Why my computer pavilion laptop, it starts and seconds later, just stops

Similar Questions

• computer HP laptop dv6915 starts and stops over and over again, black screen

  I looked a few things on the line and concluded that Bravo had some good info. I tried most of it and all I could get to work, it was to store the windows key and I think b, at the same time and got a code out of it .one long beep and 2 short beeps. is what code?

  http://www.computerhope.com/beep.htm

  It looks like a video problem.

• need windows 7-64 bit drivers for computer pavilion laptop 17-e004ed

  Installed Windows 7 / 64 bit computer pavilion laptop 17-e004ed. Need windows 7 / 64-bit drivers for hardware parts. Any suggestions?

  Thank you.

  Hello:

  You should be able to use all the W7 x 64 drivers and software for this model.

  Your model uses the Intel HD graphics driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & docname = c04104419 & LC = on & os = 4063 & Product = 6622225 & sw_lang = & #n262

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

• Pavilion g6 - 2400ca: installing drivers for windows 7 on the computer pavilion laptop g6 - 2400ca

  Hello

  I just installed windows 7 instead of windows 8 on my computer pavilion laptop g6 2400 ca, and I'm missing some drivers.

  Here is the necessary drivers, can help you please?

  Bluetooth controller:

  PCI\VEN_1814 & DEV_3298 & REV_00

  PCI\VEN_1814 & DEV_3298

  PCI\VEN_1814 & CC_0D1100

  PCI\VEN_1814 & CC_0D11

  PCI\VEN_1814

  PCI\CC_0D1100

  PCI\CC_0D11

  Network controller:

  PCI\VEN_1814 & DEV_3290 & REV_00

  PCI\VEN_1814 & DEV_3290

  PCI\VEN_1814 & CC_028000

  PCI\VEN_1814 & CC_0280

  PCI\VEN_1814

  PCI\CC_028000

  PCI\CC_0280

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & REV_05

  PCI\VEN_10EC & DEV_8136

  PCI\VEN_10EC & CC_020000

  PCI\VEN_10EC & CC_0200

  PCI\VEN_10EC

  PCI\CC_020000

  PCI\CC_0200

  Unknown device:

  ACPI\HPQ0004

  * HPQ0004

  PCI device:

  PCI\VEN_10EC & DEV_5229 & REV_01

  PCI\VEN_10EC & DEV_5229

  PCI\VEN_10EC & CC_FF0000

  PCI\VEN_10EC & CC_FF00

  PCI\VEN_10EC

  PCI\CC_FF0000

  PCI\CC_FF00

  WD SES peripheral USB controller:

  USBSTOR\Other

  USBSTOR\RAW

  Hello

  Install:

  RALink Bluetooth 4.0
  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59632.exe

  RALink 802.11 b/g/n
  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61580.exe

  Realtek PCIe GBE Family Controller drivers in the series

  HP ProtectSmart hard drive protection

  Realtek PCIE card reader drivers

• sound does not come on the computer pavilion laptop

  I was using my computer when there was a popup for an update from hp. I've updated and then restarted the computer, but there was not his coming out. everything worked well, just noise. On the small speaker mixer microphone icon shows that he has his fate. even when I adjust the volume the ping that is supposed to be heard is not there, but it shows as green and spikes to show that there is a sound that is supposed to be there. How can I fix it?

  "Laptop HP Pavilion dm4-2191us

  Product number: QE382UA

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 8.

  IDT Audio Driver - Windows 7.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Computer pavilion laptop i7 incredibly slow

  Hi, I have a hp pavilion 2321ss g6 with a processor intel core i7. I had for about 2 years. It had not occurred to me to use this forum til now.

  Initially, he had run on win8, but he was almost inoperative (very slow) and I have upgraded to windows 10.

  As I installed the new computer system was incredibly slow and lazy. Opening a program, for example a browser may take more than a minute, making it unusable. Old computers are faster. I think all the updates on the system are made.

  Startup time is 300 seconds, and after that start it does not work well, on the contrary, it takes time to "warm up".

  What can I do?

  Thank you

  Lisa

  Please follow the troubleshooting and suggestions to this sticky following.

  http://h30434.www3.HP.com/T5/Notebook-software-and-how-to-questions/my-computer-is-running-slow/m-p/5599548#M206024

• Computer Pavilion laptop suddenly stops.

