Computer laptop closing

Similar Questions

• Computer laptop closed? Fan overheating?

  Hi all.

  I have read many topics on this forum about on any laptop fan not working not, laptop computer overheating or the laptop apparently randomly stopping.

  I had this problem for about three months. I tried supporting the laptop so the fan (stupidly positioned in the middle of the base of the laptop!) could get air. He was not arrested, but it was ridiculous to have to raise my laptop everywhere wherever I was going, and fan was also ridiculously strong.

  I took my laptop to a doctor and it turns out that there was a fault with the chip on the motherboard that controls the fan. It caused the fan not work properly, causing overheating and computer laptop closed.

  I set myself and my laptop is now nice and quiet and I don't have to support it and it is not closed.

  Sorry if this is bad news! Hope you can get your laptop fixed!

  [Edited by: admin]

  Bad news. Anyway thanks for the info.

• Cut random downs and crashes. Computer laptop closing at startup. No virus, what is - this?

  A few months my computer has been acting crazy. Lately, it is essential, it is closed right after it starts. Another thing, it tends to do is to enter a State of low power (not in standby or Hibernate), with all the lights and power always, by discoloration to a black screen. I tried every key sequence to bring my screen, but it never does, so I find myself manually shut down my computer in now the power button. Last night I shut down my computer and as I turned it on this morning I had the 'blue screen of death '. I have no virus and I'm starting to think that this has something to do with the inner workings of my computer (things that I have no idea about). I don't know if I need new drivers, need to clean my registry, I've already defragged my computer, or if I have a chance to save my laptop.

  I also don't have any specs on my computer and don't know how to find them or the other. These problems that I said start to become a great inconvenience, but I have a bunch of stuff saved on my computer, so it is difficult for me to move on to the other laptop I have for my daily use. ANY help would be greatly appreciated, I'm desperate!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  To be able to remove ALL and reinstall all the cables (both ends), card and memory - really remove
  and replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  ===========================================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  You can use Mode without fail - repeatedly tap F8 that you start?

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Computer laptop closing drank himself and the battery goes from fully charged low battery in a short period of time?

  Hi I have a question about my laptop Toshiba Satellite. I've had it for almost 2 years and it worked fine up until just recently, my laptop stops itself and I thought before that this could be due to a heating problem but when it stops my laptop is not yet hot. I have installed new programs or anything again for that matter so I'm honestly confused? What's wrong with that? I also keep my laptop on a laptop computer fan to keep over heating.

  Hello

  It might possible that the battery is going bad.

  However, try the following steps:

  Method 1:

  See the link, then run the Fixit.

  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us

  Method 2:

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/battery-meter-frequently-asked-questions

  If the steps above fail then I would suggest that you contact Toshiba support. Check out the link.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  It will be useful.

• Qosmio X 500-106 - after update driver, close the computer cover closed

  06/09/2010, I have updated my driver Qosmio X 500 - 106 Nvidia GTS 360 M and now when I close the lid of my laptop it stops completely.

  I checked the settings in the "power options" on "then of closing the lid" section and I have to go to sleep, what she has done well before. Until I opened my computer laptop to login screen, and he would ask for password. Now, every time I open computer laptop it re-boots and request I would go in "safe mode, safe mode with guests, etc...." »
  Anyone having problems or is this an update of the driver that went wrong?

  Any help greatly appreciated

  the driver update has been 8.16.11.8875

  Thank you

  Hi lizardk101,

  If this happens since the new display driver, you must reinstall the old version. Therefore, you can use the restore system to a previous point.

  Check this box!

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha

• Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  How do you partition the disk?

  This is what app or OS that do you?

• Printing a Web page to a .pdf or .xps file generates a file but it is empty. How can I fix it? I have Firefox 40.0 on a new computer laptop for Windows 10

  When I print a Web page to a .pdf or .xps file, it creates a new file, but file Explorer says it's 0 KB in size. These .pdf files will open, but they are white - the only thing that appears is the outline of a page, without anything in the outline. When I print an .xps file, File Explorer shows that it contains 0 KB. When I try to open it, I get a message saying that the XPS Viewer cannot open the file. These things just started for me a few days after I installed Firefox 40.0 on a new computer laptop of Toshiba Satellite with 10 Home Windows operating system. I have the latest version of Flash Player (in fact, I just tried redownloading and reinstalling the current version; that does not solve the problem). I tried to change the format by default to print to .pdf file, but that has not solved the problem. I contacted the chat Windows support site; They told me that it was not a Windows problem. Is this a Firefox problem? If so, you can tell me how to solve the problem, please?

  Thank you
  ssavage

  First of all, try to disable the extensions to see if that helps this, then try safe mode.

