following:

  Click the Apple logo in the upper left corner.

  Click on force quit...

  Select Safariand select force quit

  Restart Safari, but this time, MAKE sure THAT YOU HOLD IN THE SHIFT KEY WHEN YOU click ON the SAFARI ICON!

  I hope that solves your problem.

  Best regards

  Austin

• I'm trying to uninstall Lexmark 2500 but the message: '% BuildTemplate error message%' appears.

  I can't uninstall Lexmark 2500 printer.    The % BuildTemplate error message% message arrives.   How can I uninstall this program?

  Hi VERONICAVOSE,

  If you have made any changes to the computer before the issue occurs?

  Method 1
  Run the fixit from following link:
  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2
  If the steps above fail, try the steps from the following link:
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

  Method 3
  You can also try the steps from the following link:
  http://support.Lexmark.com/index?ID=HO3518&locale=en&ProductCode=LEXMARK_X4650&segment=support&page=content&ACTP=HOTTIPS&UserLocale=FR

• XP installation fails the manifest parser error: installation fails in i386\asms\6000\msft\windows\common\controls\control.man on line 0

  Any ideas what this could be?  My laptop not start so I tried to reinstall XP Home Edition and received this message.  I reinstalled the XP several times before.  Recovery does not even recognize the drive and when I try to put it into safe mode of any type, it will stop and say he can't put in safe mode.  It would not come with last good configuration file either.  Installation went as far as formatting the disk, install some files and stops with this error during the installation phase.  I tried a Linux USB image to see if I could get to practice but it is not even appear as a disk.  I also tried a hard drive carrier to try to access with this laptop, but it would not recognize the drive and assign it a letter.  When I tried to map a drive to it, it would be dismissed saying hard disk is not accessible.  The tech Center says this could be because it is password protected.
  Any idea on how to get to that hard drive that seems impenetrable? Or does have a virus package root?
  Any help would be appreciated.  You can send me an email to * address email is removed from the privacy *.

  Thank you
  Gilbert

  Hello

  I suggest you to follow the steps in this article and check if it fhelps:

  http://support.Microsoft.com/kb/978788

  It will be useful.

• Download the Debug token error

  I try to install the token of debugging on my device. I've added as a Test device with the password WiFi IP address and device. I also created a debugging token. When I try to download to the device (when the appliance is in Mode Token Upload), it takes a long time and I get an error indicating that the download failed - connection refused.

  I checked the symbolic debug information and everything seems fine. I also tried to download the token via command line, but I still get connection failed.

  Any ideas?

  Nevermind, after three days of troubleshooting, I was able to install it. It was just a problem of network.

• Creation of the debugging token error: file has already been signed

  I nuked my PC and could not save my symbolic debugging Moose registration and got a new. I am registered with flash builder 4.6 but failed to create a new debugging token. Whenever I try (FB or from the command line) it gives me the error that the file has already been signed, regardless of what name I try to save it as. Someone has an idea what could be the cause?

  I was able to get the problem solved. Was I was using an older version of the SDK commands and again by specifying the location of the key store and let the necessary detection automatic settings worked.

• I get a 'Secure connection' error failed with google stating "certificate contains the same serial number.

  When I click on a link to a google search, I get the "Secure connection" error failed in Firefox. He says, "please contact the administrator of the server or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority."

  I followed the instructions here:
  https://support.Mozilla.org/en-us/KB/certificate%20contains%20The%20Same%20serial%20number%20As%20another%20certificate
  and looked at this article:
  https://support.Mozilla.org/en-us/questions/1028103?ESAB=a & As = AAQ

  I uninstalled and reinstalled Firefox, deleted the entire folder profiles and reset Firefox. I see that the older (orphans) article points to my router. However, I have a new router and have updated their software. There is no button to add an exception (as stated in the article), so I can't just work around it. This problem does not occur with IE, so I have a hard time to believe that it is my router.

  How to solve this problem? I really want to change browser.

  Finally, I tracked the issue. The answer was found here:
  https://support.Mozilla.org/en-us/questions/1028985

  It turns out that Avast has a web shield that passes through its own verification of certificate https. Of course, this feature is not quite right and loses track of the certificates. Disable "https scanning" in the settings of Avast resolved the problem.

