COMPUTER IS IN MARKET, BUT MY SCREEN IS EMPTY AND CANNOT ACCESS ANYTHING WHATSOEVER

Similar Questions

• After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

  After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

  Hello

  1. what operating system is installed on your computer?
  2. is it works much earlier?
  3. don't you make changes before the problem?

  Check if the game is compatible with Windows 7 Compatibility Web site. The game mentioned above is not listed in the compatibility Web site, it may or may not be compatible with Windows 7.

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Update of your display drivers and check if the problem persists.

  Step 2:

  Reduce hardware acceleration and check.
   
  a. click the Start button, Control Panel.
  b. now, select appearance and personalization. under display, select adjust screen resolution.
  c. now, select adjust the resolution.
  d. click Advanced settings.
  e. now, click the Troubleshooting tab, and select the change settings button.
  f. in the Security dialog box, click on continue.
  g. move the hardware acceleration slider to the third notch.
  h. click OK.
  i. restart Windows.

  Step 3:

  If the game worked fine in the earlier version of the operating system, I suggest you run the game in compatibility mode.

• I'm trying to re - install windows xp. I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  My first attempt seemed to work although I don't not re-install all the drivers at this time here.  When I then turned on computer, I got a white screen.  I took advice and tried to install xp again.  I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  Hello

  It seems that this computer is not able to detect the drive. Use the steps described in the article mentioned below to clean the disk, and then try to install XP.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  If you are able to boot to the desktop without inserting the disc, please perform a flat installation.

  How to perform a flat Installation of Flat copy CD to hard drive:
  http://support.Microsoft.com/kb/294727

• I have three problems___the is first I get the error messages form I mesh and cannot access my profile or friends list ' ___Microsoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  I get the error messages form I mesh and cannot access my profile or friends list '

  MIicrosoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  For iMesh, you can go here...

  http://www.iMesh.com/community.html

  I don't understand the other two problems that you encounter.  If you please would explain what they are and what, if any, error messages that you receive.  Also, what antivirus do you use, and you run Windows XP SP3?

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

  I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

  Hello Brenda,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Please remove Cloud Creative app using:

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO?

  COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO? I ALSO USE COMPUTER #2

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• No changes but my screen goes black and computer stops on its own

  This has just begun. Screen goes black and the computer shuts down. Is also off sometimes when I try to wake him up.

  Hello Mary LouJoseph,.

  Click the link for the who might help with your problem of black screen.
  This is whyis my screen black when I start Windows 7?

  Let us know if that helps.

  Marilyn

• Re: TV TOSHIBA 26EL800A - TV is on, but the screen remains empty

  Hi all

  I have a Toshiba TV 26EL800A purchased in May of this year. Tried to turn on the TV using the remote control mode standby (red light) to on (green light) that has the remote control - the screen remains empty (as there is no power) and after a few seconds the light changes again red - standby again.

  Tried this using the keys on the TV as well and the same thing (have checked batteries for remote control, checked PowerPoint (my dvd player works the same record 2 and it works) but don't know what else is causing the screen lights?)

  Any suggestions?

  I put t really know if you can find the solution here on the computer systems forum.
  What you can try is to unplug TV, leave for a while and check again.

  If the same thing will happen again and again I recommend to contact your local dealer and ask for help or contact the provider of Toshiba directly.

• SE error message: "nvlddmkm.sys not answer but recovered" and cannot access Starcraft II or LOTRO

  Original title: nvlddmkm.sys does not

  Just started having this couple weeks message. Killed or damaged at least one of my 9800 GT cards (SLI), which have been replaced under warranty. Who sets the part of the question of the display, but still cannot access to Starcraft II or LOTRO - connect and just get a black screen (have sound, no picture). Then the message "nvlddmkm.sys not answer but recovered" then nothing and having to use task Mgr to close the program. Here's the suspect: update the video driver (uninstalled old, clean install) which again helped a little but the screen remains black when entering the games. While they inspected the files, the file Nvidia\Displaydriver shows the new driver as the device Mgr when I check that. BUT then when I check the directory ofC:\windows\system32\drivers there is still an OLD version of nvlddmkm.sys. I'm sure that it is the culprit, but it won't let me delete it or rename it who were other corrections that I read about. I know that this is an endemic problem with Windows and has been for awhile now. ANY suggestions?

  Hi malomar,.

