Computer Pavilion laptop zv5000 - driver to SDHC card 4-8 GB

looking for a driver that will allow my system to handle SDHC card 4-8 GB

Yes! Surly... a USB card reader will read SDHC cards...

Tags: Notebooks

Similar Questions

  • Pavilion g6 - 2400ca: installing drivers for windows 7 on the computer pavilion laptop g6 - 2400ca

    Hello

    I just installed windows 7 instead of windows 8 on my computer pavilion laptop g6 2400 ca, and I'm missing some drivers.

    Here is the necessary drivers, can help you please?

    Bluetooth controller:

    PCI\VEN_1814 & DEV_3298 & REV_00

    PCI\VEN_1814 & DEV_3298

    PCI\VEN_1814 & CC_0D1100

    PCI\VEN_1814 & CC_0D11

    PCI\VEN_1814

    PCI\CC_0D1100

    PCI\CC_0D11

    Network controller:

    PCI\VEN_1814 & DEV_3290 & REV_00

    PCI\VEN_1814 & DEV_3290

    PCI\VEN_1814 & CC_028000

    PCI\VEN_1814 & CC_0280

    PCI\VEN_1814

    PCI\CC_028000

    PCI\CC_0280

    Ethernet controller:

    PCI\VEN_10EC & DEV_8136 & REV_05

    PCI\VEN_10EC & DEV_8136

    PCI\VEN_10EC & CC_020000

    PCI\VEN_10EC & CC_0200

    PCI\VEN_10EC

    PCI\CC_020000

    PCI\CC_0200

    Unknown device:

    ACPI\HPQ0004

    * HPQ0004

    PCI device:

    PCI\VEN_10EC & DEV_5229 & REV_01

    PCI\VEN_10EC & DEV_5229

    PCI\VEN_10EC & CC_FF0000

    PCI\VEN_10EC & CC_FF00

    PCI\VEN_10EC

    PCI\CC_FF0000

    PCI\CC_FF00

    WD SES peripheral USB controller:

    USBSTOR\Other

    USBSTOR\RAW

    Hello

    Install:

    RALink Bluetooth 4.0
    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59632.exe

    RALink 802.11 b/g/n
    http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61580.exe

    Realtek PCIe GBE Family Controller drivers in the series

    HP ProtectSmart hard drive protection

    Realtek PCIE card reader drivers

  • need windows 7-64 bit drivers for computer pavilion laptop 17-e004ed

    Installed Windows 7 / 64 bit computer pavilion laptop 17-e004ed. Need windows 7 / 64-bit drivers for hardware parts. Any suggestions?

    Thank you.

    Hello:

    You should be able to use all the W7 x 64 drivers and software for this model.

    Your model uses the Intel HD graphics driver.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & docname = c04104419 & LC = on & os = 4063 & Product = 6622225 & sw_lang = & #n262

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  • Boot MGR is missing on the computer pavilion laptop G6-1311sa

    I had a problem with my G6-1311sa pavilion laptop with windows 7 Home premium 64-bit, got the error message saying hard drive failed

    I contacted hp and they sent me a new HARD drive and 4 cd, 1 was a recovery cd and 3 others I do not remember what they are for, think that's also part of the recovery package.

    After replacing the old HDD with the new 1, I turned on the laptop and tested the new HARD drive and memory, they both passed.

    If I put the recovery cd and everything is fine, even got the message saying that the recovery is complete, restart

    When I restarted it I put the cd 1 of 3 in and he had 3 parts to load, to restore factory settings (I think he said that) copy the files needed for the restoration of ard drive and copy the files on hard drive, it passes through the 1st stage without problem but then sticks to 24%, whenever he tries to copy the files and gives me this message : copy files is not D:\PRELOAD\BASE19. Management of stormwater to C:\RM\image\BASE19. STORMWATER MANAGEMENT

    now, I tried 4 times with the same result.

    What should I do? Help, please

    Hello shaar100,

    Take a look at this link http://goo.gl/XQZg8

    It will take you to a thread with the steps and processes for the problem you are experiencing.

    Please let me know if this helps solve your problem.

  • sound does not come on the computer pavilion laptop

    I was using my computer when there was a popup for an update from hp. I've updated and then restarted the computer, but there was not his coming out. everything worked well, just noise. On the small speaker mixer microphone icon shows that he has his fate. even when I adjust the volume the ping that is supposed to be heard is not there, but it shows as green and spikes to show that there is a sound that is supposed to be there. How can I fix it?

    "Laptop HP Pavilion dm4-2191us

    Product number: QE382UA

    Hello

    Try the following.

    Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

    IDT Audio Driver - Windows 8.

    IDT Audio Driver - Windows 7.

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • Computer Pavilion laptop will not turn on black screen

    Hello

    I just turned on my computer laptop pavilion dv6 (almost three years), and it does not start. Instead, I got a blackscreen.

    The capital block and the keypad lights turn on and off all the time, but I can't do anything. I can't enter the bios, the recovery or anything like that. My computer just seems to be in limbo, and I can only turn it off by pressing the power button.

    I have windows 7.

    Thank you very much for your support

    Hello cristiaan4,

    Welcome to the HP Forums! I hope you enjoy your stay.

    I understand your computer screen is blank and there are LED turn signals. I will do my best to help you, and I apologize for the delay.

    To fix this, I encourage you to please try the steps outlined in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

    This document you will help idenfying the source of the problem and can suggest many corrections. I believe that the problem can be solved by trying these steps. If this is not the case, the computer doesn't have a hardware problem. To remedy, please contact HP telephone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

    I hope this information helps you. Please let me know your results. Thanks for posting on the HP Forums. Have a great day!

    Mario

  • Pavilion 2 10 x *: differences between models of 10 computer pavilion laptop x 2 2 - in1

    Hello

    I'm seriously considering buying a 2 in 1 laptop - HP Pavilion x 2 10 "device, but I'm confused by several different model numbers, and what mean differences. Can someone help please let me know how the following model numbers differ each other? Thanks, Lou

    HP Pavilion x 2 10-n055na

    HP Pavilion x 2 10-n005na

    HP Pavilion x 2 10-n002na

    HP Pavilion x 2 10-n102na

    Hello

    Means simply more or less options (such as the CPU, RAM, wireless card) with the same basic elements. You can see for example

    HP Pavilion x 10 2-n055na:

    http://support.HP.com/au-en/document/c04759985

    HP Pavilion x 10 2-n005na:

    http://support.HP.com/us-en/document/c04763428

    Kind regards.

  • Why my computer pavilion laptop, it starts and seconds later, just stops

    Im working on a pavilion entertainment pc and when I go to boot it it stays on for a brief second then stops I was wondering why its done this for as far as I know nobody has never opened to make adjustments

    Hey Sonny.

    There are a ton of questions that could cause this. The most common is a failing hard drive or it overheats. Since its only on a brief second I would try a hard reset, followed by the disk hard self-test.

    Perform a hard disk of that test
    Hard reset your laptop

    I would like to know if one of these help.

    Thank you
    Sean

  • drivers for computer pavilion laptop 15 PC 15-n040sx

    I installed Windows 8 Pro on my "Pavilion 15 laptop PC 15-n040sx" and was able to block all the drivers, but one.  Can you help me to find it

    Cockpit: SM Bus controller

    Hardware ID:

    PCI\VEN_8086 & DEV_9C22 & SUBSYS_2166103C & REV_04

    PCI\VEN_8086 & DEV_9C22 & SUBSYS_2166103C

    PCI\VEN_8086 & DEV_9C22 & CC_0C0500

    PCI\VEN_8086 & DEV_9C22 & CC_0C05

    Hello:

    You must install the driver from the Intel chipset from the link below.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  • Computer Pavilion laptop suddenly stops.

    Computer work.  All of a sudden the screen is black, button / stop is on all the others do not. Have to stop with the button. Reset.   No other way to resart it.    HP Pavilion Windows vista laptop.

    Vicki72 wrote:

    HP pavilion dv7 Vista Microsoft Security Essentials.  No changes or software added.  Seems that since I'm the new Office Chair and plastic under Presidency happens when sometimes I touch the edge.  But if I express the touch, it happens.   It is not superheated and works fine most of the time.  Thanks for the reply

    OK if everything works before I would say that your Chair plastic causing an electrostatic discharge and it is going through your computer and causing spikes and he thinks that there is a surge and causing it to stop. You have to find a Chair not static plasic or you'll have a short-lived mobile soon. Touch the edge is a discharge electrostatic transfer into the computer and it detects more tension and stop to protect themselves. It's like walking with socks on the carpet a touch a doorknob in metal and you will allow a "Zap" is an electrostatic discharge and what id hit your laptop and it will make short work (pun intended) of you laptop.

  • Computer pavilion laptop i7 incredibly slow

    Hi, I have a hp pavilion 2321ss g6 with a processor intel core i7. I had for about 2 years. It had not occurred to me to use this forum til now.

    Initially, he had run on win8, but he was almost inoperative (very slow) and I have upgraded to windows 10.

