Equium L20 does not load Windows

Similar Questions

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• Computer does not load Windows after reset after installing HP-J6413

  Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

  Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

  Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

  Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

• Equium P200D - does not load

  I have an Equium P200D who did not pay correctly, I bought a new charger and it worked fine for a while. However I noticed that the laptop has not been held liable. Now the laptop does not load, and even with ac power plugged he won't shoot upward.

  I'm assuming that the battery exceeds the usefulness, but it should not start when plugged into the mains, with battery in or out? So can I assume that support on the laptop is useless?

  any help would be appreciated

  Hi blueknowz,

  > and even with ac power plugged he won't shoot upward.
  This means that the laptop doesn't start over even the AC/DC adapter is connected, right?

  Well, the computer should start even when the AC/DC adapter is connected but the battery is defective. If the battery is not important, you can use Notepad with AC/DC adapter only.

  If the computer laptop doesn t start it looks like a malfunction of the motherboard. It is maybe something wrong with the s load control.
  An accurate diagnosis can be made from an authorized service provider. Do guys say sabout this behavior?

• Computer does not load Windows. (Missing\corrupt file and the disk read error)

  I woke up this morning and my computer screen said:

  "Read a disk error has occurred."
  Press Ctrl + Alt + Delete to restart»

  So I did, and he just keeps it again and again. I turned off my PC, disconnected from the power and took out the battery. EXPECTED, put everything back in and turned on the computer. This time he made a lot of strange beeping noises and took forever and then I got this error:

  "Windows was not start because the following file is missing or damaged:
  \SYSTEM32\NTOSKRNL.exe
  Please reinstall a copy of the above file.

  I pressed on enter and it gave me the error reading disc again.

  Yesterday I updated my BIOS. So I also tried to go to my BIOS screen and "Load factory default settings", but I always get errors that I said just above and windows does not load.

  Help =)

  Hello I would wait until you try to do the repair first

  Make sure that the hd is just a notebook size hd
  Make sure that the speed is the same thing that you already size is really for you
  before you start to have a complete set of installation discs for the mfgr
  If you only use the os disk you will not load the microsoft embedded key encode any additional programs the mfgr installed or modified specially for your computer model and the party in the form of hard disk, you will need to do it yourself the format should be identical to the new factory
  uninstall all the equipment installed after you bought the computer (you must add once installation is complete)

• Samsung laptop computer does not load windows 7, need to reinstall (no cd, no cd key)

  Samsung laptop comes with windows 7, does not load past the bottom (and even in this case, does not load the user/pw. Need to reinstall how? It did not come with a cd key and I tried to go back to the last good config and it did not work (im going with a file corrupt and need a cd key). He gets in the background, but is not past. I want to just reinstall windows 7 home 64 bit, but I miss a cd and don't know how to get the cd or the cd key for it.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Samsung, press F4 to the power upward...

  You will probably find the product key in the compartment to batteries.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Re: Satellite L670D does not load windows

  Hi, I have a toshiba L670D, who recently had a windows update and since then, every time I try to turn it on will not load windows, but just comes up with the error "error fatal c0000034 application update operation 207 0f 102311 (_00000...)"

  Is there anyway I can fix it myself or is it a case of calling an expert or even go shopping for a new?

  Try to start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool.

  Please post comments.

• Satellite L750 - 17 p does not load Windows

  Hi all... I have a Toshiba Satellite L750 - 17 p, since a few days now, when I turn on the PC after the toshiba logo I get the loading screen and the window ms back with the inscription: system32 / drvload.exe
  MS-DOS screen remains empty and the computer doesn't load... could you help me?

  Are able to repair the system using the Windows own repair options?
  I guess you are using Win 7 because this system has been pre-installed by Toshiba.
  Switch on and press F8. Here, you choose the first option called fix my computer.
  Now you should be able to choose between several options. I think you should try the first option that allows you to automatically repair the system.

