Computer format microtour 3400: PCI Simple Communications controller 3400 format microtour FRI ID = 8086 (Intel) DEV ID = 1C3A
I scoured everywhere for this driver. I know it's a driver of Intel Management Interface, but that the site does not work. Can someone point me in the right direction? I installed tons of drivers over the years and have a lot of experience, looking for unknown drivers, but when manufacturers doen't website work drivers, it's when I hit the wall.
I found this information by clicking on properties - hardware ID and will pcidatebase find Fri (even if I memorized intel as 8086) and looking for a dev id. Any help would be greatly appreciated!
Hello:
See if it works...
This package provides the original for the solutions Intel Management Engine Interface driver in the supported models that are running a supported operating system.
File name: sp57372.exe
Tags: HP Desktops
Similar Questions
-
HP 15AC650TU 4210 i5: PCI simple communication controller and Ethernet controller
Hello
Communication controller simple PCI & Ethernet controller are not installed on my laptop, HP 15ac650tu, i5 (4th Gen) 64-bit, V5D75PA...
Please help me
Hello:
You need these drivers...
PCI simple communication controller:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp71258.exe
Ethernet controller:
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp71268.exe
-
Hello
I had to restore a HP Compaq dx2300 format microtour Win XP system from the recovery partition.
Everything seemed to work fine except no driver found for PCI Simple communication controller.
There was no modem in Device Manager.
I downloaded the driver for the modem on the HP website, but it will not identify / install the driver.
Remains of the error. (no driver found for PCI Simple communication controller.)
Any Suggestions?
Thanks in advance.
My apologies to Paul.
Your label says HP Expert 2014. I made a mistaken assumption that you were part of HP.
I agree that it probably isn't a standard part of HP. I also looked at their specs and the database driver.
I tried to use never version on the HP web site for their standard model for Agere 56 K PCI Modem driver. He did not consider it as one appropriate driver.However, I could only identify a compatible driver using a new pilot identifier utility (new to me at least).
It seems to work.
I think I'll keep it in my toolbox in the future.
http://www.driveridentifier.com/
My apolgoies once again and thank you for your efforts.
-
HP Compaq 6000 Pro MT: PCI Simple Communications controller problem
Hello.
Recently I bought HP compaq 6000 Pro format microtour to used market. Today I bought the TP Link wireless network PCI card. I installed the drivers but it did not work. I noticed that I have not the PCI Simple Communications controller installed drivers. I searched on Google but could not find the drivers. So I decided to come here to ask.
Can you please link me to the controller drivers PCI of communication Simple?
I am running Windows 7 Professional 64 - bit OS on my PC.Hope I get some answers as soon as possible.
Thank you.
PS: Sorry if I didn't post it in the appropriate section. I have no idea
Hello:
You need the driver for this device. This should have no impact on the wireless adapter, you have bought does not.
-
HP ProDesk 600 g: PCI Simple Communications Controller
Have just reinstalled Win 8.1 X 64 on my system after replacement of H/D using HP provided disks. Noticed I had three errors re no driver installed. Resolved to the third question but have tried various links on the forum but with no joy re these detailed below. Someone at - it an idea. Concerning
PCI Simple Communications controller
Device PCI VEN_8086 & DEV_8C3A & SUBSYS_18E7103C & REV_04\3 & 11583659 & 0 & B0 has been configured.
Driver name: null
The class GUID: {00000000-0000-0000-0000-000000000000}
Driver date:
Driver version:
Driver provider:
Section of the driver:
Rank of pilot: 0x0
Matching device ID:
Advanced driver:
Update of the device: falsePCI serial port
Device PCI VEN_8086 & DEV_8C3D & SUBSYS_18E7103C & REV_04\3 & 11583659 & 0 & B3 has been configured.
Driver name: null
The class GUID: {00000000-0000-0000-0000-000000000000}
Driver date:
Driver version:
Driver provider:
Section of the driver:
Rank of pilot: 0x0
Matching device ID:
Advanced driver:
Update of the device: falseThese devices are part of the functionality of 'Remote Management' - a system centralized on a corporate network administrator can access the computer and make updates.
