[computer restart or start error 0625 / 111134:ERROR:proxy_resolver_winhttp.cc$ 79] WinHttpGetProxyForUrl failed: 12167

Similar Questions

• Win2000pro computer restarted after an error checking, event ID 1001

  After ten years to keep my Compaq Deskpro EN with WIN2000pro wkstation online, I get it now ' the computer was restarted after a bugcheck. The bugcheck was: 0x0000007f [0x00000008 0 x 0000000 0000000 x 0, 0 x 0000000]. Microsoft Windows 2000 [v.15.2195]. A dump was saved in the: C:\WINNT\Minidump\Mini102511-01.dmp. "I find no conflict in Event Viewer the audit of"error ".  Is it really one can provide the related question? Is there a software related issue?  Sometimes I click on print files and it happaned.  I reinstalled my drivers for my Xerox WorkCentre XL2120 and now he just happaned once again.   Once I close a window.  The only error I have at the moment in the event viewer has to do with the TrueVector monitor for my timing of Zone Evetn ID 7009 alarms.  This evetn doesn't happan while checking error.

  I use my WIN2000PRO machine as well as my e-mail, a printer host client, as well as to contain the many programs in WIN2000 / WINNT and I did not intend to retire there if it's something I can fix.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Server Forums. Here is the link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Computer does not start "Error code: OFOO:137 B.

  When I booted up my pc I got the message "Windows cannot start because the following file is missing or corrupt: \Windows\System32\Config\System you can try to repair this file by starting Windows Setup with the installation of original CD-Rom Select 'r' at the first screen to start repair"then I used a Dell diagnostic tool on my pc with a response from the "error code" : OFOO:137 B ' Msg: IDE device failed: blank media or no media is present in optical drive. "  Tuberculin media with data (Resource CD, CD of Installation) .the given the error code and message can be used by Dell to help diagnose the problem

  Hello

  1. have you made changes on the computer recently?

  Your CD - DVD drive cannot read the disc, I recommend that you contact Dell to check for any physical damage. Once you have the player running, then use the article below:
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• When I turn on my computer and it starts "error runtime with bigfix program" pop up how to fix this?

  Please help, been trying to figure this out forever

  You now or you already had that installed from BigFix?

  They have a few ideas on their page of World Wide Wide Web that could help you:

  http://help.BigFix.com/General/bfproblem.shtml

  They have a consumer version of BigFix and an enterprise version and also their own support forums if you need help.

  Things would of course go smoother in the MS Answers forums if them ask a question dialog would invite a little information system, when a new question is asked.

• HP 2000-329WM laptop: could not start error Info: the boot selection failed because a required device is not accessible.

  Hello. First when I started my computer this is a white screen. After doing a hard a reboot screen pop up saying:

  Windows could not start. A recent hardware or software change might be the cause.

  He told me to insert your windows installation disc (which I did not).

  He also says

  Status: 0xc000000f

  Info: The boot selection failed because a required device is not accessible.

  Whenever I try to boot normally, it wouldn't let me.

  Hello

  You can use a repair disc. To obtain a repair disc, find someone with the 32-bit Windows 7 computer and create a system repair disk to repair your problem.

  This link will help you...

  http://maximumpcguides.com/Windows-7/create-a-Windows-7-system-repair-disc/

  Checkurtech

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• Vista - during the Windows Update, get the error "computer restarted unexpectedly or encountered an unexpected error.

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  * original title - no error number. Message says: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. to install Windows, click "OK" to restart the computer, and then restart extra

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  Hey dkeeney2330

  ·                        try a restore system before this

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. reboot your computer.

  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.

  3. Select theSafe Mode option with the arrow keys.

  4. pressenter on your keyboard to start mode without failure of Vista.

  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Vista goes into safe mode.

  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that didn't he corrects not reposting in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

  Error loading \3\DLBUtime.dll

  I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

  I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

  Can someone help me with this?

  Aprilm,

  You are LuLu5119, who posted a question last August?

  If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

  Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

  In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

  Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

  Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

  If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

  As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

  MalwareBytes Anti-Malware: http://malwarebytes.org/
  SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

  For MalwareBytes Anti-Malware, download, install, update and run.
  For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error - NTLDR missing Windows XP Home computer does not start.

