Your computer is low on memory. To restore enough memory for programs running, save your files and then close or restart all open programs.

Similar Questions

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• Windows 8 - your computer is low on memory-save and close files or restart

  Your computer is low on memory - to restore the memory for programs to work correctly, save your files and then close and restart all open programs.  Don't know what to do.  I have Windows 8.  The printer is also slow and difficult to work.  He says that the printer is offline.  Help

  just for Samsung ultrabook

  many users ultrabook Samsung had a problem with the RAM and noticed that it was related to the presence of the software named IntelliMemory... this software is preinstalled by Samsung...
  I searched in my Samsung ultrabook, but doesn't have a DIF he...
  then I started searching on google and found that IntelliMemory is a software produced by the company 'Condusiv Technolgies'...
  I went to C: / / Porgram files and subfolder found a "Condusiv Technolgies '...
  wanted the .exe inside. It is an executable named 'expresscache.exe '.
  then uninstall the expresscache and everything is back to normal...
  and my RAM could take a rest...

• Close programs to prevent the loss of information. Your computer is low on memory. You save files and close programs. Java (TM) Platform SE binary Windows Media Player

  Hello

  I keep getting the following error message, and leterally having my computer off over and over again, even if I added 1 GB of RAM (now 3 total RAM) mor and also added a 8 GB SD card as more power:

  Close programs to prevent the loss of information.  Your computer is low on memory.  You save files and close programs.  Java (TM) Platform SE binary Windows Media Player

  I did research on the various search engines to know that many face the same problem, with a variety of possible solutions, but so far, none work.  We suggest that I go to Regedit and change the permissions of the user and then delete the old files, after I import them.

  Needless to say, I am just a user and have just a bit of technical knowledge.  The local PC repair shop in my town has no idea what to do.  For anyone who has a solution to this problem, help will be greatly appreciated!

  Randy Kline

  First of all, unless you know EXACTLY what you do and WHY you do it. I personally recommend never do anything in regedit. I consider myself a moderate to advanced computer user and a moderate user of windows. And I always stay away from regedit, if I can, because you can seriously screw things if you don't know what you're doing... Although, to be honest most of the settings will not have a devastating drama.

  It seems to me that this is a memory leak in the program, you will get this error message to make sure that your computer will just crash, because if she is running out of RAM... Well it will crash.

  If you have a 2 and a 1 GB for a total of 3 GB, I recommend the upgrade once more and just round up to a nice 4 (this is the most of memory a 32-bit system can handle in total)

  Works of memory in a way that you see really only a few performance jump with memory dual channel, the only way to have that is really striking the rods of same in each slot.

  There isn't really a reason that this happens every time, except that simply your computer is low on MEMORY, when your computer says this means RAM, not disk memory storage area.

  If you clean your computer of the programs you never use and stop using windows media player (itunes is better in my opinion, even if you don't have an ipod), you can see an improvement, but to really isolate the problem, I recommend simply opening your task manager as soon as you start your computer (ctrl + alt + delete usually gives you the option or it opens directly) otherwise you can do start-> RUN taskmgr.exe , OR type taskmgr.exe in the search box and press on enter.

  Then, look at the column of memory as I said it sounds like a program has a leak, and you will see that is because memory will begin at low/normal and then numbers just keep climbing...

  Also, make sure that your computer recognizes all 3 GB or RAM. in Task Manager if you have access to the performance tab, under physical memory must be a thing called Total, 3 GB = 3074. If this is not an option in your reason, you can go under Accessories/System Tools system information (on the start menu). (may take a while to load) but on the home page, you should see something that indicates the amount of TOTAL PHYSICAL MEMORY. You want to read this / 3GB or 3074 MB.

  Hope this helps some!

  I recommend to remove all programs, you are ready to, especially those that you never use. Do a complete uninstall. Then start installing windows clean (download google) just to make sure that the program has been removed. then go start--> run msconfig OR just type msconfig in the search and click on go (I don't know if you're running XP or Vista/7)

  In the msconfig dialog, you should see a section that says startup. Don't forget to remove programs that you do not first. Disable startup programs, you use every DAY. Don't go turn off all if windows needs some process to run, and some processes don't effect anything. But if you're curious, you should be able to google all of startup items and see what it's related to and why you do or that you don't need.

  Good luck! Sorry, I'm everywhere with this response.

• Windows Media Player says * your computer is low on memory. Quit other programs, and try again

  Original title: HELP!

