Computer rebooted and all is gone

Similar Questions

• I installed a windows 95/98 CD-ROM on my computer. And all the colors now gone kind of negative.

  I installed a windows 95/98 CD-ROM on my asus vista computer. The first time I tried it failed and said some settings needed to be changed so that it can be downloaded so I just clicked that it was OK. I don't know what settings have been changed, as it did this automatically. The cd installed fine and works fine. However, everything else on my computer still works however the color went somehow like a negative image.

  I uninstalled the CD to see if it would help, but the color is not returned to normal.

  How can I change my computer back so the color returns to normal and not as well the nearest thing I can describe it is like a negative image.

  Thank you

  Contact the manufacturer of your computer (ASUS) and ask them how to perform a recovery procedure completes the system. Carey Frisch

• Computer crashed and all my settings changed

  My computer just crashed and all my Firefox settings have reset, none of the passwords are stored, any of the settings of my add-on is saved, my home page is not registered, etc.

  I remember what happened once I deleted prefs.js and renamed another prefs.js file and it worked (and I think that's what I did) I can't know what I had to do however. Anyone know?

  Solved the problem, there is a file newPrefs.js that I renamed prefs.js and all my settings were there

  Does anyone know a good way to save profiles of boards?

• My Windows 10 computer crashed, and all applications have been lost.  I'm about to re - install LR6 (standalone, no CC).  I think that both facilities are allowed.  Can I get the meter re - assign once my reinstalling?  Thank you.  Jim

  Hello, my Windows 10 computer crashed, and I had to start again, allow a reinstallation of the operating system complete with all my apps being deleted from the machine.  One of these applications was LR6 (independent, no CC).  In my view, LR6 allows two installations of the software by license, so I am writing to ask that the 'meter' installation reset 'one' when I'm done with this installation.    I would never need the re-install second, but given the instability of the operating system, it may be necessary... Thank you.

  Jim Clay

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server

• Computer desktop and all the screens display very large format of normal size no

  I'm having some their with my screen showing all very fat and wide. I tried to shut donw the computer and start several times see if it could set as it normally does, but it's not. Nothing appears on the screen and I'm having a hard time watching a things. This isn't a problem because of the zoom either key...

  Help, please!

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Settings for best results on the new chronology - computer crashed and all were destroyed

  Addendum: I now now exporting an mp3 file and it seems to really take long..maybe it is the sound that is originally one of the questions? He got a little faster towards the end but still long and was good to only 26.7 MB at 1:20 in length

  I wonder if there's a place I can go to get (learn) certain parameters for the projects

  I had a friend who helped Pro set me up some parameters of years ago and now they are gone

  I just did a podcast with very little in regards to Mo (as shown below), but it came out as beyond 1 GB and the estimated in Manitoba was 679 MB... and it took forever to compress.

  When I made videos of similar length before the crash, it could be 200 MB

  The podcast is simply audio with a few pictures on the timeline in order to download on youtube

  Maybe I dragged the wrong item, first to the new icon of the element to form a new sequence?

  Any help is appreciated

  Thank you!

  If someone could tell me please what to drag it to the icon new sequence first to get the least amount of Mo at the end

  Path: C:\Desktop\Mark Podcast 6-12 - 2015.mp3

  Type: Audio MP3

  File size: 34.9 MB

  Audio Format: 44100 Hz - compressed - Mono

  Project Audio Format: 44100 Hz - 32 bit floating point - Mono

  Total time: 01:16:39:20196

  -----------------------------------------------------------------------

  Path: C:\Desktop\Mark SSD Drive\Intro video Stuff\New Intro with Andy music w-Mark Voice.mpeg

  Type: MPEG Movie

  File size: 243.6 MB

  Image size: 1280 x 720

  Frame rate: 59.94

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 00:01:12:52

  Pixel format: 1.0

  -----------------------------------------------------------------------------

  Path: C:\Desktop\Mark SSD Drive\Intro video Stuff\mark - le-Mont-shasta16 - 9.jpg

  Type: Jpg

  File size: 78 KB

  Image size: 864 x 478

  Pixel format: 1.0

  ------------------------------------------------------------------------------------

  Path: C:\\Documents\REAPER Media\02-150612_1651 - 01.wav

  Type: Windows audio WAVE file

  File size: 2.2 MB

  Audio Format: 44100 Hz - 24-bit - Mono

  Project Audio Format: 44100 Hz - 32 bit floating point - Mono

  Total time: 00:00:17:11185

  ---------------------------------------------------------------------------------------