  If this option does not help, try to set the system on the last good configuration/status running

• Help, please! computer HP laptop g72 does not load windows

  I can't get my laptop to initialize. I was it clean and running virus/spyware scans when it overheated and judgment (something he seems to do more in more often lately), I came back to the room to check on it and he stopped. He gave me the usual message about how he had disappeared in hibernation because the internal temperature exceeded blah blah blah (don't remember exactly what he said, but it wasn't the basics of it) now normally at this stage it will restart and be well and I can continue with what I was doing before. However this time it will not go beyond the second screen. It's what he does... (I will include the information in the end system)

  I press the power button then screen shows the following

  1 HP screen of the logo with the message "Press ESC for Boot Menu" at the bottom left then flashes to the next screen.

  2. starting Acronis Loader...
  Press F11 for Acronis Startup Recovery Manager... (horizontal cursor flashing after...) then flashes to view the first screen again

  and this process is repeated again and again until I got disabling or press ESC to #1 screen or F11 to the screen #2 how it will load either the menu start screen where I can access info sys diagnotics, BIOS or system recovery system.  or Acronis where I can make backup dics or start the Recovery Manager (who I'm trying to deal with the system if that is possible at this time because there are pictures and things on the hard drive that I want not deleted if it can be avoided)

  the process is normal to start but after #2 it should be blank with blinking cursor and then begin loading windows... I cannot at this point. He repeates just the first two times, I let it run for about 10 minutes at a time to see if she would do anything else, and it won't.

  System info-

  portable mode: HP G72 notebook PC (not sure what particular model because I don't know where to find this info)

  System ID: 1425

  Product number: LE846UA #ABA

  Warranty start date: 27/03/2013

  BIOS date: 08/11/2010

  BIOS version: F.26

  Processor type: Intel Pentium CPU [email protected]

  Processor speed: 1866 MHz

  Operating system: Windows 7 premium 64-bit

  I bought this computer used. The battery has never held a charge, I've always had it up to use it, but I don't know if I had to buy a new battery it would probably work. I never had the money to make and never really needed it so never bought.

  I tried to access the BIOS and it requires system administrator password. I tried to enter my password that I used to connect to windows, but that did not work. After 3 tries I have a message to disable the system with [6207076] below.

  Is there someone who can help me to fix it?

  I really don't want System recover unless there is a way to access the LIBRARY (documents, music, pictures) if I can help it. I don't have the ability to transfer all of my photos from my other computer before that happened.

  Please help me!

  Hello

  The code below should allow you access the bios menu:

  76165078

  Once, I would like to delete the password entirely - use the arrow keys to select the Security tab and press ENTER.  Use the arrow keys again to select the admin password option and press ENTER.  Enter the current password (use the above code), and then for the new password, just leave this blank and press on enter – do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Once completed, boot into the bios menu and reset the default settings - it may also be useful running a quick diagnostic on the HARD disk and the memory that is to be found under the Advanced or the diagnosis tab.

  Kind regards

  DP - K

• computer does not load windows xp

  computer will not load in windows sometimes happens at startup repair but still does not work
  Pentium 4

  judged fault dust stop start thank you for your suggestions

• Equium L350 does not load upward

  Hello

  my laptop does not charge upward I can enter in f2 and f12

  I tried to reset it, but in vain.
  I can't access the start on safe mode screen, any help would be appreciated

  p.s fan still work it sounds as if she is trying to load up, but all we get is the black screen.

  >... I cannot go into f2 and f12
  This means you can enter start/settings of BIOS and Toshiba welcome screen menu?

  You can enter boot options using F8 at startup?
  >... all we get is the black screen
  Black screen with cursor flashing in the top left?

