Computer error memory, quit the programs, and then try again
Original title: Error Message
I get an error message saying: my computer is running on low memory and to exit other programs and try again, but I wouldn't open
I get an error message saying: my computer is running on low memory and to exit other programs and try again, but I wouldn't open
Prevention of problems of memory
Tags: Windows
Similar Questions
-
I am running Windows 7, 64 bit, home premium on a Dell Studio 1558 with an ATI Mobility Radeon HD4500-5100 graphics card and an Intel Core i3. It has 4 GB of RAM.
When I try to read files MTS using Windows Media Player I get the error message "your computer is low on memory. Quit other programs, and then try again,"even with no other programs running. Windows Media Player will play other types of video files without difficulty.
Any suggestions as to what can be the cause of the problem and how to fix?
TBH I'm not sure.
All I can say is on my desk, I have not loaded a pack of codecs only support of any kind and WMP12 plays my MTS files very well. Supported by this statement in Windows Media Player 12 is also capable of playing AVCHD formats (. ) M2ts et . MTS ). [13]" from - http://en.Wikipedia.org/wiki/Windows_Media_Player and the fact that
in WMP12 - "Media files (all types)" MTS has listed as an acceptable format. My office has an AMD/ATI HD5670, and like I said seems to play.
- Have you tried to run a full anti-recent virus scan? If this isn't the case, update your antivirus program and run a scan full to see if it finds problems.
- Then try a sfc/scannow scan to see if it detects and fixes something.
- Just checked, you have installed WMP12? (it should be, but just a double check).
This type of problem (or similar) has developed before items such as http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-and-low-memory-issues/bb4bf226-8bd0-41A5-9eed-9be08e6d3bdb and http://www.TomsHardware.co.UK/answers/ID-1699934/computer-running-low-memory-Windows-Media-Player.html and some people said re-register the DLL of WMP files helped. Personally, I've never needed to test or try this kind cannot confirm.
-
I'm having a problem running Halo: Combat Evolved on Windows Vista. I can insert the disc and install the game without problem. The problem is that when I try to launch the game, I get error message saying "" unload the debugger, and then try again." I tried to install some of Halo patches to see if that would fix the error (for example, 1.6 and 1.7), but when I try and open the patch .exe file I get an error message telling me to go to a microsoft Web site or try to update the game manually. In addition, I tried to contact Gearbox Software to see if they could help me, all they said was to contact Microsoft.
Does anyone have any suggestions as to why the game does not work for me and how can I make it work?
Let me know, thanks. :)
Hello whyohwhy42,
I suggest that you follow the section below. This includes various possible steps to solve this problem:
http://support.Microsoft.com/kb/812759
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: new resource error in painting, whenever I try to close the file or select all content
(Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:
"There is not enough memory or resources to complete the operation. Close some programs, and then try again. »
Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?
Hi ebjeebee,This problem can occur for the following reasons:- If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
- If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
To resolve this issue, use the appropriate method:- If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
- If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:
a. open an existing bitmap.
b. in the Image menu, click attributes.
c. click on default and then click OK.
d. on the file menu, click Save as and save the bitmap with a new name.
e. close and restart Paint.
-
Original title: problem ejecting USB Mass Storage Device
When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.
Hi a. Cook,
(1) how long have you been faced with this problem?
(2) is limited to any specific USB device?
This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.
Method 1:
(a) Download Process Explorer from the link below
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653
(b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.
(c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.
(d) find the process and its PID (process identifier) in the following box.
(e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.
(f) press Ctrl + H to display the handles in the view in the lower pane.
(g) find the file according to the drive letter and right click, choose Manage close.
Reference:
Problem ejecting USB mass storage device
http://support.Microsoft.com/kb/555665Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Method 2: You can see the steps in the link below by Diana d.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71Method 3: A scanner online for any threat and try to correct
-
Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. But all the content loads correctly, and it just seems to be an annoying error message. Does anyone know how I can get rid of this or that which is the cause. Site is: http://davidkimlaw.com
You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.
Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.
If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)
There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.
-
When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.
original title: RECEIVES the MESSAGE of ERROR WHILE SENDING AND RECEIVING PHOTOS
Hello Jane,.
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
Original title:
Windows Update
Hello
When I open the store windows I get an error saying
your PC is not connected to the internet. connect to the internet, and then try again
is there an internet setting before the update of win8 or one of the applications
Thank you
How to solve the problems of connection with Windows Update
http://Windows.Microsoft.com/en-us/Windows-8/how-solve-connection-problems-Windows-UpdateHow to troubleshoot problems connecting to Windows Update or Microsoft Update
http://Support2.Microsoft.com/kb/818018/en-AU -
I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. Art seems to be fine and the host site says it's probably coding error. What should I do?
Hello
Have you tried a few steps in the following article
"Some files on the server may be missing or incorrect" Warning Message
See if that helps. Let me know if you have any question.