  Original title: XP-based computer does not start.

  XP Home does not start after I uninstalled a large file of Samsung mobile phone. I get a missing NTLDR error message and have had a System32 error as well, but there is no DOS prompt that would allow me to access anything whatsoever. Another problem is that I lost my installation CD. I initially bought this Dell PC nine over 6 years ago, so can provide identification details, if necessary program. Could someone tell me how I can make a recovery CD please? (No floppy drive not installed in the PC). To further complicate things (Yes, I know - I created many more problems that we all need), I have to keep my files on the hard disk, so cannot do a complete reformat, unless someone can tell how to save them somehow. My BACK skills could be summed up as "plodder inexperienced but determined!

  The file might be missing or it could just be that XP can't find it if your file system has somehow got corrupted.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  System32 error, you see, is what exactly?

  Depends on a few factors, there could be another copy of the file NTLDR in other places on your system, but you have to start on something to find out whether there is or not.

  After answering the above questions, I begin to make a CD from Recovery Console bootable XP by running a chkdsk/r, first on your HARD drive and then see what is left to do.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Computer XP has unexpected restarts and system error 1003 event ID 102

  I have a similar problem as my previous shows:

  Computer restarts without reason see or crashes.
  I already reinstalled the system on a whole new drive as restarting Thursday July 28 ended in an endless restart loop.
  Until yesterday, the clean system has been works well, but suddenly she has restarted.

  I tried to follow the input from Joselbarra, but I wasn't able to get a blue screen.
  The computer comes from the reboot.

  Fortunately, I have some images of memory I put logging into place when reinstalling.

  The last restart resulted in no error message in the system event log.

  So here's the information that I have collected:

  System of brand / model: it is a dimotion of old ditech under 4 (computer Austrian company HW and SW) AMD Sempron with 1 GB of memory and an additional graphics controller (I do not use one on board) running Windows XP Professional

  Config antivirus: Avira! (latest version, downloaded Friday, July 29, 2011) and Spybot Search & Destroy.

  It has 2 DVD players, it is a DVD from LG burner, the other is just a player.

  Version full bootable to Windows XP Professional, bought in 2007 at ditech with computer

  Rebooting the system is not reproducible on any action or command. It just ahappens occasionally.
  I got it twice yesterday and twice today, while the second time the computer has not created a dump of memory needed 3 restarts coming up again completely (first time it froze, second time I just see a black screen... need to press reset butten it rise again)

  He was never a BSOD, just a restart. Chicken even disabled this option in the settings startup and recovery.

  Here is the information of the msInfo32:

  Betriebssystemname Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Microsoft Corporation Betriebssystemhersteller
  SystemName
  Manufacturer of the Systemhersteller system
  Systemmodell system product name
  X 86 Systemtyp PC
  Processor x 86 family 15 model 95 Stepping 2 AuthenticAMD ~ 1803 Mhz
  Version of the BIOS/date Phoenix Technologies, LTD ASUS M2NPV - VM ACPI BIOS Revision 0801, 13.03.2007
  SMBIOS Version 2.4
  Windows-Verzeichnis G:\WINDOWS
  Systemverzeichnis G:\WINDOWS\system32
  Startgerat \Device\HarddiskVolume1
  Gebietsschema Österreich
  Hardwareabstraktionsebene Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Benutzername
  Zeitzone Westeuropaische summer time
  Model realer Speicher 1.024,00 MB
  Rechtssicherheit realer Speicher 236,92 MB
  Virtueller model memory 2.00 GB
  Virtueller Rechtssicherheit Speicher 1.96 GB
  Big der Auslagerungsdatei 2.40 GB
  Auslagerungsdatei G:\pagefile.sys

  Hope it's ok to leave the German labels here, I think that you can easily find what they mean :-)

  Information about video drivers:

