Computer keep blocking low esp when opening programs such as quick books.

Similar Questions

• Yes my computer keep blocking down with a messiage errow DCOM SERVICE TERMINATED UNEXPECTEDLY

  THE COMPUTER KEEP BLOCKING DOWN WITH THIS ERROW MESSAGE DCOM SERVICE ENDED IN UNEXPECTED WAYS WHICH COULD DO TO CHANGE THIS PROBLEM

  Hi Frazier834,

  Let us try the following methods.

  Method 1

  Do a virus scan online on your computer. You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the contract of

  Method 2

  Try to check if the DCOM Server process Launcher service is running on the computer.

  You must be logged on as administrator to perform these steps.

  1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3 right-click the DCOM server process Launcher serviceand then click Properties.
  4. on the general tab, next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.

  1. open Event Viewer by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click Event Viewer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on Journal of the events in the left pane.
  3. double-click on an event to view the details of the event.

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  Reference:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Intermittent freezing of the computer when opening programs

  Hello. I have intermittent freezing problems which I will try to describe. About 5 to 7 times a week I click on a link like Comcast Mail Office.

  The 'think' rotation slider will begin, the page does not load and then a message appears after a minute or two for example 'Windows cannot find Comcast.net' the only way I was able to solve this problem is to restart with the power-it button does not restart by using the standard method. I pretty much can do nothing until I restarted and then the computer works well. Comcast has tested the modem and the connection and says it's ok.

  The issue occurs at random times. It happens more frequently when I begin a session, but it froze several times while I'm running an application or are already on the internet. I performed the tests in the pc tools and things seem ok. I have 3 GB of ram and a measure of consumption on my desk that indicates normal operation.

  Any thoughts would be appreciated. It is far from aggravating and barely embarrassing, but I would like to know the cause.

  Hi Kenny,

  Please see the following thread (even if it is a different issue, some of the troubleshooting steps are the same):

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• When open programs from the windows desktop icons opens on the right side of the screen

  original title: elements of flight out of the open window

  When I open something in my office, as IE or VZAccess Manager, it will show that the issue is there, but the page will immediately fly across the screen off screen to the right.  My cursor also will go on the right side of the screen contrast to the left while the cursor stops at the border... when I do a system restore, it seems to fix the problem for a short time... but back then in this game of hide that let me guess if the program is open or not... it is a display problem or what...

  Hello Slwaldaias,

  Thanks for your post.  Have you ever had two monitors connected to your computer?  If so, this is probably still in place and tries to open the windows on the other monitor.  You can correct this by ensuring that your computer settings are for a single monitor.  If you have never had a second monitor, the first step would be to scan your computer for malware.

  Use the malicious software removal tool to perform your analysis.

  We can't wait to hear back on your part.

  See you soon

• PC takes long when opening programs

  I WAS WORKING IN MY LAPTOP (DELL INSPIRON 15?) THEN I OPEN A PROGRAM AND UP DATE CAME IN AND NOW I TRY TO OPEN ANY PROGRAM AND DO NOT TAKE TOO LONG AND AT THE END SAY WINDOWS DOES NOT I TRY TO SAVE DID NOT WORK, RESTORE DON' WORK AND A FEW TIMES I CAN NOTHING DO BECAUSE SAY WINDOWS DON'T RESPONDE! COULB BE A VIRUS O PROBLEMS WITH ANY PROGRAM? PLEASE HELP ME THANK YOU...

  Hello

  ·         Have what program you tried to open?

  It might be a virus problem. However, try one of these:

  Step 1: If this program is causing the problem, then uninstall the program in safe mode.

  Note: If this program uses windows install, you will not be able to uninstall in safe mode.

  Step 2: Run also a scan of network in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the agreement.

  Step 3: If this does not help, then check at boot.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Illustrator CC 2015, after the upgrade from 2014 CC, crashes when opening program/opening file. Says error: operation cannot be completed due to an unknown error. [IMPORTANT]

  In addition, after the opening of the program, he showed an advisor to remove one of the swatches plug-in library, which I did, and it did not help. I tried to uninstall too no effect.

  Please, some advice. I use Windows 8.1

  Solved the problem in a logon session. Uninstalling and reinstalling solved the problem.

  Sanjay.

• Firefox keeps blocking flashplayer

  keeps blocking flash drive when it is updated

  If you are not accustomed to using the "Request to activate" feature with any of your plugins, here's what to expect:

  When you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the Lego-like icon in the address bar to allow Flash.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification. It will just sit there in case you later want.

  Until this ordeal of previously unknown security flaws shakes, you might want to try this and see how it fits. To set the Flash 'Ask to activate', after that you have the latest version installed, open the page of modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

• Cannot open programs and have to restart to solve

  Reappears after a few days of working fine since the previous reset.
  Double click on icons and Ctrl-alt-del does not open programs.
  Start menu open and I can choose "shut down the computer. All programs will not open when I mouse over.

  When he reappeared yesterday, I booted in safe mode and ran full scans with Malwarebytes Anti-Malware and Microsoft Security Essentials.
  Neither scan found no threat.

  I am running Win XP Pro SP3.

  Hello

  I appreciate your efforts to solve the problem.

  1 did you changes to the computer before the show?

  2. that you get an error message/code when opening programs?

  3. are you able to access all the programs and applications open in safe mode?

