Computer newly purchased has been delivered with Vista, but I was assured that I could install Windows 7 after childbirth.

Similar Questions

• Pregnant wireless Bose SoundLink has been integrated with success but don't connect/play audio via Bluetooth

  Separated from this thread.

  How did you get your SoundLink Mini system works? I have the same camera, he paired, but does not connect properly.

  I'm not sure it was a while back, but after having revisited the installation instructions, I think I uninstalled it to devices and printers by selecting 'delete device '.  I think that I also removed from the Blue Tooth device section in Device Manager.  I probably also removed the PC as a device coupled to the BOSE by pressing the bluetooth button on top of the soundlink speaker for I think that something like 5 seconds (see Manual)

  I've then matched again according to the instructions of Bose.  Since then, he has worked perfectly.  I think that they don't make it very clear what is supposed to happen as part of the connection process when you want to use the device.  When the computer is turned on, press the power button on the Soundlink.  There is a small white light above the button on the Bose Blutetooth.  It starts flashing and you will get a single "beep" that it connects, the white light is solid and it is connected

  Hope this might be of some use

• Your message has been sent and saved, but there was an error when executing the message on this topic filters.

  Recently received this message when sending emails. Have no idea why. I use filters for incoming messages but none for the out. In fact, I can't find any place to set filters for the outgoing. Please notify.

  This is a bug that will be fixed in a later version. Even if it's boring, it can be ignored.

• How can I find what version of iTunes has been used with my iPod.

  My computer with the installed iTunes died. I tried to load iTunes in my new computer, and then use it with my iPod and I get the error message that another version of iTunes has been used to record music on my iPod.  The new iTunes wants to erase everything on my iPod and start over.   Is the only place in all the songs I have on my iPod so I don't want to erase it and start over. I need to know what version of iTunes has been used with my iPod, the last time that I've updated so that I can download the version of iTunes and my iPod allows to recover all my songs in iTunes.   In turn if there is a way that I can download all my iPod songs in a folder on the computer and then reload them in iTunes.

  That is to say that a different library was used. The version is not really relevant. If your old computer and new were both running the same version you'd still see the same message unless you have migrated your library or restored a backup. See recover your iTunes from your iPod or an iOS device.

  TT2

• System has been infected with the cuaari.exe Virus. Impossible to delete.

  UNALE to remove hidden files

  I have system has been infected with a virus called cuaari.exe that one of the antivirus is not able to remove.
  The problem is whenever I have connecct to my external hard drive or USB it makes all files as shortcuts, so you can't click on them. from the command prompt I did a "dir / Ah! ' to see the hidden files and I saw cuaari.exe there, but I did"del cuaari.exe"it says unabale to find any file... Please let me know how to remove these viruses type hidden.

  Hi Abhishek,

  ·         What is the antivirus installed on the computer program?

  ·         It is updated with the latest virus definitions?

  You can run the Microsoft to check security scanner for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Also, update the antivirus program on your computer with the latest.

• SQLState HY000 that no request has been performed with this handle

  Hello everyone. I tried to get a working between 11.2 Oracle & PostgreSQL DBLINK. We had a plethora of errors... However, rather than try to explain I will simply display all errors, track & all my settings. All so first of all, here is a quick paste of the error I get.
  I had to cut part of the path for the length. But it repeats a bit
  Thanks in advance for any help.
  
  This is the error we get Oracle Developer program
  
  SQL > /.
  Select * from ods_md__product@denodo_dblink
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  No query has been executed with this handle {HY000, NativeErr = 1} no request has
  been executed with this handle {HY000, NativeErr = 1}
  ORA-02063: preceding 2 lines of DENODO_DBLINK
  
  And this is a rough idea of which comes from the trace.
  
  Entry hgopoer to 16/12 / 07/2012: 12:35
  hgopoer, line 231: had native error 1 and sqlstate HY000; message follows...
  No query has been executed with this handle {HY000, NativeErr = 1} no query has been executed with this handle {HY000, NativeErr = 1}
  Out of hgopoer, rc = 0 to 16/12 / 07/2012: 12:35
  hgopars, line 526: calling SQLNumResultCols obtained sqlstate HY000
  Out of hgopars, rc = 28500 to 16/12 / 07/2012: 12:35 with the ptr error FILE: hgopars.c LINE: 556 FUNCTION: hgopars() ID: preprocess the number of columns
  hostmstr: 0: HOA after hoxpars
  hostmstr: 0: CPP after SQL grouping
  
  
  
  I use Oracle for heterogeneous environments 11.2 on RHEL 5.4
  Connection to Denodo on Windows that use PostgreSQL drivers
  unixODBC 2.2.12
  psqlODBC drivers 08.04.0200
  