  Title Type: always

  Data size: 4 KB

  Size of the title: 1920 x 1080

  Sampling: 32

  Pixel format: 1.0

  ---------------------------------------------------------------------------------------

  Title Type: always

  Data size: 3 KB

  Size of the title: 1920 x 1080

  Sampling: 32

  Pixel format: 1.0

  -------------------------------------------------------------------------------------

  Path: C:\Documents\REAPER Media\02 - 150612_1705.wav

  Type: Windows audio WAVE file

  File size: 3. 4 MB

  Audio Format: 44100 Hz - 24-bit - Mono

  Project Audio Format: 44100 Hz - 32 bit floating point - Mono

  Total time: 00:00:26:27885

  ------------------------------------------------------------------------------------------

  Marc - le-Mont-shasta16-9

  864 x 478

  01: 18; 23; 29, 29.97 FPS

  48000 Hz - Stereo

  600 MB is not question for YT.

  Make your identical to your output sequence.

• Computer starts and restarts in an infinite loop at startup.

  Received this e-mail from Comcast around 2 April 2013 stating my computer may have a 'bot '. This function constant guard of Comcast. On 5 April, my computer started this start and restart * in an infinite loop. I took the computer manufacturer and all wiped out settings. Comcast removed free Norton antivirus and replaced by Webroot. When the infinite loop finally stops, I just leave the computer on and log off because if I stop, it will begin to restart in an endless loop. I used MicroSoft's analysis and Webroot finds no Malware since I restored it to the constructor parameter. I don't understand??? It does only as long as my wireless light on my laptop. If I boot my computer and disable immediately any connection to the internet, there are no endless loop. I get the desktop to the top and turn on the wireless on my laptop and the computer begins to restart. My daughter uses her Tablet without any problem the same modem wireless. I always get this duplication of constant guard of Comcast email. I sent email them back and ask them if they are sent, and if it was a fake, and their response was like they didn't know what I was asking. Knuckleheads! I am lucky to be online now. He ran into an infinite loop, start and restart hours today. Help!

  Hi Michell,

  1. don't you make changes to the computer before the show?
  2. What do you mean by "I have always received this e-mail from duplication of constant guard of Comcast?

  Method 1: I suggest to disable automatic reboot and then check if the problem persists.

  (Including safe mode) advanced startup options (disable automatic reboot system error)

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Method 2: I would say too you will observer event logs to check what is causing the problem.

  Open event viewer
  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-in/Windows7/what-information-appears-in-event-logs-event-viewer

  Post us the results once you try the steps above.

• HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

  My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

  I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

  1st boot Device [hard disk group]

  2 St boot Device [CD-ROM Group]

  3rd boot device [network startup group]

  4 rd boot Device [group Floppy]

  -> Disk Boot Priority group [not installed]

  -> Group of CD-ROM boot Priority [DSK02...]

  -> Group of HDD to boot Priority [DSK00...]

  -> Group network boot priority [not installed]

  I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

  Thanks in advance.

  Sorry for the bad spelling.

  I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

• My computer crashed and after reboot, I lost all my saved passwords. How can I recover it?

  I was looking on a saved password when suddenly my computer crashed and restarted. After reboot I couldn't see the saved passwords.
  As a test, I saved a password and this password is displayed in the list of saved passwords, but all the others are still missing.
  How can I retrieve my saved passwords?

  Thank you!

  If the file has no valid data then you may not use this file.

  You can try if there is an earlier copy of the logins.json file.

  • Right click: properties > Previous Versions
  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

• I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  You have been discharged into a temporary user account. It may be a glitch, or your user account may be damaged. First try a system restore when things worked. If it suits it, fine. If it is not then your account is damaged and the best thing to do is to create a new user account and copy your data from the old to the new. I would also like to do a Chkdsk and then some hardware diagnostics on the hard drive and RAM to make sure that the material is solid.

  CHKDSK - click here to open the computer. Right click on the hard drive you want to check, and then click Properties. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will be prompted, see the disk check for the next time you restart your computer.

  Hardware tests - http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Corrupt user account - if your single administrative user account is damaged (and therefore have what one user account is A Bad Thing), you must log on to the built-in Administrator (disabled by default in Vista) account. From there, you can create a new user account for yourself. In these cases, I prefer not to copy the whole profile to a new way to do not copy the bits corrupt. I prefer a new user account to copy the data (documents, photos, emails, etc.). Here are the instructions to do this. I assumed that you had only an administrative account, then you might want to take a look at the "general recommendations for setting Up user accounts in Vista" at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  Activation of the built-in administrator.

