HP Pav 23-1010t: connect HP Pavilion dm4 computer laptop to HP Pavilion 23 all in an office?

Similar Questions

• Internet connection is lost in computer laptop and Xbox when I fill the network.

  Original title: the network bridge is being gay

  well IM one of the problems with my network bridge that I connected to my card built into my laptop and im for my throu xbox wireless bridge the LAN, and unless he is satisfied, I have internet but when I fill my connections he said: no internet access and I can not access the internet on my laptop and now my habit of Wi - Fi allow me to connect to what anyone I don't have the shared option on check and my connection is really horribly slow and its never been this slow before

  Hello
   
  1. when the question is is produced?
  
  2. you remember of any changes to your machine before the question?
   
  I would like you to follow the steps mentioned below
   
  Step 1:
   
  Instead of bridge, you should be able to share the connection from your laptop.
   
  a. Click Start, click Control Panel
  b. go to your network and sharing Center.
  c. on the left side, click on manage network connections.
  d. right click on your wireless network adapter, click Properties, click the sharing tab, mark the tab to share this connection
  e. click on apply, then try to connect to xbox with your ethernet cable, either incidentally, it must be a crossover cable in order to function.
   
  Step 2:
   
  Disable all security software temporarily and see if the problem still occurs.
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• 23 Pavilion: Pavilion inadmissible all in one office

  During the night my all-in-One HP Pavillion was a whirling noise, and then the shots as if it was updated.  Since then, I have not been able to start.  If you press the Start button, it flashes for about one second and turns off, out of order?  I have McAfee Security and it works every day.  What could be the matter?

  Hi @dcw2482,

  Thanks for reaching out! It is a great location to get resolutions and interact with experts from the community. I understand that the computer power not on. It will be a pleasure to help you.

  You did a great job on diagnose the problem on your side. Kudos to you on this point. It is always a privilege to work with tech-savvy and technically competent customers like you. We greatly appreciate your relationship with HP.

  It looks like a hardware problem with the computer. Isolate the problem correctly.

  Please do a hard reset first. Link for the hard reset: http://support.hp.com/za-en/document/c01463028

  Then try turning on your computer. If it works, then the issue should get resolved. Otherwise, please try a different wall socket, bypassing any power strips. If possible, please try a different power also cord. If nothing works, the computer needs to be repaired. Please contact the HP support by phone by visiting this link: http://hp.com/contacthp

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• driver for the ethernet connection on Pavilion M7750n

  Can someone direct me to where I can download the driver for the ethernet connection on Pavilion M7750n?

  The list of specifications HP:

  Hello:

  No, use the chipset XP driver...

  http://www.nvidia.com/object/nforce_winxp_15.26.html

• Product: HP Pavilion computer laptop problem: connections of unstable bluetooth wireless speakers

  Hello:

  My problem concerns the following product:

  Laptop HP Pavilion 15.6 inch screen (15-e084ca), AMD Quad Core A10 - 5750M and 8650 Radeon graphics card, 1 TB hard drive, 8 MB of SDRAM DDR3, Windows 64 - bit 8.1.

  I have a bluetooth microphone speaker clarity HD monster and player of bluetooth Philips shoqbox, a shooting game sound bluetooth Philips.

  In all 3 cases, I could connect the speakers and use them, but the connections are unstable. The laptop automatically interrupts the connection. It happened several times. I have many different versions of this problem.

  Once the speaker is disconnected (either manually I disonnect it me or does the laptop on its own) it can be difficult to establish an extermely reconnection.

  If someone has had and solved this problem, please share the information with me.

  Thank you

  Hi laptop_user,

  Next time you see one of your devices in the Device Manager with the exclamation right click on it and go to properties and there should be a State of the device that will tell us the problem. Also install your software from MediaTek Bluetooth driver and then try to connect. Also check using Bluetooth devices for more information.

  Thank you

• I cannot connect hp pavilion labtop 2000 fx for I - Phone 3 16 GB via blue tooth

  I cannot connect hp pavilion labtop 2000 fx for I - Phone 3 16 GB via blue tooth

  and not even with connection cable USB

  Hi removed Abu Qorah,

  1. are you able to connect the iPhone to other phones or another computer via Bluetooth and usb with no problems?

  2. you receive messages or error codes?

  You can see the Apple support article and see if it helps:

  iOS: device not recognized in iTunes for Windows

  Hope this information is useful.

• Connect HP Pavilion p6610f old receiver onkyo (TX 866)

  I hate that it's so hard to find info on things connecting to computers these days...

  just because they tell you there are ports for in/out/mic/c-sup/back/side does not mean you're going to know what most of them are for.

  I currently have a pair of speakers pc & subwoofer (yamaha) connected to the "in" port, & a small microphone connected to the "mic" port, but I have no idea how I should use other audio ports, or not at all. (should I use port "c/sub" somehow? I'm confused about this facility, as it is - since I haven't looked for ages)

  I have this old receiver connected to a different pair of speakers, & is in the room that I now have the computer, so I thought I would connect it to the computer to listen to audio or watch shows from time to time or something.

  is there an easy way to do this? (the receiver has the old ports for phono/cd/tape1/tape2/vcr1-vdp/vcr2) also, I have 2 lines going into the receiver, to the left or right?

  any help would be greatly appreciated.

  p.s. I was earlier & stuck a line from the receiver (vcr2) to the helmet to the front, but he just made a great noise & nothing released that was supposed to - but after that there was no sound does not at all until I rebooted the computer.

