Computer does not start "Error code: OFOO:137 B.

Similar Questions

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• Spooler services printing does not start, error Code 1053

  Original title: Error 1053

  Hello

  my print spooler services do not start. Any help appreciated.

  Hi Paul,.

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with the Printer Spooler service and receive the code error 1053.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest to run the printer Troubleshooter and check if the problem persists.

   

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also see the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can try running the following commands and check if the problem occurs and also to see if the printer comes back online after

  a. click the Start button, and type cmd in the box start search

  b. right click on cmd in the list programs and select run as administrator

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  c. at the command prompt, type the following commands and press ENTER after each one

  net stop spooler

  and then

  net start spooler

  This will stop and restart the print spooler service. If this solves the problem of the printer is offline, please let us know.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

• Windows XP does not start error Code 0 x 00000024

  I was playing a game oin my 20o5 Windows XP Media Center EDition and then it froze and he died so I decided to reactivate it, but then it went to a blue screen with a code of 0 x 00000024(0x00190203,0x8AD9E0D8,0xc0000102,0x00000000) Please help me I don't know what to do

  Hello

  1. did you of recent changes on the computer?

  2. are you able to boot into Windows after the Blue error screen?

  3. do you have security software installed on the computer?

  This error occurs generally if there are bad sectors on the hard disk.

  I suggest that you perform a CHKDSK scan on the computer by using the recovery console, which would scan for bad sectors on the hard drive will try to get it back.

  1. Insert the Windows XP CD into your CD drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
  2. When the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R
  3. When you are prompted, type the administrator password.
  4. Type: chkdsk /r and press ENTER.

  When you are finished, type exit and your PC will restart and if all goes well start Windows.

  Note: If there is any data on the bad sector on the hard drive, it can be lost. If you can boot into Windows, I would say that you back up the data and continue.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

• Windows Firewall does not start: error code 0 x 80070437

  I can not start the Windows Firewall on my system.

  When you try to start the firewall I get error code: 0 x 80070437
  During the execution of the services as administrator, the Base filtering engine is started.
  Firewall Windows is not started, but when I start: error 1079: the account specified for this service is different from the account specified for other services running in the same process.
  Authorization of firewall Windows Driver is not present.
  How can I get my firewall?
  Thank you
  Hey Conor,
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

  computer does not start.

  the screen message is: "autochk.exe not found."

  second message is: "stop: c000021a (fatal system error)".

  «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

  "the system is stopped.

  Hi Bobzurcher,

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Let us know if that helps.

• Error - NTLDR missing Windows XP Home computer does not start.

  Original title: XP-based computer does not start.

  XP Home does not start after I uninstalled a large file of Samsung mobile phone. I get a missing NTLDR error message and have had a System32 error as well, but there is no DOS prompt that would allow me to access anything whatsoever. Another problem is that I lost my installation CD. I initially bought this Dell PC nine over 6 years ago, so can provide identification details, if necessary program. Could someone tell me how I can make a recovery CD please? (No floppy drive not installed in the PC). To further complicate things (Yes, I know - I created many more problems that we all need), I have to keep my files on the hard disk, so cannot do a complete reformat, unless someone can tell how to save them somehow. My BACK skills could be summed up as "plodder inexperienced but determined!

  The file might be missing or it could just be that XP can't find it if your file system has somehow got corrupted.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  System32 error, you see, is what exactly?

  Depends on a few factors, there could be another copy of the file NTLDR in other places on your system, but you have to start on something to find out whether there is or not.

  After answering the above questions, I begin to make a CD from Recovery Console bootable XP by running a chkdsk/r, first on your HARD drive and then see what is left to do.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Computer does not start

  My computer does not start and it will not Mode without failure. I run the Memory Diagnostic test and it shows I have a hardware problem. I also tried to restore my computer to an earlier time, but it showed an error. I have 1 GB or RAM and recently she continues to change from 512 MB to 1 023 MB. Help, please.
  
  Care (I know)
  1 GB OF RAM
  INTEL CORE 2 DUO 2.43 GHz (I'm not sure)
  Card Gigabyte mother
  OPERATING SYSTEM: WINDOWS 7 ULTIMATE

  It seems that the memory must be replaced.  While you're at it, maybe get over 1 GB.  Windows 7 will run on it, but not well.  If the PC came with Windows Ultimate edition, it was more than likely 4 GB or more.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• Computer does not start, the registry is damaged. What should I do?

  Original title: I have a computer gateway running vista home. The computer does not start and system repair fixed. The error is the root cause "registry is corrupt. What should I do?

  My system stopped responding and I had to make a hard stop.  When I tried to restart the computer, I had a mistake of lying to start automatically.  Commissioning and repair screen came and did his thing.  He was not able to solve the problem. The end result was an error indicating that the registry has been corrupted.  What should I do to get my computer running again?

  Hi Laurayne,

  You can read the following article and try to boot from the disk Installation of Windows Vista to perform a restore system from Windows Recovery Environment.

  What are the system recovery options in Windows Vista?

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Keyboard Microsoft Wireless 1000 and a Microsoft wireless optical mouse 2000 - my computer does not start.

  Hello.

  I have Microsoft Wireless 1000 keyboard and an optical mouse wireless Microsoft 2000, they worked fine on my old computer with XP.

  Now, I bought an Acer Predator G3620 with Windows 7 and my computer does not start. He stops and beeps when it says "Press DEL to enter setup", this continues to the repeat. When I use the wired Acer keyboard and mouse the computer starts normally.

  When I inserted the original CD with the drivers, it gave an error of compatibility with this version of windows. So I downloaded the drivers and everything seemed fine. But when I start the computer (or reboot) I have to disconnect the transmitter/receiver or the computer stops and beeps.

  Once the computer is turned on, I can reconnect the transceiver, and it works fine.

  Find it me hard to believe that it has to bee like that.

  I have to buy a new keyboard and mouse?

  Brgs,

  Robert

  Go into the BIOS of the ACER and set it for legacy USB, USB mouse, USB keyboard, or along those lines...

  Then, go here for the drivers...

  http://www.Microsoft.com/hardware/en-us/downloads

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.