  1. This only happens when you play Starcraft II and LOTRO?

  You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all driver packages, Nvidia, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

  Step 3:

  To delete the folder:

  one. Click on start and Type C:\windows\system32\drivers folder in start search

  b. click on drivers and select nvlddmkm.sys

  c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

  d. restart the computer and check.

  You can also check the manufacturer's website and download the latest drivers from Nvidia:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Also check the Nvidia support link:

  http://forums.nvidia.com/index.php?showtopic=45605

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Starsiege Tribes - screen is small and cannot click

  I have a game called Starsiege tribes which came out in 1996 that I tried to play on vista with all service packs and now the new Windows 7. Even the compatibility program could not operate on the old settings. I remember playing on XP and same 98 / me.  The problem is this: the loading of the game through the sequence from the beginning to the menu page when the mouse is ineffective. I can't click on anything, but the keyboard seems to be working. In addition, the display settings are all off. The screen is small and the Windows menu bar does not disappear as it normally does when loading a game.  That and the bar of the window at the top that doesn't go away also. Any help would be great!

  Try this place.  It is tribes with practically every necessary to play, including a Vista patch update.

• I can't access my files on my VM W7 (full XP Pro OS not XP Mode) and cannot access the W7 files from a remote computer (XP Pro).

  I cannot access files W7 Pro both a remote computer (XP Pro) and a virtual machine (XP Pro not XP Mode) on my network.  I see the folders but it says that I have no rights.  I can access of W7 but not vice versa.  In XP mode, I can access the file from W7.  What is going on?

  Dennis

  Hello

  For assistance on this issue, you can ask your question in the link below.

  Windows 7 IT Pro

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• 8 computer is a mess... running XP WP 7 - cannot access tools, many mistakes see the cigarette... What can I do? cannot afford the new computer.

  8 computer is a mess... I am running Windows XP seven.

  Cannot access tools, show many errors, see the following issues...
  ERROR CODE 0 X 80070715
  ERROR CODE FOR INSTALLING WINDOWS DEFENDER
  HTTP ERRORS - directory 404 not found
  SCRIPTS - you run Scripts (gives an explanation by saying "If you continue to run scripts, that can compromise your computer")
  -the choice to continue running scripts or stop script execution...
  WEBPAGE SCRIPT ERRORS
  PUBLISHER 2010 does not run or act as it did when first installed...

  Then... I get...

  TO BLOCK OR UNBLOCK A PUBLISHER

  Internet Explorer allows you to block or allow downloadable software publishers. The Publisher is identified by the digital signature applied to the file that is downloaded. If the file is not signed, changing these settings will have no effect. For more information about digital signatures and certificates, click related topics.

  To block an editor

  If a file is downloaded to your computer, you will see a security warning dialog box. If it has a button more options , you have the possibility of preventing the download more software on your computer of this editor.

  1. In the security warning message, click more options.
  2. Click never install the software of the name of the Publisher.

  As you can see... I need to go to the 'TOOLS' to change anything on my computer... not able to access the 'TOOLS '.

  To assign an Web site to a Security - Zone could not be opened for this...

  Can someone help me with a single blow to properly operate my computer? Impossible to buy a new laptop because without finance.

  Laid off in March 2013 and need this laptop to find and apply for a new job.

  Thank you very much, Mr. VMW
  

  ... Can someone help me with a single blow to properly operate my computer?

  If this is the result of infection by the virus scanner Malwarebytes on the machine.

  Also:
  How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP

  John

• Have HP C4210 all in one, but now that windows 7 and cannot be installed.

  I just bought HP TouchSmart all in a 310-1125Y with Windows 7. I have an old HP Photosmart C4210 printer all-in-one. Tried to install the original shipped with the printer CD, but does not recognize Windows 7. I will not be able to use the Solutions Center HP which is located on the CD and cannot download said HP is on the CD. What can I do?  My printer works fine.

  Thank you

  Duke

  Hello

  Setup of full software functionality for Windows 7 is on the link below - download this and save it to your desktop.

  http://ftp.HP.com/pub/softlib/software11/COL30096/MP-74842-1/PS_AIO_C4200_NonNet_Full_Win_WW_130_140.exe

  Once the download is complete, double-click the installer to start the installation.  If you use a wired connection, do not connect the printer to the PC until the software asks you to.

  Kind regards

  DP - K