  4. which icon, you are able to open?

  I suggest to refer to the article and follow the steps to solve the problem. Check the event viewer to find the cause of the problem. Here are the instructions:

  Method 1:

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: Refer to articles:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HVhJmdoAiKy

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=97QYdW2XfTc

  Method 3: Check in safe mode with network and then a clean boot

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222/en-us

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Please follow these recommended steps and post if you still experience the problem. I will be happy to provide you with additional options.

• Sounds of the computer when a program opens or closes

  Without my OK, my computer automatically downloaded Windows 10. I brought my fix it shop to get Windows 7 on. When this was done, I found that none of my sounds play when a program opens or closes except when my email finishes loading and are ready for viewing. The fix in this catalogue could not understand why this happened and are always looking for a solution to this issue. Any ideas?

  Back to default sounds:

  Control Panel, hardware and sound, change system sounds

  Audio driver may need to be installed/re-installed. Go to the OEM support page and download the driver.

  Eventually, it installed the wrong driver.

• I am trying to convert my trial creative Cloud to a version of payment, but I keep blocked when the computer asks me to enter a serial number, WHERE can I FIND? Thanks for your response

  I am trying to convert my trial creative Cloud to a version of payment, but I keep blocked when the computer asks me to enter a serial number, WHERE can I FIND? Thanks for your response

  Hello

  You can check out the link below.

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Hope this will help you.

  Kind regards

  Hervé Khare

• When opening 2014 CC PS I get the message "the program cannot strt because ONCoreFoundation8.dll is missing on your computer. Try reinstalling the program to fix this problem.  I did and still get the same message.

  When opening 2014 CC PS I get message "the program can't start because ONCoreFoundation8.dll is missing on your computer. Try reinstalling the program to fix this problem.  I did and still get the same message.

  I have no errors during the installation process.   I have now gone PS cc, copied all the files with ONCore - and paste in the location of the same file in 2014 CC PS.  There is now no error report when I run CC2014 PS and everything seems to work properly.

  I'm still not sure why Adobe has PSCC2014 rather than an update on PS CC.

• Your computer is low on memory. To restore enough memory for programs running, save your files and then close or restart all open programs.

  I don't understand what I have to do. I don't have any open programs or files.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions in the links below that may help you resolve the issue.

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• MsiExec.exe * 32 keeps trying to install when I start my computer

  MsiExec.exe * 32 keeps trying to install when I start my computer

  Hi id75080

  Thank you for using the Microsoft Answers Forums!

  When you get this error? You try to install a program? Or just come to the top when you restart?

  Try these steps and check:

  Step 1: Stop and restart the Windows Installer Service.

  1. click on the Start button or press the Windows keyboard.

  2. in the search box, type Services and then click on the Services element that appears at the top.

  3. expand the Services window and then scroll down to Windows Installer.

  4. right click on the Windows Installer list item and then click on stop, right click again and then click Start.

  Step 2: Unregister and re-register Windows Installer.

  To do this, follow these steps:
  1. click on start and then click Run.
  2. in the Open box, type msiexec /unreg and then press ENTER.
  3. click on start and then click Run.
  4. in the Open box, type msiexec/regserver, and then press ENTER.

  Step 3: SFC Scan

  The SFC utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a sfc on the windows vista computer scan. To run a scan suite sfc as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  NOTE: you must log in using the administrator account and try to install it like that. Or you can also try running the program by right clicking and select "run as Administrator". It should work.

  Step 4: Utility Windows Install CleanUp:

  Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Download the latest version from the following link: http://www.microsoft.com/downloads/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Refer to: http://support.microsoft.com/default.aspx/kb/290301/

  NOTE: , We can have only a single anti-virus installed / running on your computer at any time. Conflicts, system crashes and frost can occur if you have an Anti Virus installed and running on the computer.

  Step 5: Windows install

  We need to install the latest version of Windows Installer that is 4.5, the link to it is:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Restart and check if you get the same error.

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my computer runs constantly indexing. When I try to close it keeps giving me the message: installation of updates 1 of 2.

  Why is my computer running constantly indexing

  When I try to close it keeps giving me the message: installation of updates 1 of 2.  I left this race for twenty four hours and he never finished.  I have to cut the power to shut down.  When I turn it back on, it is constantly indexing.

  Hi Gary,.

  ·         Have you checked if there is updates failed?

  Check to see if the following is useful.

  Step 1: search for the installation error code.

  To do this, follow these steps:

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

  d. Note the error number. You will have to type or paste the error number in a search box to the next step.

  Step 2: Run the next Fixit tool and then install updates.

  Diagnose and automatically fix common problems with Windows Update

• Wireless mouse left button does not open programs when double-clicked.

  I have a new Office Tips multimedia - microsoft wireless keyboard and mouse.  Sometimes the icons on the desktop when you click the left button double does not open the program.  And there are times when the program is opened, you can use the left button to navaigate within the program.  Why is this happening?  For the desktop icons, it happens more often in Internet Explorer... Help me please!

  Hi amwash55,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Check and make sure that the mouse settings are correctly set.

  Set the double-click of the mouse speed

  http://www.Microsoft.com/enable/training/WindowsXP/doubleclickspeed.aspx

  If the mouse settings are correct, then make sure that you have installed the latest version of the drivers for the device.

  http://www.Microsoft.com/hardware/downloads/default.mspx