  Hello! When I want to watch a movie on my computer then WMP appears and says * your computer is low on memory. Quit other programs, and try again *. I deleted a lot of files and programs, so I have 13 and 39 GB on my Local drive, but it still does not work. Could someone please help? Thank YOU

  YOU

  It is not said you're low disk space, it says you're low on RAM.  We can tell you more if you tell us your system specs.

• Your computer is low on memory. Quit other programs, and try again. . NO IT's NOT... and no other prog running... player victory med doesn't work anymore...

  I get this message in box "[your computer is low on memory. Quit other programs, and try again. "] When I try to run my videos on wmplayer as ive allways done and now this..." the only recent download, I was able to isolate is silverlight, but have disabled it makes no difference, have already asked on this forum but will try again in the hope, I looked at a few sites referring to this prob, but without a bit of luck, I see is not just me at least... Let's hope that any 1 out there can be help Thank you

  Hello

  You may need to change the amount of virtual memory available:

  Change the size of virtual memory
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  CTRL SHIFT ESC to Task - tab process manager - click on the column of memory (may have to click twice)
  to see what is using all the memory that should not. Right-click on anything that uses a lot of memory
  and there might be other options like going to Services where "there" is a service associated with
  Note.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Your computer is low on memory. Quit other programs, and try again.

  I note that others have the same problem and said that your suggested solutions did not work, but did you check the motion as answered in all cases.

  I have windows 7 and windows media player 12.0.7600.16667. I play about 3 or 4 videos and get the error message "your computer is low on memory. Quit other programs, and try again. ». As others have noted, I tried the corrections suggested by using the Troubleshoot utility and fixes suggested in similar queries (virtual memory setting etc.). NONE OF THESE WORK! These problems don't to do not manifest until what I installed windows 7 and windows media player 12. What about a solution that works! Returning to WMP 11 would be a possible solution? Any other suggestions besides run the troubleshooter and replace the virtual memory?

  I have gateway with AMD Athlon (TM) 62 x 2 dual core processor 6000 + 3.0 GHZ and 3 GB of RAM.

  Also have ~ 2 TB memory physical and 3 GB of RAM to play with my computer's memory is not the issue, windows 7 or windows media player 12 or the combination windows7 and WMP 12 is the question. If you cannot offer a solution please ask Uncle Bill to divert resources to solve this problem please (preferably before the next version overpriced and underperforming Windows is imposed on an unsuspecting audience). Thank you.

  Hello

  ·    What is this problem only occurs when you use WIndows Media Player or other applications as well?

  ·        Did you the latest changes on the computer?

  Method 1:

  If the previous step fails, then perform the clean boot procedure to verify if a third-party program installed on the computer is the origin of the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Prevention of problems of memory

  Alternatively, you can follow the link provided below for more information on the problems of memory in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/preventing-low-memory-problems

  Method 3:

  I also suggest to run Msconfig (System utility) and place a check on maximum memory and see if you get the same error again. To do so follow the steps below:

  (a) click Start.

  (b) type Msconfig in Windows search bar and press ENTER.

  c) select the TAB that reads start.

  (d) click on advanced options.

  (e) place a check on maximum memory.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

  ·        This problem occurs only with Windows Media Player or applications?

• I get an error message saying that my computer is low on memory

  I am running Windows 7 and I have 6 GB of RAM. I don't understand why I get an error message saying that my computer is low on memory when Google Chrome is the only thing open. I just reinstalled Windows 7, so I have no downloaded programs. Then, once I get the error message, Chrome crashes and the computer slows down a lot and nothing wants to work properly. Also, when I try to restart or shut down, she remains on are disconnecting or stopped for more than half an hour, until I have to disconnect the computer from the back because it does not turn off its own. Please help with this. Thank you!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• Keep, send a message, this computer is low on memory

  Original title: low memory

  I have a Compaq laptop with 2 GB of memory running with Vista, I get a message that my computer is low on memory.  When I check the Task Manager it shows 88 percent used physics.  This leaves little to run certain programs, it is common?  Only applications shown running resource monitor and this open web page in Firefox. Why should computer use such a large ammount of memory?

  Hi AndyHarrap,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can check the following items and check if it helps:

  Prevention of problems of memory

  Optimize Windows Vista for better performance

  Hope this information is useful.

• I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  If you purchased Word on CD, it's no big deal; just reinstall it after the factory restore. If it was bought online, copy the file downloaded to a CD and then reinstall it later.

  Is there a particular reason, why you want to do a restore complete? Have you problems? If so, you can try asking here on how to fix them and do not have to do a restore, reinstall all your programs and all of the updates and service pack 1.