• Equium A200 - does not load

  I have Equium A200, been fine until last week

  It will be not just load up unless you really want with force the wire in the connection point. One no matter what idea s power passing by the lead straight up the computer what I tested, and when I finally get it to load it only lasts 30 minutes on a full charge? Be done I ve had almost four years without any problems, but I would like to know if someone has or has had the same problem

  Thank you for taking the time to read this
  Janie

  Hey

  For me it looks like the power cord is broken or it s something wrong with the power connector on mother/computer laptop card.

  Best way to determine what part is causing this problem needs to connect to an AC/DC adapter. If you have a friend with compatible adapter will ask if you can test the adapter on your laptop. In order to check if it s the AC/DC adapter or power connector for laptop.

  I think that in both cases, you need some spare parts and you can get a provider of service authorized in your country. :)

• Computer does not load Windows 7

  Hello

  I was using my computer hp laptop pavilion dv6 and then he got a blue screen with white text (I think the HDD problem, idk)

  I restarted the computer and my computer was not able to load my Windows 7 operating system. I already tried safe mode, I tried the repair option. The computer tried to fix for 7 hours without any result. I already tried reseting with Windows recovery disc, didn't work... Solution?

  (Sorry for English, English is not my main language.)

  WSEOIT wrote:

  Hello

  I was using my computer hp laptop pavilion dv6 and then he got a blue screen with white text (I think the HDD problem, idk)

  I restarted the computer and my computer was not able to load my Windows 7 operating system. I already tried safe mode, I tried the repair option. The computer tried to fix for 7 hours without any result. I already tried reseting with Windows recovery disc, didn't work... Solution?

  (Sorry for English, English is not my main language.)

  Hello

  Well, it seems that the defective material only could be the hard drive. Perhaps it is too damaged a lot to make it work again. Get a new hard drive I guess. You got recovery discs so that there will be no problem to do work again.

• SA40 has no startup options and does not load Windows

  Hello everyone

  I just met my first problems with my SA40-702. I got it about 2 years and everything was fine.

  The machine will not start is no longer in Windows. He's sitting there for hours with the screen of boot of windows XP, the bar of scroll nothing happens. I tried to access the CD/DVD drive to reinstall windows, but I can't boot from it!

  I have had so much try 'C' nothing happens.

  I tried "F12" nothing happens.

  I tried several copies of windows and the boot disks, but there is no success.

  I was in the BIOS and removed the password so it now reads "unregistered" I am unable to change the menu boot options. All that I can change it is time and the password.

  Any help on changing the options of startup, or as to why the machine will not let me choose the CD as boot device would be appreciated.

  Infact I can't choose ANY boot device.

  As far as windows goes all start attempts including safe mode etc do not work. They just plant rather then wait eternally for restart.

  I hope someone can help!

  Thank you
  Richard

  Hello Richard

  Usually, if the supervisor password is set, you can have this kind of problems and you will not be able to enter the BIOS settings. I put t really know if someone put the supervisor password and this way I can't help you.

  You are the owner of this device or using it in your business?

• HP dv6 envy: my laptop turns on but it does not load windows

  Hi, recently my computer has stopped working. It lights up; However, he will just stay at the startup screen until the screen will Dim. I ran the hard drive DST short test and it comes back as being down. My FAILURE ID is 0LGDAJ-6MP82Q-QFPK1A-60TX03 and my PRODUCT ID is C2M16UA #ABA. Can anyone advise me on what I should do? Also can save my files to that hard drive?

  Thank you!

  Hello
  
  Data sheet: http://support.hp.com/us-en/document/c03497843
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c03591281
  
  Please replace the HARD drive failed by a new similar form factor.
  
  Order the HP USB recovery, if you have not created a game for yourself after you set up the laptop.
  Or buy it here:
  http://www.computersurgeons.com/p-23043-Windows-8-64-bit-Supp-1-Recovery-Kit-708588-001-for-HP-envy-notebook-PC-model-number-DV6-7245us.aspx
  
  You can remove the HDD, connect to another PC using SATA USB adapter. Use Windows Explorer and copy the files you need to HARD drive failed.
  
  Concerning
  
  Visruth