    As I installed the new computer system was incredibly slow and lazy. Opening a program, for example a browser may take more than a minute, making it unusable. Old computers are faster. I think all the updates on the system are made.

    Startup time is 300 seconds, and after that start it does not work well, on the contrary, it takes time to "warm up".

    What can I do?

    Thank you

    Lisa

    Please follow the troubleshooting and suggestions to this sticky following.

    http://h30434.www3.HP.com/T5/Notebook-software-and-how-to-questions/my-computer-is-running-slow/m-p/5599548#M206024

  • Media Player plays is not dvd-computer pavilion laptop w/window g7

    A couple of days, I downloaded a purple ultra movie now when I try to play a dvd, I get an error message indicating there is a problem with the digital copy between my dvd player, decoder, and video card protection. She also tell me to install a driver for my graphic card updated.  How and where can I get a driver and what happens to the driver, I got? I am confused on this one.

    Hello

    You have a few options as I see it please find the steps and the Web link below might help you solve your problem on your device.

    (1) try to do a system restore to this day where unit was working fine.

    (2) dependencies, try the link given below if the restore does not resolve your problem.

    http://www.howtogeek.com/HOWTO/26107/how-to-reinstall-Windows-Media-Player-in-Windows-7-to-solve-problems/

  • Power on password on the computer pavilion laptop

    Help, please!

    My laptop (pavilion g4) application for administration or power on password (that I don't remember). After trying several times, it shows this message:

    System disabled: 81203610

    Thank you!

    Hello

    Try this: 34161236

    Use the posted above unlock code to access the BIOS

    Disable all passwords that are enabled

    If current password request - type the unlock code

    New password, simply press the ENTER key
    Repeat the same thing to check the password column.

    Then exit the BIOS saving & exit option to save the changes.

  • Computer pavilion laptop dv7 4170ez restarts unexpectedly

    Hello!

    I have laptop quite new (2 months) and have problems with it. In the first week, there's this unexpected restart, which is really annoying, because it's sometimes five minutes and sometimes after several hours. I got it on the HP service for 2 times, fira they gave me new hard drive, and the second time thay changed the CPU. But the problem persists. I also updated the BIOS and installed hp dvd windows. Now, I then 30 more mistakes in the last 30 days.

    When I check the eventviewer, I see critical errors, core power 41. For it restarts every time.

    Do you have any suggestions? Is it possible that it is a mistake that has this comuter, or it can be removed?

    Thanks, Geraldine

    Hello!

    I solved this problem by replacing a single bar of ram. I tried every ram separately, tested both separately and discovered that one didn't work at all. If Hp just sent me a new ram and since it works very well.

  • Computer pavilion laptop G6 - printer does not print

    I have laptop which is wireless and my other computer is on my desk and is connected via a cable internet through the router.   On my desktop, the printer indicates very well, loan and work and I can print, but the laptop says printer offline.   I have checked all cables, etc., but don't know how to get to the printer.

    Hello

    Please contact the Microsoft Community.

    I would have you try the doctor print from here.

    See also article-

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Back to us for any issues related to Windows in the future. We will be happy to help you.

Maybe you are looking for

  • Why TB can not show to every email received separately in the Inbox?

    I keep on the lack of new messages received. In addition, they are a total nuisance. Surely if they are needed in some applications, so users should be able to choose if they want the feature or not?

  • site Web of PC mobile display instead of office.

    OK I use my android phone like hotspot on my laptop, I changed my user agent for use cell phone so my operator don't me kick in offline mode, but my searches are coming in the example to display mobile I cause Hulu watch cant think im on a mobile lap

  • How can I restore my tabs closed when I do not have sessionstore.bak?

    I recently lost my session that took a lot of tabs (Version 20.0.1). I have "view my tabs from last time" checked. A system failure a thunderstorm caused a shutdown of the computer. When I loaded it up, I got without tab, only the homepage of Mozilla

  • HP 350 G1F7Y99EA: update BIOS HP 350 f.11 to f.12 G1

    For 3 months I have a HP 350 G1 F7Y99EA, which has been transformed into 8 GB and a Kingston mS200 SSD 120 GB mSata has been added as well. My system drive is on the HARD drive but the OS (Win7 pro x 64) is on the SSD and I start from there. I have 4

  • Backup error of waveform of 380 TDS in spreadsheet

    Hello I tried to record the signals generated by TkTDS 3xx read Waveform.vi a worksheet or Excel. I tried to use "write waveforms to file.vi. However, this error was encountered, ""you have connected 2 terminals of different type. " The type of the s