  
  ODBC.ini
  
  
  [VDP_acme_DSN]
  Description = connection VDP
  Driver = postgreSQLDriver
  Trace = no
  Trace file = /tmp/trace.log
  Debug = no
  DebugFile = /tmp/debug.log
  Database = aaa_ncnu
  ServerName = *. *. *. *
  User name = admin
  Password = admin
  Port = 9996
  Protocol = 7.4
  ReadOnly = No
  RowVersioning = No
  ShowSystemTables = No
  ShowOidColumn = No
  FakeOidIndex = No
  LFConversion = Yes
  UpdatableCursors = Yes
  BoolsAsChar = Yes
  UniqueIndex = Yes
  ServerType = Postgres
  ConnSettings =
  UseServerSidePrepare = 0
  ByteaAsLongVarBinary = 1
  Optimizer = 0
  Ksqo = 0
  
  [ODBC]
  TraceFile=/tmp/sql.log
  Trace = 1
  
  odbcinst.ini
  [postgreSQLDriver]
  Description = driver PostgreSQL 08.04.0200
  Driver = /usr/local/lib/psqlodbcw.so
  UsageCount = 1
  
  
  initVDP_acme_DSN.ora
  HS_FDS_CONNECT_INFO = VDP_acme_DSN
  HS_FDS_TRACE_LEVEL = DEBUG
  #HS_FDS_TRACE_LEVEL = 255
  HS_FDS_SHAREABLE_NAME = /usr/local/lib/libodbc.so
  HS_LANGUAGE = american_america.we8mswin1252
  
  #
  # ODBC specific environment variables
  #
  Set ODBCINI=/usr/local/etc/odbc.ini
  
  
  tnsnames.ora
  ETLD =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = ETLD)
  )
  )
  
  VDP_acme_DSN =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Localhost)(PORT = 1527))
  (CONNECT_DATA =
  (SERVICE_NAME = VDP_acme_DSN)
  )
  (HS = OK)
  )
  
  listener.ora * bold * "BOLD"
  
  
  
  LISTENER_TG =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = PNPKEY))
  (ADDRESS = (PROTOCOL = tcp (PORT = 1527))(HOST=localhost))
  )
  SID_LIST_LISTENER_TG =
  
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = VDP_acme_DSN)
  (ORACLE_HOME = / app/oracle/product/11.2/tghome_1)
  
  (ENV="LD_LIBRARY_PATH=/usr/local/lib:/app/oracle/product/11.2/tghome_1/lib')
  (Program = dg4odbc))
  )
  
  
  I've posted a copy of my oracle on pastebin trace cause of length
  
  http://pastebin.com/2qbgJL03
  
  Even with my ODBC trace
  
  http://pastebin.com/2FU9nRCS

  The odbc trace that shows:
  [ODBC] [6347] [SQLPrepare.c] [192]
  Entry:
  Statement = 0xde51420
  SQL = [SELECT A1. "" prd_cd ", A1. "" prd_dsc ", A1. "" ld_dt ", A1. "" updt_dt ", A1. "" prd_ln_dsc ", A1. "" prd_ln_cd ", A1. "" ln_bus_cd ", A1. "" ln_bus_dsc ", A1. ["co_num...] [length = 201]
  [ODBC] [6347] [SQLPrepare.c] [367]
  Output: [SQL_SUCCESS]
  [ODBC] [6347] [SQLNumResultCols.c] [149]
  Entry:
  Statement = 0xde51420
  Number of columns = 0xde16fa8
  [ODBC] [6347] [SQLNumResultCols.c] [234]
  Output: [SQL_ERROR]
  Count = 0xde16fa8-> 0
  DIAG [HY000] no query has been executed with this handle

  =>, it seems that the Postgres ODBC driver you are using has a few problems with the SQLNumResultCols function. Your current version of the ODBC driver is psqlodbcw.so, DriverVer:08.04.0200, and there are new drivers available. Can you please get the latest ODBC driver and check again?

• None of my apps work after that my laptop has been infected with the virus Vista Internet Security 2010,

  Hi all
  I need help to get my computer back to normal.

  My laptop has been infected with the virus Vista Internet Security 2010, but I removed it, NOW none of my apps (Yahoo Messenger, trash, other folders, SYSTEM, all file icons restore,) work, I managed to get rid of the virus visa, but still none of the programs work. When I try to open any program, it displays an error message "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel. " I did all the steps, but still nothing works now all my files are open with the same file. I try to download a program to fix this problem, but I'm not able to run cause keep giving me the same error and cannot download anything. Is it possible to recover my computer as usual. Any help much appreciated.
  Help, please.
  Oh also all the icons on my destop are replaced by the same feacture of icon, but the name of the icons are staying same.if it shows adobe icon and all icons are adobe, when I open it with ie, then everything will change IE also. even if the opening programme has also changed to the same icon as dekstop one. now all my things are open with yahoo messenger:(c'est fou:()

  Try restarting your PC and press the F8 key repeatedly and then start in safe mode with networking and download and comprehensive performance analysis with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If this does not work, try to run Windows Defender version offline beta:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  You can take a look at:

  http://cyberdefend.WordPress.com/2012/01/07/boot-Windows-for-scan/

  If the problem has not resolved, then contact Support for Microsoft Security:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&task=Diagnostics&mkt=en-us&St=1&wfxredirect=1

• Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  This kind of message is a scam. Do not meet it.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

• I'm on an old computer with microsoft XP, it has been so long since I used it, one that I forgot my password can someone tell me how to reset the password?