Did you run the "HP Support Assistant"?
He should find the missing device drivers of "AMT".
Of course, if you are the only 'administrator', there is no need to install support - your computer will work fine without it.
-
I can't find the driver for my PCI simple communication controller that is compatible with 8.1 64-bit windows. could someone point me in the right direction (if all goes well a link to the driver I need)? I have already spent a lot of time to research.
As I wrote above... If automatic installation method does not work, you must manually install the driver.
Here's how to manually install the driver...
Go to Device Manager and click the controller of simple communication IBOS who need the pilot.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp34743.
Make sure that the include subfolders is selected and the driver should install.
Then restart the PC.
-
I recently updated my system to Windows 7 Pro 32 bit for Windows 7 Pro 64 bit. The Simple communication controller has no drivers installed.
The problem is:
PCI Simple Communications controller
PCI\VEN_8086 & DEV_29D4 & SUBSYS_281E103C & REV_02\3 & 21436425 & 0 & 18
The drivers for this device are not installed.
I checked the downloads at HP and either they don't accept Windows 7 Pro 64 bit or not suitable for this machine.
I tried several internet solutions and they failed.
My computer is a HP Compaq dc5800 microtower
REF: KA435UT #BA
SN: [personal information]
Any help with this problem would be greatly appreciated
Hello:
You need this driver...
-
Need drivers for Port series PCI and PCI Simple Communications Controller
Hello. I recently installed Windows 7 Enterprise, SP1 on my computer 6300MT HP brand new. Windows could not load the drivers for some items, and I was able to download and install all except two:
PCI serial port
PCI Simple Communications controller.
I looked for drivers and downloads for my specific product (#QV983AV), but I can't find the drivers to install for both of these. I downloaded and installed all the Chipset drivers listed for this particular model PC. It's the index to download to my machine and the operating system.
-Audio driver
Driver - ChipsetDriver - graphics
Driver - keyboard, mouse and input devices
Driver - network
Driver - storage
BIOS
Diagnosis
FirmwareEase of management - driver package
Manageability - tools
Software - multimedia
Software - security
Software - system management
Can someone please tell me that one of these elements, I'll go to drivers for both PCI?
Grateful for your help.
Lawrin Walker
Hi, Lawrin:
You need this driver and it should install the two devices.
-
Hello
I installed Win 7 64 bit on my new computer HP 280 G1, but it doesn't find Pci simple communication controller drivers.
It's the hardware ID:
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2B34103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2B34103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780could you help me find this driver.
Thank you
Hello:
You need this driver...
This package contains the Intel Management Engine Interface driver for support of office models that are running a supported operating system.
-
Serial port PCI and PCI Simple Communications Controller
Hello!
My computer OS is Windows 8.1.
I just shearch something and I found that... I don't have serial Port PCI and PCI Simple Communications Controller. (Unintalled)
Serial port PCI-> VEN_8086 & DEV_29B7 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 1 b
Controller PCI Simple Communications-> VEN_8086 & DEV_29B4 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 18
Sorry for my English. But can anyone help me?, where I can download these files.
Hello:
Here are links to the drivers you need...
Install PCI Simple controller Comms
Install PCI Serial Port:
-
Hello. I need help.
My laptop HP G42 230 BR simply stopped access to the internet and I noticed in Device Manager that the controller network & pci simple communication controller drivers are missing. I tried to install a few drivers I found online, but without success. I formatted and reinstalled windows 7 and still the same.
Please, how can I solve this problem? Any help would be really appreciated!
Thak you.
Hello:
You need this driver for the controller of communication simple pci:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp52353.exe
You need this driver for network controller, according to the list of parts for your PC.
This package contains the installation package driver for the controller LAN Realtek RTL8191SE wireless in the notebook models and operating systems.
File name: sp47860.exe
-
TravelMate x 483 PCI Simple Communications Controller driver for windows 8 pro
Can someone give me a link to solve my problem of device PCI Simple Communications Controller driver? I use Windows 8 pro. Thank you
This isn't a driver that should be necessary on this system.
