computer does not receive a response from the wireless router

Similar Questions

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  It is one of the many problems that occur on my mac.

  Update of OS X El Capitan 10.11.4?

  1. backup Mac.

  2. install 10.11.4 combo update.

  https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• computer does not recognize a dvd in the drive

  Hello

  My computer does not recognize the presence of a dvd in one of my two drives, although she acknowledges a CD.  This happens regardless of what dvd I insert.

  Thank you very much

  PAM

  Try this;  Restart your computer before trying again the disc that plays on your DVD player.  If this does not work then there is only one possibility;  your DVD drive is DEAD and you need to replace it, or buy an external CD/DVD drive.    He comes to the end of the mystery.

• I received a message on my laptop computer that says not able to connect to the wireless router.

  I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.

  I think you have transcribed the number incorrectly.  I think that the article you want is this one: http://support.microsoft.com/kb/871122

• The battery of my computer does not load. I changed the battery and I changed the AC adapter, and I always get this message: "0% available (plugged in, not supported)" I don't know what the problem is.

  My computer the battery does not charge.  I bought a new battery and I changed the AC adapter but the battery still won't charge.  This is the message I get:
  0% available (plugged in, not charging) don't know why.

  Hello

  1. What is the number of brand and model of your computer?

  Let us try the steps mentioned below to see if the problem is resolved.

  Step 1:

  a. Click Start; type devmgmt.msc in the start search box and press ENTER.

  b. expand the batteries category.

  c. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
  WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.

  d. on the Device Manager, click Action and then click Scan for hardware changes.

  Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power. The notebook should now indicate that the battery is charging.

  Step 2:

  If this does not work, try power cycling of your laptop by following the steps below.

  a. remove the battery from your laptop, and then press the power button to all 15 sec.
  b. now connect to the battery and check if it works.

  I suggest also, please contact your computer manufacturer to see if they have any suggestions about it.

• Computer does not start, it goes into the repair system or start windows normally.

  I restarted my computer because my internet is blocked, and when he went straight to the windows repair. I chose 'Launch startup repair', but that just black flashed then went back to the same screen. So I chose to start windows normally, and restarted, it went back to the same thing. It retains, even in safe mode, etc. It's a Lenovo X 200 tablet, I got to the end of 2007.

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon

  Mick Murphy - Microsoft partner

• Flex app does not work when moved from the original location

  I'm doing a gallery of images in flex. It works when I run it in Flex Builder perfectly fine. Files html and swf works perfectly well open in any browser too, but ONLY when these files and all related files are open to the default location where the application has been generated in bin-debug folder. When I export a generation to another folder, the swf file loads but no other information from the display of the xml file. I tried to set all paths reference files (that is, the xml language) in the flex application to the absolute exact location on the server, and it did not work when I downloaded it on the server.

  I tried several approaches from scratch and they all arrive at the same question. I work with a teaching for Flex Builder License, I'm not sure if they jip you on those and ruin the compiled swf.

  Help, please! I'm losing my mind on that. I think it has to do with something else, in addition to the code because it works fine when I click 'Run', but if someone thinks it is helps for the zip code let me know.

  Often this is because you must add the - use-network = true compiler option in FlexBuilder menu bar:

  Project - Properties - Flex Compiler - additional compiler arguments:

  Add - use-network = true, and then recompile and post back to the server, should work fine.

  Note: If you create a "Release" version and move elsewhere on your local computer, you may need to add - use-network = true, and then recompile the application to access local resources outside the Flex Builder environment.

  If this post answers your question or assistance, please mark it as such.

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• the volume button on my computer does not work, when I turn the sound upward just bar falls to zero, no idea?

  can someone me, help the sound icon on the bottom of my scree of the computer doesn't work, when I puch the bar until you get sound on my computer, it just goes back to zero all the time...

  Hi JacquelineStueck,
   
   
  Parameter by default on your computer would be to reduce the volume when inbound communications are detected.
   
  a. change the setting in your control-> Sound-> Communications tab panel ' doing nothing '.
   
  b. click on apply. Click OK.
   
  If this does not help, perform the clean boot in order to identify the request at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Additional reference on:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Why Panel does not KeyBar 1.8 from the list toolbar?

  Remove knob remove not toolbar KeyBar 1.8 in Control Panel.

  Hi Frank,

  1. what happens when you try to uninstall the program?

  2. do you get an error message?

  3. are you able to work with the specific program?

  The list of currently installed programs in the Add / Remove Programs lists all compatible Windows programs that have a program Uninstall or feature. Sometimes, a program may not be removed completely, and remains the registry key that is used to display the program in the currently installed programs list. In this case, you may need to manually remove the program in the currently installed programs list in Add / Remove programs.

  You can try the Fixit and if it fails, you can proceed to method 2.

  Method 1:
  

  You can run the Fixit and follow the steps:

  Reference:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  a. click on "accept".
  b. Select 'detect problems and apply the patches for me.
  c. Select "Uninstall."

  d. Select the program from the list and try to uninstall it.

  Now search for the question.

  Method 2:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  KB322756 http://support.microsoft.com/kb/322756

  Hope this information helps. Response with status so that we can help you.

• "Your computer could not renew its address from the network (from the DHCP server) for the network card"?

  I saw this question posted several times here, but I can't find someone who has exactly the same problem I have.

  This problem started a week ago. Basically, my computer loses its connection ethernet once per hour to around the same exact time. which is only for about 5 seconds, but it's enough to get Skype and other things while I'm working, and it's very frustrating because I use Skype to talk with customers, and it looks unprofessional when my calls fall every single time. my computer can also use wireless (which does not go down), but he's too unstable for my work.

  now on the error message I posted. I get this error in my observer of events in about 30 minutes until my ethernet goes down, so I don't know if they are interlaced or not, because I don't get any errors when my ethernet really crashes.

  Here's what I've tried so far without success:

  -temporarily disable the firewall and antivirus

  -updated driver for both my wired network cards and wireless (both were UTD)

  I don't know what to do because I've never had this problem before.

  Here is some information on my computer if that helps all:

  OS: windows 7 Home premium (x 64-bit)

  computer model: gateway DX4870

  Look on the side of the router and make sure that the DHCP lease time has not set to 60 minutes.  As a simple solution you can just assign a reserved DHCP or a static address to the computer (in the router).

  PS: You'll find the DHCP lease on the map with the command ipconfig/all command at a command prompt

  John

• Why can I not get no response from the audio input jack? have you tried 4 different microphones in Final Cut Pro

  I have started working on FInal Cut Pro and have discovered that my audio Jack does not recognize any microphone that I plug.  I tried 4 different microphones up to now.   The input Attenuator is turned up 50% and beyond with no effect.   The entry just says "Audio" preferences pane: "Line input" with no other available device.  Am I missing something here?   He is 4 years old and this is the first time I tried audio input.

  The line-in input on a Mac requires an entry amplified, not a single entry.

  The headphone includes a contact mic. See:

  How to use the Apple earphones with remote and mic with your Mac - Apple Support

  You can also het USB mic input devices