  Computer work.  All of a sudden the screen is black, button / stop is on all the others do not. Have to stop with the button. Reset.   No other way to resart it.    HP Pavilion Windows vista laptop.

  Vicki72 wrote:

  HP pavilion dv7 Vista Microsoft Security Essentials.  No changes or software added.  Seems that since I'm the new Office Chair and plastic under Presidency happens when sometimes I touch the edge.  But if I express the touch, it happens.   It is not superheated and works fine most of the time.  Thanks for the reply

  OK if everything works before I would say that your Chair plastic causing an electrostatic discharge and it is going through your computer and causing spikes and he thinks that there is a surge and causing it to stop. You have to find a Chair not static plasic or you'll have a short-lived mobile soon. Touch the edge is a discharge electrostatic transfer into the computer and it detects more tension and stop to protect themselves. It's like walking with socks on the carpet a touch a doorknob in metal and you will allow a "Zap" is an electrostatic discharge and what id hit your laptop and it will make short work (pun intended) of you laptop.

• Windows XP computer is slow to start and stop.

  original title: PC is VERY slow

  It takes awhile to start and turns off, surfing is quite slow as well. How do I speed it up?

  Some reasons for the slow pace of the computer:

  1. computer has not been maintained - http://www.elephantboycomputers.com/page2.html#Maintenance

  2. the computer is infected with the malware - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  3. the disk is too full. Remove useless stuff, uninstall unused programs. Do not forget to save!
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  4. flaky third party software. Toolbars and modules are particularly guilty in this area. Uninstall toolbars (Google, Yahoo, ISP brand, etc) and look at what modules are in use in your browser (s).

  5. computer has too many unnecessary programs/processes running in the background. Manage your Startup:

  For XP - How to troubleshoot using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  For Vista/Windows7 - Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '. Autoruns is also very useful.

  6. the user runs an inflated/invasive such as Norton and McAfee antivirus program. Replace it with a better program. I recommend NOD32 (commercial) or Avast (free). Avira is also good, but the free version has an unpleasant reminder screen (Google for instructions on how to disable it). The user can also run several real-time antivirus/firewall/security programs.

  7. the user has installed new programs that are processor and/or memory-intensive (Photoshop, AutoCAD, Mathmatica or similar) and does not have the power of the equipment.

  8 drive fails and is in PIO Mode (IDE only - not applicable for disks SATA drives). It's very much slow (like being in 1985). See Hans-Georg Michna here information -http://winhlp.com/?q=node/10

  If the hotfix registry PIO only 'glue' (or you have a SATA drive), the drive is probably faulty and needs to be tested.
  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  In addition to the above, see also http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

  Note: If the computer has always been slow, in addition to the above user may have bought a machine with a less powerful processor and not enough RAM (memory). The normal use of the computer, 512 MB to 1 GB is sufficient for XP; Vista should have a minimum of 2 GB; Windows 7 is less demanding than Vista, but the minimum of 2 GB should also be used.
  MS - MVP - Elephant Boy computers - don't panic!

• Boot MGR is missing on the computer pavilion laptop G6-1311sa

  I had a problem with my G6-1311sa pavilion laptop with windows 7 Home premium 64-bit, got the error message saying hard drive failed

  I contacted hp and they sent me a new HARD drive and 4 cd, 1 was a recovery cd and 3 others I do not remember what they are for, think that's also part of the recovery package.

  After replacing the old HDD with the new 1, I turned on the laptop and tested the new HARD drive and memory, they both passed.

  If I put the recovery cd and everything is fine, even got the message saying that the recovery is complete, restart

  When I restarted it I put the cd 1 of 3 in and he had 3 parts to load, to restore factory settings (I think he said that) copy the files needed for the restoration of ard drive and copy the files on hard drive, it passes through the 1st stage without problem but then sticks to 24%, whenever he tries to copy the files and gives me this message : copy files is not D:\PRELOAD\BASE19. Management of stormwater to C:\RM\image\BASE19. STORMWATER MANAGEMENT

  now, I tried 4 times with the same result.

  What should I do? Help, please

  Hello shaar100,

  Take a look at this link http://goo.gl/XQZg8

  It will take you to a thread with the steps and processes for the problem you are experiencing.

  Please let me know if this helps solve your problem.