If you are upgrading Windows 7, it should have pulled the driver from 7 or installed in native mode.
If you have a system with Windows 8 natively, it should already be there.
If you have the Recovery Manager, you install all the drivers and applications from there.
Otherwise, I will propose to restore the system to factory settings.
Please see this link:
http://community.Acer.com/T5/community-KB/reloading-your-Acer-computer/Ta-p/45793 -
Hi im in need of help with 2 drivers, that I can not find I reformatted my computer and downloaded all the drivers I have including the last time but aparently, I need this time for some reason any. These are the 2 that I need.
PCI Simple Communications controller
PCI\VEN_8086 & DEV_1E3A & SUBSYS_179C103C & REV_04
PCI\VEN_8086 & DEV_1E3A & SUBSYS_179C103C
PCI\VEN_8086 & DEV_1E3A & CC_078000
PCI\VEN_8086 & DEV_1E3A & CC_0780
(USB) Universal Serial Bus controller
PCI\VEN_8086 & DEV_1E31 & SUBSYS_179C103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_179C103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03
Any help would be great THANKS
Hello:
Here are links to the drivers you need...
-
Driver for PCI simple communication controller
Dear Sir
Since the time I loaded win 7, (I have win 7 Professional, completely up to date, core 2 quad 2.40 GHz, 4 GB of RAM, 3 internal HDD seagate 1 TB at 7200 RPM, nvidia GE Force each 512 MB VRAM) I found that the driver PCI simple communication controller is missing and it shows an excalmation mark. My system works fine, I have no problems with my system, but I was wondering what is this to. I tried to find the driver on the net, but I was not able to find it. Anyone of you could help me on what it is, and how do I remove the exclamation point in Device Manager. Just concerned.
ConcerningI am an ICU consultant, doctor Dr. Alok Modi MD
You must have a compatible analog modem installed on your computer... not a problem if you don't fax or connect to a line of appeal... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
-
T500 PCI Simple Communications Controller Driver
Hi all
I installed Win 7 32 bit on a ThinkPad T500 2243-6UG. I had could, in one form or another, install all drivers except one. Who pops up as PCI Simple Communications Controller Driver. I looked at the hardware ID and got this: -.
PCI\VEN_8086 & DEV_2A44 & SUBSYS_20E617AA & REV_07
PCI\VEN_8086 & DEV_2A44 & SUBSYS_20E617AA
PCI\VEN_8086 & DEV_2A44 & CC_078000
PCI\VEN_8086 & DEV_2A44 & CC_0780
Looks like I need to download and install the intel AMT 4.0 drivers. I installed withou Management Engine Interface change. I try to install the local service manageabiltiy and series over LAN Driver and it will not be installed. He told me that the computer does not meet the minimum requirements for installing the software. Setup will close. I ran it in compatibility Vista without success mode.Can someone help me? I am a bit stuck!
Thank you
Hi Confederate,
Thanks for pointing me finger the drivers, but I had already downoloaded the drivers. I discovered that I had tried to run the Setup files that would not be executed, when I had to do was just to update the driver and that it points to the installation folder. Really simple in the end.
Thanks anyway.
rhysw
Maybe you are looking for
-
After that update to EOS10 can not download the photos said all four phones on the account is locked
Can not download pictures from iphoto on home computer after that download EOS10 said that all 4 phones are locked
-
Satellite Pro A10 - 3mm thickness vertical line on screen
I have a thick vertical line of 3mm on the screen seems to come up in colors, it generally moved to gray. The display was damaged - or is this some sort of driver problem.
-
Equium M70: display driver problem
Salvation is I got Equium m70 series.I downloaded the intel graphics drivers from the toshiba site but it quit working and displaying this error after half an hour.Error: "the ialmrnt5 display driver has stopped working normally. Save your work and r
-
Satellite Pro A100 SCOCAPS: I want to change the command for real player buttons
I have A 100 SCOCAPS, I want to change the media controls to real player instead of windows media player, but in media control list only windows MediaPlayer is appearing... all about can help me please?
-
When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt. [Moved from comments]