• Security sandbox error

  How to avoid the security sandbox error
  
  I try to read the data of another site Web that is not my own
  
  I got this error:
  
  securityError no controlado: text = Error #2048: the Sandbox security breach: SMSinfo.swf cannot read http://jack.xtremdesign.net/SMSInfo/config.xml. " src="/webforums/forum/images/i/expressions/face-icon-small-confused.gif "border = '0' >

  The crossdomain file should go on the server serving the data whether you are difficult to access, not on your server.

  If this is not possible, then you must make this call from a server, instead of the Flex client. This is called using a proxy, and no, you can't just set this property on the dataservice tag.

  Google search for some pre-built proxy code.

  Tracy

• Add vNIC PortGroup scope with the REST API security group

  I created a security group within the reach of a PortGroup via the REST API. Now, I'm trying to add a vNIC, also via the REST API.

  To help illustrate, I have a JMTest1 VM with 1 vNIC connected to the PortGroup which is the scope of the security group. When I change this group the first item in the list that could be added to the security group is the first (and only) JMTest1 vNIC.

  

  To add it via the REST API, I need to provide the following:

  https://192.168.x.x/API/2.0/services/SecurityGroup/SecurityGroup-XX/members/ < member-moref >

  for example I need to understand what the < member-moref > for the vNIC to JMTest1 and this is what I have a problem with.

  If I add the vNIC through the user interface and then interrogate the security group it gives me below the answer:

  < securitygroup >

  < objectIdobjectId > securitygroup-xx < / objectId >

  < type >

  < typeName > SecurityGroup < / typeName >

  < / type >

  < name > JMTest7 < / name >

  < description / >

  < revision > 9 < / revision >

  < objectTypeName > SecurityGroup < / objectTypeName >

  < scope >

  < id > dvportgroup-xxxxx / < ID >

  < objectTypeName > DistributedVirtualPortgroup < / objectTypeName >

  < name > dv-xxxxx < / name >

  < / scope >

  < extendedAttributes / >

  < inheritanceAllowed > false < / inheritanceAllowed >

  < member >

  500758f6-b97b - 7A 79 - 0c < objectId > 04 - 996f53edf3f0.000 < / objectId >

  < type >

  Vnic < typeName > < / typeName >

  < / type >

  < name > JMTest1 - NIC 1 < / name >

  < revision > 6 < / revision >

  < objectTypeName > Vnic < / objectTypeName >

  < scope >

  < id > vm-xxxxx / < ID >

  < objectTypeName > VirtualMachine < / objectTypeName >

  < name > JMTest1 < / name >

  < / scope >

  < extendedAttributes / >

  < / member >

  < / securitygroup >

  It seems that the < member-moref > for the JMTest1 vNIC is < objectId > 500758f6-b97b - a 7, 79 - 0c 04 - 996f53edf3f0.000 < / objectId >

  If I run now:

  https://192.168.x.x/API/2.0/services/SecurityGroup/SecurityGroup-XX/members/500758f6-b97b-7a79-0c04-996f53edf3f0.000

  then the vNIC is successfully added to the security group. (yay!) So I am now left with the task of how to get

  500758f6-b97b - 7A 79 - 0c < objectId > 04 - 996f53edf3f0.000 < / objectId >

  of a vNIC?

  I have looked at the object in the Mob vCenter and via PowerCLI, but cannot see how to derive from it.

  Anyone know the answer to that?

  The uuid vnic is created by concatenating the vm instanceUuid + '. ' + the last three digits of the vnic device key.  (The vnic is located in the area of the config.hardware.device of the virtual machine and the key will be to shape 4xxx, where xxx represents the 3 numbers you need).

• Trying to access the electronic books in the library of our audience. Downloaded the software, but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.

  Trying to access the electronic books in the library of our audience. Downloaded the software, (Overdrive Media Console) but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.5.0.1. How to do only what I can read ebooks? People have suggested using IE, but I prefer to much HELP Firefox!

  Try to update the media player while using Internet Explorer. Windows Updates site uses ActiveX to perform "duties. Firefox does not support ActiveX.