• Computer pavilion laptop G6 - printer does not print

  I have laptop which is wireless and my other computer is on my desk and is connected via a cable internet through the router.   On my desktop, the printer indicates very well, loan and work and I can print, but the laptop says printer offline.   I have checked all cables, etc., but don't know how to get to the printer.

  Hello

  Please contact the Microsoft Community.

  I would have you try the doctor print from here.

  See also article-

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• computer automatically opens Internet start up how can I stop this? When I would use the computer and open internet when I'm ready to use it

  computer will automatically connect to IE start up how can I stop this.

  When I would use the computer and open IE when I'm ready to use it.

  I have a ZYXEL router.

  This has happened only since I checked a pop box that says connect automatically very stupid, I know, but now can not cancel.

  help please

  Hi Tansy,

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I understand that you want to disable the open Internet Explorer at startup option.

  Method 1
  Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem is solved in SafeMode with networking, then I suggest to perform clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  See also: Stop a program from running automatically when Windows starts
  http://Windows.Microsoft.com/en-in/Windows7/stop-a-program-from-running-automatically-when-Windows-starts

  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you

• How do I reset my computer new laptop without password and remove account that does not belong me

  I got my laptop back to scambag, I can just turn on and off my laptop now, been trying to recover and return to the point before stolen, but that CAC always there with the locked password. What can I do?

  Try typing in the F11 key immediately after powering on - choose Recovery - no system system restore.

• Start a second vi without stop (pause) the main vi

  Hallo,

  I would like to start a second a main vi vi. The second vi should run separately so that the user could use functions in hand-vi and the "child-vi.

  Thank you for your help.

  Letting go

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=412491#M412491

  Have a look: you'll just need to re - use 'DynamicVI_Launcher.vi '! :-)

• 15 n series Pavilion: Pavilion 15 computer n097sa laptop. L and R audio that passes through the two speakers at the same time.

  Hi, so basically, I just upgraded to this laptop 15 n097sa (new to me) of my old sucks, and it's so much better.
  Only, I just noticed that when his left or right is out at the same time the two speakers. I noticed you access with your headphones. the left certainly comes out the left a little more and the right thus respectively, but they always come out of two speakers much.
  To clarify that, the only left channel is coming from the two speakers at the same time, instead of just the left speaker. And similarly for the right channel.
  I only did a real test on youtube videos of stereo test, even I tested it on my old acer before, that came out of the correct speakers.
  I have a sound dts, no matter who is and it could be reduced to just change the settings, but I don't think that's it.
  Does anyone else have or had this problem too?
  I know I'm a sucker for pc, but please go steady on me, your.
  Win pro 8.1.

  will you please and thank you very much indeed, couch.

  Malygris1 wrote:

  Hi there @SofaQueue

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with the audio balance on your laptop, and I am happy to help you with this. First of all, I would say reinstall the audio driver.

  ETC.

  Let me know if you still have problems and view the details of what happens.

  I will mark it as resolved now. Very useful, thanks.
  What I found was the following: I have really no problem at all, it was the parameters of the audio DTS after all.
  Simply turn off the audio improvements and testing showed once again that's all it was.
  

  Thanks again though, nice to see people are willing to help so much!

  Edit: Is PS it OK to mark my answer as a solution? I don't care if or whatnot, it just is the right answer and makes sense. I'll do it if he lets me.

• Computer Pavilion laptop will not turn on black screen

  Hello

  I just turned on my computer laptop pavilion dv6 (almost three years), and it does not start. Instead, I got a blackscreen.

  The capital block and the keypad lights turn on and off all the time, but I can't do anything. I can't enter the bios, the recovery or anything like that. My computer just seems to be in limbo, and I can only turn it off by pressing the power button.

  I have windows 7.

  Thank you very much for your support

  Hello cristiaan4,

  Welcome to the HP Forums! I hope you enjoy your stay.

  I understand your computer screen is blank and there are LED turn signals. I will do my best to help you, and I apologize for the delay.

  To fix this, I encourage you to please try the steps outlined in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

  This document you will help idenfying the source of the problem and can suggest many corrections. I believe that the problem can be solved by trying these steps. If this is not the case, the computer doesn't have a hardware problem. To remedy, please contact HP telephone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  I hope this information helps you. Please let me know your results. Thanks for posting on the HP Forums. Have a great day!

  Mario