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • The problems of Firefox in Mode safe

• Yahoo gave me the block www site; now unable to use firefox on computer laptop win7

  looking for something on yahoo mail. announcement above asked me if I wanted to block - stupid me clicked on it. Now impossible to open what anyone with Firefox. Internet Ex and other work programs. Ran AVG and MBAM and hard reboot, not change. I can try to uninstall Firefox and reinstall but worried this virus can do additional damage to computer laptop may.

  Ideas? I'm in the middle of trying to sell the property out of State.

  You use the extensions (Firefox/tools > Modules > Extensions) that can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery)?

  If you then click on their icons in toolbar and search the blocked items.

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• OMEN of HP for computer laptop 15-ax006no: best way to use the battery

  Hello!

  I bought a HP OMEN for computer laptop 15-ax006no (http://store.hp.com/SwedenStore/Merch/Product.aspx?id=X9Z44EA & opt = UUW & salt = NTB) earlier this week and I wonder how is best to use and to keep the battery?

  -Should I disconnect the battery when I have access to outlet?

  - Or should I fully charge and then use remove the charger and only work on battery?

  Thanks in advance!

  Hello

  Batteries and Chargers for modern laptops are now smarter than we thought. They stop to load when 100% full

  1. Should I disconnect the battery when I have access to outlet? You, the risk is down, you have no backup power supply and it can kill your machine, speciall if she had a normal HARD drive.
  2. Or should I fully charge and then use remove the charger and only work on battery? This isn't a good idea because the battery will run out and you will need to recharge which means increase in cycles and the charge battery will die earlier.

  My option: maintain the battery even when plugin

  Kind regards.

• Pavilion G6 - 2163sr: Max RAM computer laptop HP Pavilion G6 - 2163sr

  Hello

  I want to improve my laptop for 2 * 8 GB RAM. Motherboard supports this amount of memory?

  So understand, my motherboard model is HP 183rd (U3E1) but I didn't find its specification in the web.

  Thanks in advance.

  Here's the official specs:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03362719

  Basically, the motherboard is the laptop model. Laptops are designed of the earth upward by the manufacturer so there is no separate computer laptop itself set of specifications of the motherboard.

  The specs say 8 maximum of concerts, but it's a 3rd generation of processor Intel Core. However, the maintenance manual, which is usually more reliable than the specifications, said as 8 GB maximum and does not specify a compatible 8-gig module.

  Repair manuals

  Even Crucial said 8 maximum of concerts and they perform ongoing tests because if they can sell you larger modules they want to be able to do.

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Pavilion-G6-2132tx

  So, bottom line, I think it might take 2 x 8 gig modules, but it would be a big gamble and I guess that it can take only 2 x 4 GB.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pav 23-1010t: connect HP Pavilion dm4 computer laptop to HP Pavilion 23 all in an office?

  I would like to connect my HP Pav 23-1010t All in One Desktop on my computer laptop HP Pav dm4.  For the purpose of switching between the two, using the HP Pav 23 video/monitor, keyboard and mouse to control what's on the laptop.

  A KVM will pass work?  Some swtich or other cables?

  Hello

  No, this won't work KVM or other cables.

  Kind regards.

• Satellite L300-1 has 3 and WXP - computer laptop is very slow

  I installed Windows XP computer laptop Satellite L300-1 has 3.
  After portable installation is very slow, I think that the problem in the SATA driver.

  Please send me the driver SATA for Windows XP Home edition, or please give me the solution.

  Thank you

  Hello

  May I ask how you installed Win XP?
  Did you change the SATA mode on compatible in the BIOS settings?
  If yes then this problem is related to the missing SATA drivers!

  You can find the SATA drivers in the Intel Storage Manager which is placed on the page of European disk from Toshiba!

  Launch the .exe with the settings file a p

  For example (the files will be unpacked in the storagemanager folder):

  c:\downloads\iata_cd.exe - a c:\storagemanager Pei

  An accurate description, you will find in the Readme! Read it!
  Then you will get the unique file which could be included for Win XP CD using nLite software!

• Equium A300D computer laptop completely shutsdown randomly times

  Equium A300D computer laptop completely shutsdown randomly times
  It could be overheating.
  He really can not cope when you try to restore the i-phone - I was unable to do what the laptop is not long enough
  Reading and / or burning media is also a problem
  Any thoughts on how to fix would be appreciated

  You are right. It may be overheating problem.
  Mobile is also pretty hot when suddenly stops?

  In my opinion you should clean it.

  A friend of mine had the same problem with its A350. After laptop cleaning problem has been resolved. With other words, laptop has been disassembled and cleaned properly.