  I'm on an old computer with Microsoft Windows XP, it has been so long since I used it, one that I forgot my password can someone tell me how to reset the password?

  Hello

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• My computer has been infected with a virus by asking me to download windows xp for $59 virus software.

  original title: anti-spyware in Microsoft windows xp

  My computer has been infected with a virus by asking me to download windows xp for $59 virus software. Whenever I tried to load the antivirus software, or similar, I saw in the 'my windows task manager process windows' image or start whd.exe process name my software would be closed and a screen could come that had microsoft images etc on this subject. He asked me to sign up or enter my code', that I could download for $59. I managed to fix it myself, but before I did I sent an email to their 'support center' telling them that I was going to find and to make their visit for wasting my time! I put a contactable email address down and got one got a naughty response. Hello sorry, but there is no payments with your email. Please send me your e-mail to registration or transaction ID thank you and have a great day! email address * address email is removed from the privacy * who can I send this on, it was a scam and for someone who has no idea about computers, they would have to pay somethig to someone to fix it. enough of these people, they need to be stopped.

  Its fake. Follow this. It may be similar to the following

• Windows vista the task image is corrupt or has been tampered with (0 x 80041321) Please try again.

  Windows vista the task image is corrupt or has been tampered with (0 x 80041321) Please try again.

  This happened after Windows update

  and no solutions yet!

  Dear Marilyn

  nothing worked, finally I deleted KB2305420

  now everything is OK

  Anyway thanks for your help

  SINA

• Whenever I log on my computer, I get this 'Security warning' box you want vview only the content of the Web page that has been delivered safely

  Whenever I log on my computer, I get this 'Security warning' box you want vview only the content of the Web page that has been delivered safely?

  Open ie9,

  Click on the gear in the top right, symbol

  Click on Internet options,

  The custom level button and security section

  Scroll down and check the box

  Allow the display of mixed content.

  Apply and OK.

• Impossible to create a point of restoration with the error message "task Mgr is damaged or has been tampered with. 0 x 80041321 ".

  Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic

  I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem

  Hello
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
   
  
  Please follow the methods and mark the question below:
   
   
  Method 1:
   
   
  I suggest you try the steps mentioned below.

  Steps to re-create the Task Scheduler:

   
  a. Click Start; in the start search type regedit.exe and press ENTER.

  If you receive a consent prompt, click Yes.

  b. navigate to the following location.

  HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.

  c. save the changes and then close the registry editor.

  Now check if the Task Scheduler works.
   
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  
   
   
  Method 2:
   
   
  Step 1:
   
   
  I first suggest you to check if the Volume Shadow Copy service is running.

  a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.

  b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.

  c. If it is stopped, select start or restart.

  Check if you can try to create restore points after starting the service

   
  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Step 2:

   
  If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.
   
   
  Disable the antivirus software:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 3:
   
   
   
  You can also try to remove the job from the location:

  C:\Windows\System32\Tasks

   
   
  How to find which task is damaged or altered.

  a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
  b. now run the following command

  schtasks/query | findstr /i

  Search

  ERROR: The task image is corrupt or has been tampered with.
  ERROR: Task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  
  a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. the component shares of the Scheduler dialog box, click on create a task and check.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Error opening Task Scheduler: "task image is corrupt or has been tampered with. mcupdate.

  original title: Hello! When I open the task schedule that I get the following error, task image is corrupt or has been tampered with. mcupdate "windows vista home premium SP2" tried various solutions can help.

  cannot say exactly how much time I had this problem when I'm browsing I get windows does not quite agree FAQ

  and when I'm srolling on a website that the page will start to develop until you can't do anything about this page, I have to continualy do right click and update

  After a few seconds, I update again. I use norton 360,6 internet security and norton utilities, I do not know if what I am about to talk about has a prevalence.

  about 2-3 months, I bought Uniblue powersuite, is not thinking that he could not work along side norton360 and utility. I uninstalled Uniblue powersuite:

  as you know that uniblue accelerates, cleans your registry and defragments Tweeks your computer, as well as of other activities.

  I tried windows help and support guide to find a solution, probably do not know what are the things to try.

  can help you.  or it's back to factory reset!

  Hello

  I suggest you perform the steps mentioned in the link.

  task image is corrupt or has been tampered with. mcupdate

  Explorer Windows does not

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Internet Explorer 9 is also compatible with Vista. If youstill would like to Uninstall IE9, follow the steps described in this document.

• Error "task BackgroundConfigSurveyor: the task image is damaged or has been tampered with." When I click on Task Scheduler

  Original title:

  When I clicked on Task Scheduler I got the following error message: "BackgroundConfigSurveyor of the task: the task image is damaged or has been tampered with."

  When I click on the OK button and try to go I had error messages and I need to get out the Task Scheduler.  I tried to fix by restarting my computer once again by clicking Task Scheduler - result error messages persist.  Help!  How can I 'corrupt' Task Scheduler?  Please give me detailed instructions.

  Hello

  You did changes to the computer, before the show?

  Method 1:

  Run System File Checker analysis and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Check out the following link.

  MS10-092: vulnerability in Task Scheduler could allow elevation of privileges