-
"The drive where windows is installed is locked. Unlock the drive, and then try again. »
Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.
The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?
Hello Lara.
IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.
You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.
In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.
This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.
Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?
I'm sorry to hear you had to do this.
If you need to HP support, you must contact them directly to your country or region.
Contact HP-Assist phone USA | HP® official site
Contact HP worldwide | HP® official site
Good luck with the new computer.
Any brand or model you purchased now, don't forget to create the recovery disks/drive.
-
Hello I am trying to download my site www.novopro.co.uk screw "Publish to FTP" I have updated a page and downloaded from the website and now I get this warning on everypage. Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. If I click ok the site will load, but I get this error on everypage. I removed all widgets party 3 E, g, engines search, galleries etc.
I looked through the forum, but not seen no real solution to the issue, I looked at the 'Muse.assets' in the JSConsole and the only script to update is touchswipe.js I do not understand why its doing so, my host said there is no problems with the servers smd ive only uploaded the site (all files) several times.
My client is now a little inpatient as im yet to find a solution and I'd like to solve this problem as soon as possible. Please can someone help me shed light on the issue and im using the latest version of adobe Muse. Adobe Muse CC 2015.2.1
Thanks in advance.
In addition to what was suggested above, you can see if there are other solutions in this doc "some files on the server may be missing or incorrect" Warning Message that can help you and let us know?
-
When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.
Hi Colin,
Please try to reinstall the creative cloud after disabling antivirus and firewall.
Reference: error download or update Adobe Creative Cloud applications
Concerning
Megha Rawat
-
Help! I've just updated my Web site for the first time since the upgrade to the new version of Muse. All files are transferred successfully using Filezilla on my server but I get this error message on all browsers: some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.
Web site: 2020artgallery.com
Hello
Check this thread some files on the server may be missing or incorrect
-
It seems to happen whenever a update of Muse coming...
I'll transfer my site and when I visit it I get this message even that was supposed to be resolved there are a few versions:
"Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »
I use the latest version of Muse: 2014.3 release
I looked at my list of assets within the Muse - nothing is marked not linked.
I tried to upload my site many times... within the Muse and with FileZilla.
Fortunately, I have saved the latest version of my site - which was created in the version prior to 2014.3 - and downloaded again. It works and can be seen here: www.snapscene.ca.
But as soon as I make all the changes file of Muse, save it under a different name (to be compatible with 2014.3) and upload it - I get the message when visiting the site.
What gives?
-Adrian
It seemed to me the solution.
When I export the files, I simply left Muse overwrite the files in the destination folder. The files may not overeritten correctly.
Manually, I went into this folder destination and destroyed all the old files exported.
I then re-exported the files and then uploaded. All workes from there.
-
Deleting a folder gives this message: check the location of the elements, and then try again
I would like to help to get rid of a file. The folder used to hold pictures, but is now empty. I tried the normal removal methods. I also tried to remove prompt all to nothing does not. I tried to use Fileassassin, but it will not work with a folder and also Fileboss time to rename it to 8.3 and remove it but neither work. He will agree to be cut and pasted from images of office etc but will not delete in these two places. Similarly, it can be placed in another folder but still will not remove. Move a file inside does not either.
Suggestions welcomed!
Check if you have full permissions in the folder and also owner if necessary. Move the folder to your desktop. Right-click on the folder, and then click Properties, click the Security tab. Add your username in their own right. Click Advanced and add your username in its own right to the section of special permissions. And then click the property tab and make you the owner. In all three cases, remember to check the box to apply it to all files and subdirectories. That should give you the permission to delete the file. If this is not the case, check all the tabs property, including safety to check that nothing is checked to refuse the removal. The following should help you with this:
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
If this does not work, tryUnlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml that removes folders and files and can work where other programs have not.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
I couldn't finish the sentence. After the function, it should read "there is a reply button that sends an email and I get an automatic response from Andy Halford saying that he cannot help, addons have been removed for a long time"I do not appear to
-
Satellite C855-1TC - brightness and volume buttons do not work
I don't know what I did, but they no longer work. I tried to install the 'value added package' but it does not solve the problem, unless I did it wrong.This isn't a huge problem, but I have not missed them. Help please? I'm not very tech savvy, as we
-
I want to display my favorites on the left side of my google homepage
I can't understand how to display my favorites on my Google home page in Firefox. I don't have a light problem and using them in Explorer.You can me coach on how to display them in Firefox? Thank you.
-
Drag / drop from Explorer in my application
Hi people, I want to drag files or folders from Windows Explorer in a tree structure of my LabVIEW application. I have found no solution or for example (and I was not able to install the G-Toolbox, which is mentioned in some old forum boards). Does a
-
Uninstalled Acrobat Reader, problem still there. The system restore. Still no help. Is gone at the beginning-Online Admin Tools-online Service =>-online Start print spooler. But as soon as you click on "Add a printer", auto pc stopped print spooler