Computer problems after updates 2/8

Similar Questions

• HD T410s graphic problem after update

  A few days ago, I decided to update my 2011 T410s by Lenovo
  Toolbox. I was looking for solutions to improve the battery life. I have
  has chosen to update all 'important' and some option updates
  those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)

  Since I have lived a graphic break several times when I watch videos online such as
  thedailyshow.com or youtube.com. The first time a
  a message on the graphics driver (or something like that)
  has stopped working and has been restored but the next second the
  ventilation was repeated, monitor would go black and the
  graphics would begin slowly reappear, I'd still get a message
  on the graphics driver and the other second monitor would again
  black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
  the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.

  Suggestions? Is someone else had problems after updating?

  Please uninstall the display driver, and reinstall.

  Also, install the latest player adobe flash.

  Please watch the video file online and then check it in.

  Best regards

  Tanuj

• COMPUTER CRASHES AFTER UPDATE TO SERVICE PACK 2

  My computer crashes after updating windows service pack 2 for windows vista. I conducted analyses of virus and I'm virus-free. So, what can be the problem. I even restored the computer and updates appear and disappear until I update. I need help I have final exams in 3 days!

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used it without a problem after update 2015 cc adobe photoshop

  Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used without any problem after update 2015 cc adobe photoshop...

  Just installed 9.4 ACR it works for my RAW files. Camera Raw 9.4 now available

  And the following cc 2015 windows updates installed.

  Updates Windows Photoshop CC 2015
  File download	Size	Date	Notes
  Update Adobe Photoshop CC 2015.1.2 (64-bit)	352 MB	20/01/2016	16.1.2 release
  Update Adobe Photoshop CC 2015.1.1 (64-bit)	352 MB	14/12/2015	16.1.1 release
  Adobe Photoshop CC 2015.1 update (64-bit)	352 MB	30/11/2015	16.1 release
  Update Adobe Photoshop CC 2015.0.1 (64-bit)	258 MB	03/08/2015	16.0.1 release

  

• PROBLEMS AFTER UPDATE DOWNLOAD

  I downloaded the microsoft updates and after the closing down and restart computer download I received a message that says: updates not configured correctly coming changes
  Do not stop your computer.

  then it restarts continuously and again with the same error message and I am not able to enter the computer, etc.

  PLS HELP

  [Correction to Vista]

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And read this info about the update settings:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• HP Envy M6 64 bit problems after update to 8.1 windows

  Last night I updated to windows 8.1 8 and have had problems since. I have a 64 bit HP ENVY #C2L94UA # ABL m6 after update, I tried to play Devil may Cry game that worked perfectly under 8.0 and then he comes to start charging the computer turned off. I did research online and exhaustion possibilities why including the abolition of the xbox drivers and reinstall the game but nothing doesn't always turns off the computer. I then opened AMD vision, to try to adjust the settings, I noticed I was now just as 3 options of things to settle. I could just adjust power consumption on the processor dependimng on if the computer was plugged in or not. Went a whole optiuon to adjust graphix and all the things to do it graphically disappeared. Then I redownloaded the catalyst drivers and tried to reinstal. Once the computer off again. Every time I have try and update the graphics it stops. Site Web HP says that all my drivers are up to date. Then, I rebooted the computer by pressing ESC and tried to do a system refresh. He failed. All the options of wiping my computer clean and refreshing failed. I said that it lacked a partion for one of them. Even system restore will not work. It shows my Ati video card in device manager. Please help me ty

  OK I solved my problems that I did start the computer in safe mode and then I uninstalled my cards video from Device Manager. I then restarted the computer and installed the version of catalyst that was said to work with 8.1 and switchable graphics cards. I have restsrted and have more no video issues at all.

• Vista - video problems after updates

  I went to shut my computer down about two weeks ago and he told me there were four updates, so I gave in and went to bed. The next morningarting the computer problems started. There seems to be a problem with the graphics and it could freeze after a while. I had the same problems with another computer just after having updated and he had taken home. They told me it was the graphics card and replaced it under warranty. I found it strange that both computers had the same problem at the same time. Given that the extended warranty on this computer was just exhausted I took to another store and after explaining what happened and work on it for three days, everyone came to the conclusion that it was the updates that caused remember there was nothing they could do! So I searched the Internet for a solution and found that it is a common phenomenon. Now I'm supposed to just buy a new computer? I don't have much that won't happen again with a new computer, given the frequency of this problem seems to be trust.