  Method 1. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  If you do not have a Vista installation DVD, you can either make a bootable DVD of Vista repair in the file at this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account.

  Method 2. Or you can use NTpassword to enable the built-in administrator. In both methods, you need third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  http://home.eunet.no/pnordahl/ntpasswd/

  B. create a new user account for yourself and by copying data from your damaged to her user account

  1. you are now connected to the built-in Administrator account. Go to control panel > user accounts and create a new Standard user for your daily work. Let's call it "Sheldon" for this example. Also create an administrator user, called 'CompAdmin' (or 'Tech' or similar).

  4 Ouvrezunesession 'Sheldon' once for profile files are created. Now log off 'Sheldon' and 'CompAdmin '. In "CompAdmin", disable the built-in security administrator. Do this from a command prompt:

  Start > Search > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt. Now, you will get the command prompt. Type:

  NET user administrator / active: No. [Enter] and exit the command prompt.

  5. always in 'CompAdmin', you want to open two windows explore side by side. Open computer and navigate to C:\Users\old-corrupted-account. Now, do that again, but navigate to C:\Users\Sheldon. Copy the data from 'old-corrupted-account' on records in 'Sheldon '. Remember your Favorites, bookmarks (if you use Firefox) and by e-mail if you use an email like Windows Mail client.

  6. When you are finished, log in to "Sheldon. All your stuff should be there. When you are sure to have what you need, you can remove the old man-corrupted-account control panel > user accounts.

  General C. recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• All the icons and shortcuts are gone from my computer screen.

  I down loaded a wiget google today and subsequently, I have experienced this problem. All my programs and all shortcuts are availble by Explorer and open the folder deshtop. They work very well, but the computer screen does not display them. When I opened the they seem normal, so it doesn't seem to be a problem with the monitor. When I try to drag or send to, or save, I get a message that says that they cannot be sent to their current location. The computer knows that they are in the file offers / office but don't show them on the screen. I have add / remove programs but no change. I sent a file that was in a different place and it went in the desktop folder but not on the screen. It's like there's a toggle to see the show/don ' t somewhere. There is no corruption in the programs or files. Thank you for any advise you can give.

  Attached to this day! I was able to run the restore and the date prior to the event. Only problem was Norton, I had to uninstall and re-installed but now works perfectly!

• I updated to 2015 CC and now on reboot IRB all gone. Any advice?

  The upgrade of 2015 seems to have played havoc - after 90 minutes with Adobe help chat, it worked. Then I rebooted, and he did. Nothing available. Who knows what I might try?

  check your installation directory.  is the cc app it listed?

  If not, what directory did you check?

• I was installing updates for Window7, the Internet explorerer and Startup icons, ect were not there when the computer reboots.

  I have Windows 7-64 bit. My resolution of the Office has also been affected, the bar downstairs is gone and all access to the computer control panel... Does that mean I need to restore or remove facilities? If so, how?

  Reboot it again and see if the problem goes away.

  Sometimes a 2nd reboot solves the problem, sometimes not.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• computer freezes and must stop and restarts manually to restore, it often happens in all programs

  computer hangs in all programs frequently, symbol of computer work when the mouse is moved, can not close except manually, after reboot manually get the normal shutdown error message and asks if want to restart windows normally, after a computer reboot works fine until sherbet which could be quickly or some time later, when it happens in all programs

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I rebooted and now all websites and emails, are tiny characters. to enlarge?

  I rebooted and now all websites and emails, are tiny characters.  How can I enlarge the fonts?

  Hello
  1. have you recently to perform any update of Windows?
  2. what web browser do you use to access the Internet?
  3. is the problem limited to content on the Internet?
  Method 1:
  If the problem is all the text and icons on the computer and Internet, then you can follow the links below to solve the problem.
  Change the screen resolution
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
  Make the text on the screen larger or smaller
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-text-on-your-screen-larger-or-smaller
  Method 2:
  If you use Internet Explorer and the text and the content of the Internet seems small, then you can check the link provided below to zoom in the Web page.
  Zoom in on a Web page
  http://Windows.Microsoft.com/en-us/Windows-Vista/zoom-in-on-a-webpage