  SC Tom

• "Sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you. "windows 8

  Hi so I recently bought a new computer and out of no where he worked in some really annoying errors. This has happened three times, I can't understand a reason yet, AFAIK, it occurs randomly. A few times I start up my computer and it starts just the windows icon, the loading circle is not displayed. If I let it run it will remain still frozen. After a few reboots, he says still 'preparation auto repair' is still frozen. This has happened 3 times.

  The first time I have not jumped into the recovery CD, no problem, used a system restore, it was all good.

  The second time, she actually had a cause, our power went out and my pc was used, then maybe he could have ruined a circuit. So I put the CD, it wouldn't recognize it and if he did, he would freeze just and nothing to do. I tried F8, F12 and F1: he didn't even recognize these keys or react at least based on them.
  After a few restarts I miraculously managed to do recognize the CD and this time I made a cooling system.
  This lead me to think it might be some of my files/programs, but I'm still working on acquiring them all back after the update so I think it is unlikely that. 3rd time: yet once, it happened when I turned it on after a normal closed. It would not recognize the cd or the keys. After maybe 15 attempts, but rather oddly, everything was OK? I also noticed that my Tablet Wacom Intuos 5 is connected it will not start, but if I unplug it, it starts very well. (Driver error?)

  All this is fine and dandy, I can deal with it, but not until recently that error in the title stood. I noticed, that it normally occurs when the computer is in "sleep" or the monitor turns off because it is inactive. If I move the mouse to bring on the monitor, it is just a bright blue solid then the following message: "sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you"appears and it stops. Whenever this happens, it starts up just fine, it is just annoying it encounters this error whenever I use it. I tried to do system recoveries, but it did not help. I can just do a reset or refreshment, but again once I do not want this effort and to lose files if the error is still going to happen. I'm not sure if this is a hardware error, heating, maybe? But I'm not all that experience in these things. As I said, this computer is fairly new, maybe 2 months, then maybe I could just put its warranty policy to use. But if you can think of anyway to help, it would be great thanks!

  My specs are:
  Avatar
  CPU: AMD FX Processor with Six cores (tm)-6100 3.30 GHz
  GPU: Geforce GT 640

  16.0 GB
  operating system 64-bit, x 64 processor
  Windows 8.1

  Hi Kaelie,

  This issue seems to be with the material. As you mentioned that your computer is under warranty. It would be better if you contact the manufacturer of your computer for help on this issue.

  Just reply to us if you are having problems with Windows in the future. We will be happy to help you.

• Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  To jscher2000 ~ I did what you said and it says "Media player could not be verified for use in Firefox. Proceed with caution. My husband told me to just delete, so I think I'll do it. Thanks for your help! Nice day.

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• SE message which, due to the security I have to save the citrix .ica file to the location on the computer, and then double-click it to open.

  I just put on my computer citrix.  I need to work, I get all my apps to work through it.  When I try to open one of the citrix apps is telling me to save it to my computer, then double-click it to open it because of my security settings.  I tried and it won't do anything, that it gives me just the option for approximately 10 seconds for first save and then closes this window.  I can't work if I can't get these apps to open HELP for me!  Thank you.

  Go to the following site to see if you can download the customer Citirix Metaframe. I think that your problem should be solved. http://www.Citrix.com/English/SS/downloads/index.asp

  You should be able to open your applications after you have downloaded this, let me know if this solves your problem. If this is not the case, will do a research still further for you.

• Easy Transfer Wizard error: there is not enough available disk space to transfer your files and settings. The download file size is 40 GB and I have a C: drive that says he has 280 GB free and a D: drive has 298 GB free.

  I made a successful backup of the Easy Transfer of files on an external hard drive.  Previously, this computer was in Vista for more than 1 year without any problem.

  After you perform a custom installation (I wanted to start with a clean install) of Win7, everything works.  I installed the Windows/Office updates and all my other program files.  When I run the transfer Assistant, it locates the 'old computer' transfer file and reads OK, showing users and the size of the 40.1 GB file transfer.  When I click the button forward, I get error: there is not enough available disk space to transfer your files and settings.  However, I have more than 280 GB free on my C: drive.

  This disc is watching him and what should I do to work around this problem.  If I can't get my files/settings back, I'll be VERY unhappy customer.

  I've just passed through even - WET previous Dell PC running Windows 7 Ultimate to HP with Windows 7 Home Premium. The Belkin Easy Transfer cable help.
  WET said not enough space even if the hard drive is twice the size.
  I clicked on "Advanced" and noticed that WET strives also transfer Dell factory image from the recovery partition and the HP recovery partition was smaller.
  I unticked (unchecked) files recovery partitio on old computer and everything is going very well from hand to hand.
  Hope that helps!