  Never install any Windows updates hardware drivers.

  Get them form the manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Huge problems after updateing to 31.1.2

  Hello

  I encountered several problems after the update to 31.1.2.

  1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:

  The message send failed.
  The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.

  I have control over the mail server and reflected on the Messaging log and it said:

  2 Oct 17:08:37 droplet postfix/smtpd [10916]: connect from unknown [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: disconnect from unknown [xxx.xxx.xxx.xxx]

  When I try to send mail.

  2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.

  3. all my entries in the missing calendar which is a very big problem for me.

  Best regards

  Andrija

  Close Thunderbird and go to your profile folder.
  There is a subfolder "extensions".
  Find the folder for both the lightning and Enigmail under "extensions" and delete them.

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• WiFi problem after updating iOS 9.3

  Your Wifi stop working on the iPhone 5 after update of iOS 9.3?

  My WiFi is fine

  To solve problems

  Settings - general - reset - reset the network settings

  (You have to re entry will save WiFi password)

• Pavilion g6 1202-TX: driver problems after update to 8.1 Windows

  Hello

  I've recently updated my product to 8.1 of Windows and even if I have material for a sound SRS surround, I can't find the software patches necessary to return my sound quality to its original levels of Dolby. I have already installed the IDT audio drivers available in support of the Web site forums always the his qualityy is very poor.

  In addition, after installation of the Qualcomm Atheros Wireless card driver from the support forum, my light on the adapter does not turn Orange and stays blue all the time.

  Kindly help me to solve these problems.

  Hi @Yuvraj_Gupta ,

  Welcome to the HP support community. I saw your post about the problems after the upgrade to Windows 8.1. You encounter some problems because there is no driver Windows 8.1 to your model, only Windows 7 and 8. This Driver de Audio IDT high-definition is the most recent that I can find, but I can't guarantee that it will work.

  For wireless light trying to install this Driver HP wireless button.  Once installed, you should be able to switch it off and on again.

• WiFi problem after update of lollipop

  Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.

  That's what I'll do, fix the phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

  and uninstall any antivirus > check again.

• icons turn huge on computer screen after updates

  updates are set to occur automatically, and for the second time, when I turn on the computer, the icons are huge, and there is no way I can make it smaller. the only way is to restore my computer to an earlier time before the update took place. Help.

  Hello

  We are here to help. To solve your problem, follow the steps below:

  Method 1:
  You can run the Aero Troubleshooter by clicking on the link.
   
  Method 2:

  Log on to the manufacturer's Web site and download and install the latest drivers for the display drivers installed on your computer.

  Updated a hardware driver that is not working properly

  Refer to this link.

  Automatically get recommended drivers and updates for your hardware

  Refer to this link.

  Let us know how it goes and do not hesitate to get back to us if you need further assistance.

• Problems after update "BOLD" 9000 blackBerry Smartphones

  After update BB Bold 9000 to V5.00.681

  Bundle 1137

  Platform 52.064, there are no Applications available in the application launcher (DM Version 6.0.1.18 on Windows 7). The Smartphone works very well but unfortunately Memopad and ToDo is missing. As part of the Planer DM, these two applications are marked as not installed. Please help me how to install these applications. In the application launcher, there is ONLY "Blackberry App World"

  Hello

  Try the following.  Download the operating system of your carrier's Web site and install it on your computer.  You can do this by selecting your operator from the list here: http://us.blackberry.com/support/downloads/download_sites.jsp

  Once you've done that, see if necessary applications will appear in the desktop software.  If this isn't the case, then there is another method which should work.  Just to be sure, make sure you back up your first device using Desktop software first.

  On your computer, go to C:\Program Files (x 86) \Common Files\Research In Motion\Apploader and run the Loader.exe file.  (Note: on computers 32 bit, should no (x 86) in the Program Files folder because the Program Files folder).

  Once you start the Loader.exe file, simply follow the steps until you get to the point where you can select the applications.  Now you should see the option to check the Documents To Go, notebook and any other software that has not been installed.  Once you have all the apps you want enabled, simply press next (note: leave everything that is checked as checked, unless you want to uninstall).  This should now load the applications on your BlackBerry while keeping the rest of your BlackBerry file system.

  I hope this info helps!