  Idnic, welcome to the forum.

  I was able to find a Manual for your receiver on the Internet.  Unfortunately, it is not that it can be connected to a computer.  There was no mention of connecting it to a computer anywhere in the data.  It can be connected to a TV, however.

  If your problem is solved, please click "accept as a Solution.

• F2 and F3 brightness keys not working only not on the DM4-3050US laptop

  I have a Pavilion DM4-3050US laptop.  The brightness keys don't work at all.  All the other function keys work fine, like F9 and F10 to volume.  I looked long and seriously and tried almost all of the solutions that I found, which it which seemed so promising: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Brightness-Controls-Stopped-Working-dm4/m-p/....  Nothing works, however.  I won't do a factory reset - no need to reinstall all the software for the brightness.  I also called HP and they offered replace the laptop, but still once, does not only apply to worsening brightness keys.  Does anyone have any ideas or suggestions?  It must be some sort of bug that HP is aware, no?

  Then work my F2 and F3 keys.   They began to apply when I have connected a Microsoft Comfort Curve keyboard to my laptop.  This prompted Win 7/MS update find software for the keyboard that I downloaded and installed.  After the reboot, I discovered that the F2 and F3 keys now dim and brighten up the screen.  I know that this will not work for others, it seems to be related to the installation of the keyboard software, but he has restored somehow keyboard settings that work even if I'm not using the external keyboard.

• I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and restart

  Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip

  Hello

  Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}

  WARNING: Unable to verify timestamp for ewusbwwan.sys
  ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
  Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)

  ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
  or a device attached to it.

  BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}

  WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
  Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)

  c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.

  This driver update.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  ========================================================

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Updated BIOS, drivers of low level chipset and on-board major
  and drivers of separate devices (see methods of updating driver below).

  BiosVersion = F.03
  BiosReleaseDate = 07/09/2012
  SystemManufacturer = Hewlett-Packard
  SystemProductName = PC HP Pavilion Sleekbook 14
  Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
  SystemVersion = 087F1000003B5900000310100
  SystemSKU = C0P30PA #ACJ
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 18F9
  BaseBoardVersion = 82,12

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  low level chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• Pavilion G6 - 2163sr: Max RAM computer laptop HP Pavilion G6 - 2163sr

  Hello

  I want to improve my laptop for 2 * 8 GB RAM. Motherboard supports this amount of memory?

  So understand, my motherboard model is HP 183rd (U3E1) but I didn't find its specification in the web.

  Thanks in advance.

  Here's the official specs:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03362719

  Basically, the motherboard is the laptop model. Laptops are designed of the earth upward by the manufacturer so there is no separate computer laptop itself set of specifications of the motherboard.

  The specs say 8 maximum of concerts, but it's a 3rd generation of processor Intel Core. However, the maintenance manual, which is usually more reliable than the specifications, said as 8 GB maximum and does not specify a compatible 8-gig module.

  Repair manuals

  Even Crucial said 8 maximum of concerts and they perform ongoing tests because if they can sell you larger modules they want to be able to do.

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Pavilion-G6-2132tx

  So, bottom line, I think it might take 2 x 8 gig modules, but it would be a big gamble and I guess that it can take only 2 x 4 GB.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion A14Ld-550 desktop: this office has a replaceable graphics card?

  The HP Pavilion 550 desktop computer - A14Ld has a replaceable graphics card? I often hear on an integrated graphics card, it is the question that I am trading for this model, and it has 4 GB memory graphics dedicated with AMD Radeon R5 graphics card and an AMD A8-6410 processor, 8 GB of memory and a 1 TB of HDD with Windows 8.1. So, is this model with the characteristics I've listed have his replaced graphics card?

  The answer is NO, because the HP is not a 550-A14Ld graphic slot PCIEx16. The actual GPU is anchored in the CPU chip. The concept is a like a laptop computer in a matter of funds. The real PSU (power supply) is really a brick 65W, very similar to a computer laptop power supply. I'm so glad you asked!

• Connect to a remote computer through Logmein impossible in version 4

  Hi, yesterday I've upgraded to Firefox 4.01. Since I can no longer connect to my remote computer (a computer control a solar panel system) normally I create in my laptop, a window displaying the remote computer via Firefox and Logmein, and I can't access the software from remote computers. In Firefox 4.01, I see a screen, but it's all black and does no access.
  In Safari, everything works fine. No clue why Firefox 4.01 behaves as it does.
  Veuileez
  PC

  I see you are using OSX. Unfortunately, LogMeIn hasn't updated their firefox plugin to be compatible with the version of OSX Firefox 4, only for the version of Windows. If you really need to be able to use LogMeIn with Firefox in the meantime their update their plugin, you could downgrade back to firefox 3.6, or use another browser.

  EDIT: as of yesterday (12/05/11), it seems that LogMeIn has updated his plugin, even if I had not anything on their site as a result of advertising. I was invited for an update, update the plugin and just for fun FF4 tried again and it worked.

• Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Suzanne,

  With the help of a video-to-USB device like the EVGA UV plus + 19 will not damage your computer or HDTV. The EVGA UV + 19 more is an active device and is not just a passive cable. To the best of my knowledge, there is no passive cable which will convert the USB ports in HDMI ports.

  Frank