  Name NVIDIA GeForce 7300 GS
  PNP-Geratekennung PCI\VEN_10DE & DEV_01DF & SUBSYS_C4373842 & REV_A1\4 & D 13 46659 & 0 & 0020
  Adaptertyp GeForce 7300 GS, NVIDIA-compatible
  Adapterbeschreibung NVIDIA GeForce 7300 GS
  Adapter RAM 512,00 MB (536.870.912 bytes)
  Installierte Treiber nv4_disp.dll
  Treiberversion 6.14.10.9147
  File INF oem10.inf (section nv4_NV3x)
  Farbebenen 1
  Farbtabelleneintrage 4294967296
  Resolution 1680 x 1050 60 Hz x
  32 bits/Pixel
  Speicheradresse 0xFA000000-0xFCFFFFFF
  Speicheradresse 0xD0000000-0xDFFFFFFF
  Speicheradresse 0xFB000000-0xFBFFFFFF
  IRQ channel IRQ 16
  A-E-Port 0x000003B0-0x000003DF
  A-E-Port 0x000003C0-0x000003DF
  Speicheradresse 0xA0000-0xBFFFF
  Treiber g:\windows\system32\drivers\nv4_mini.sys (6.14.10.9147, 3.78 MB (3.958.496 bytes), 12.08.2006 06:42)

  The three dump files that I have are:

  ==================================================
  Dump file: Mini080111 - 01.dmp
  Crash time: 01.08.2011 07:10:46
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check code: 0 x 10000050
  Parameter 1: 0xb0bd1d34
  Parameter 2: 0x00000001
  Parameter 3: 0xbf802f5a
  Parameter 4: 0x00000000
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 2f5a
  Description of the file: Mehrbenutzer-Win32-Treiber
  Product name: operating system Microsoft® Windows®
  Company: Microsoft Corporation
  File version: 5.1.2600.6119 (xpsp_sp3_gdr.110602 - 1657)
  Processor: 32-bit
  Plant address: win32k.sys + 2f5a
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: G:\WINDOWS\Minidump\Mini080111-01.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2600
  Empty the file size: 90.112
  ==================================================

  ==================================================
  Dump file: Mini073111 - 02.dmp
  Crash time: 31.07.2011 08:16
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check code: 0 x 10000050
  Parameter 1: 0xf8000003
  Parameter 2: 0x00000001
  Parameter 3: 0x804f8cd6
  Parameter 4: 0x00000000
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 24 b 3
  Description of the file: Mehrbenutzer-Win32-Treiber
  Product name: operating system Microsoft® Windows®
  Company: Microsoft Corporation
  File version: 5.1.2600.6119 (xpsp_sp3_gdr.110602 - 1657)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 21cd6
  Stack address 1: win32k.sys + 24 b 3
  Stack address 2: win32k.sys + 2f68
  Battery 3 address: win32k.sys + 3763
  Computer name:
  Full path: G:\WINDOWS\Minidump\Mini073111-02.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2600
  Empty the file size: 90.112
  ==================================================

  ==================================================
  Dump file: Mini073111 - 01.dmp
  Crash time: 31.07.2011 08:11:56
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check code: 0 x 10000050
  Parameter 1: 0xa5e4d820
  Parameter 2: 0x00000001
  Parameter 3: 0x8055e695
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 87695
  Description of the file: kernel NT und-system
  Product name: operating system Microsoft® Windows®
  Company: Microsoft Corporation
  File version: 5.1.2600.6055 (xpsp_sp3_gdr.101209 - 1647)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 87695
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: G:\WINDOWS\Minidump\Mini073111-01.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2600
  Empty the file size: 90.112
  ==================================================

  Hope someone can help nail down the problem.

  I downloaded them on my Skydrive so you need them too.

  Let me know if you need anything else for that to be resolved.

  BTW: if I remember well first numbers started with installation and download of Service Pack 3, which led to the system now crashes and restarts.

  Thanks for any help you can provide

  Ondrej

  Hi all, thanks for your help and comments.

  As mentioned earlier, I gave to buy a new graphics to try and since then I have no problem with that. No unexpexted start again. But now I have problems with the audio driver... but it's a driver problem I guess, not MSWinXP :-)

  y2kim, I'll upload the files you mentioned, as for.

  Once again, thank you for the help and advice.

  VARO

  Ondrej

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer