computer Vista laptop does not accept password

Similar Questions

• Computer HP laptop, does not accept the recovery disks and don't accpet Windows Vista upgrade (HomeP to ultimate).

  Apparently the upgrade does not recognize that Windows is on the drive, but cannot restore the original software as HP blocked their recovery disk. The recovery partition is there, but he cannot get starter.  The recovery disks have the original spirit operating system Windows - how can I get the upgrade to recognize?

  Hello

  an upgrade must be done from vista, NOT operating system by booting from the disk to upgrade

  as you have problems using the maunfacturers recovery process, upgrade disc etc., read what you may have hardware problems.

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Computer Vista laptop does not detect my speakers!

  When I turned on the laptop today, there is no sound coming from the speakers when I tried to listen to music. The speakers worked yesterday. When I right click on the sound icon in the menu of shortcuts in the lower corner on the right and click Open volume mixer, I can't find the speaker tab reading device (I made sure that both "show disabled devices" and "show disconnected devices" options are checked). The only device listed under the playback tab is "Peripheral digital output (HDMI)". When I turn on the music, the bars on the right side of this unit turn to the Greens according to the sound, but there is still no sound coming from the speakers. There is also no sound in headphones when I plug them in. When I go to Device Manager, disable "high definition audio device" under "Audio, video and game controllers" and reset the laptop, the "digital output device (HDMI)" disappears and no devices are listed on the playback tab in the volume mixer. When I activate the "device high definition audio ' back, the digital output device (HDMI) appears again. So I'm assuming that the computer recognizes speakers as HDMI device even if there is no plug HDMI connected to the laptop.

  This troubleshooting help will be appreciated. Thank you.

  Hello
  
  1. What is the brand and the model number of this laptop?
  2. use the built-in Laptop speakers or you attach external speakers?
  3. did you of recent changes to the computer?
   
  Check if your headset is set to use as the default value * Communication * device instead of the default device, or if the two devices are configured by default. If so, that the fault of headphones, so that Windows will only use when they are connected.
   
  Method 1.
  Check volume settings.
  a. right click on the speaker icon in the taskbar, then select volume control options.
  b. put a check mark on "all devices evolving sound.
  c. make sure you have "Default uncontrolled communication device".
  d. place a check on the speakers and headphones.
  
  Method 2.
  I recommend you update drivers sound card from the manufacturer's website and check also if there is windows update available.
  See the articles below for more information.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  Let us know what happens when you play.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer Vista laptop does not stop when the lid is closed

  I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

  Hello banditpunpun2,

  Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

  Please let us know status.

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Hello. I would like to activate my educational program CS3 (version 2007) on my new computer. Unfortunately, it does not accept my serial number. What can I do? I delayed the program on my old computer, but it does not accept the activation on the new l

  Hello. I would like to activate my educational program CS3 (version 2007) on my new computer. Unfortunately, it does not accept my serial number. What can I do? I delayed the program on my old computer, but it does not accept the activation on the new laptop.

  Make sure you use the correct serial number.  Quickly find your serial number

  If you do not disable the original installation, then it is possible that your two activations permits were used, and you need to reset your counter to activate.  For this you must contact the Adobe Support via chat and ask them to reset your activations.  If you ask for more than that they will tell you that they cannot offer you any support.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• I'm trying to set up the new account on 2nd used computer, Outlook Express does not accept my new password.

  trying to set up the new account on 2nd used computer, oe does not accept my new password.

  If this account POP3? If you try to set up the same account on a second machine, all settings including the password must be the same.

• Can not get address for printer does not accept password

  Went to the eprint centre to save the printer worked fine but when we tried to give address printer so we can send to the remote printer does not accept the password any itry

  MasterBinker, have you tried to use the link you have forgotten the password in the login page for ePrintCenter?  This should send a new password to the email address.

  You can also try using a different web browser.

  Kind regards

  Sean

• BlackBerry smartphones HELP! "BOLD" does not accept password

  Hi all

  I have a big problem with my "BOLD" (German) 9700 BB.

  As I took on my jacket this morning it does not accept the password to unlock the screen.

  I thought it was me, so I tried again and again led attempts 3/10, 4/10, 5/10...Normally there are stars, so you won't see the pass, now its clear letters and numbers? More: top-right corner it showes EN then maybe this past German to English settig (I don't have it-on lens)

  I am now 9/10, the screen asking me to enter 'blackberry' but I am learning that if it doesn't hurt once more all on the Phanoe will be deleted which would be a nightmare that I don't have a backup...!

  an a German forum about someone with the same problem 'translate' pass numbers (1111) in letters (YYYY) as his apparently English keyboard - I did (get low), but it did not work?

  Someone at - it p l e a s e!

  Thans, Felix

  felixxx wrote:

  Indeed, I managed to change the language with alt + enter in German, which is good.

  Great!

  felixxx wrote:

  But again, if I want to type something in, clearly shown figurs/numbers, rather than the usual stars that makes me feel theres something wrong...

  Yes, it is normal to show you the characters you type, and it normally occurs after 5 wrong password entered.

  felixxx wrote:

  I just plugged it up tho my pc and after the beginning of the BBdesktop, he showed a popup saying:

  "you know that you only have one shot left. After that, all your data will be deleted.

  What is strange: in the title of this popup, he says: BB Bold 9700 - PIN 22BEE12C - what is it? do I type?

  You has not answered my question earlier if you have alternate characters or numbers in your password?

  If so, should we ALWAYS register the pressed ALT key first to this number?

• Compaq CQ58 computer 301SA laptop does not connect to 50Ghz band on router

  My laptop does not connect to the band 50Ghz on my router dual-band. I know that my router Netgear dual band diffuse 24 and 50 Ghz, but the laptop only shows the 24 Ghz band depending on availability.

  I have a Compaq CQ58 301SA Notebook PC, Windows 8 (64 bit OS).  It has a Ralink RT5390R 802 11bgn network adapter and a Realtek ethernet network adapter. I use the laptop wireless, for example using the Ralink connection and it connects easily to the 24 GHz band, but I want to broadcast TV programs and movies smoothly, for which, I understand that the 50Ghz band is preferable. I pay my ISP (Virgin Media) for a connection to Super-fast broadband but my laptop seems to be limited to the 24 GHz band. Seems to be the case if I work with the adapter Ralink wireless or wired with Realtek ethernet connection.

  This problem can be corrected? If so, how? What I have done research on the web, the problem seems to be network adapters. Can they work on the 50Ghz band? Or do I need to download another adapter (if so, which?) Or use an adapter external network I plug into a USB port?

  Driving me crazy...

  Hello:

  The Ralink RT5390R 802 11bgn is a map of the only band (2.4 GHz) only.

  Whenever you see a labeled bgn wireless card, it is a single band card.

  Cards labeled dual band abgn or agn.

  The maintenance manual (Chapter 3, page 19) does not indicate that any internal dual band card is supported, so you would probably have to go with an external usb dual wireless adapter.

  http://h10032.www1.HP.com/CTG/manual/c03593268.PDF

• My computer (or site) does not accept the no serial for Illustrator

  How can I start using Illustrator? I paid for it, and I thought that I downloaded (it took 1/2 hour). But the serial screen does not accept the serial number.

  Get in touch with the serial number and to activate by phone, web form or chat support.

  Mylenium

• Laptop HP - 8.1 Windows: laptop does not accept my password and keeps on rebooting.

  I know my password, but my laptop screen does not allow me to enter and keeps restarting the screen.  I tried to change my password to another laptop.  Even this does not work.  I was not happy from the outset to have a password, but the system would not let me update without it.  Help what I do.  I'm not technical.

  Hey,.

  Thanks for getting back to me! If you have tried the steps that I provided in my previous post and unable to get into your laptop, I would say to contact Microsoft. You can also go to them using their Microsoft Community Forums. They may still have some steps that will help you get in the Windows operating system on your laptop.

  Please click the button of acceptable Solution to allow others to easily find the steps that can help or contact information.

  If you do not want to say thanks, please click Thumbs Up .

  Good luck!

  Take care

• Laptop does not accept the password after Windows update

  Last Thursday my computer set up regular updates as usual.  When I restarted the computer, it cannot accept my password to complete the start-up operation.  I checked that I had the correct password and caps was off.  Now cannot access the laptop at all.  It is configured with Windows Vista, is a computer dell laptop and I bought it at the beginning of 2009. It seems that I never put a password reset disk and I don't have the original installation disc of vista with me - it all happened to be loaded.  Tips to get again access my laptop?

  Hello

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion 15 laptop: HP Pavilion 15 computer PC2170 laptop does not boot to Windows - 2 years

  Hi, my Hp Pavilion is only 2 years and 2 months (not very old at all) but suddenly it does not start in Windows, it hangs at the HP logo screen, it starts with an HP logo screen then goes to another screen of the HP logo, and then freezes. I can't get into safe mode.  I got in the Hp diagnostic screens and I conducted tests on all and everything.

  I did a hard reset, still frozen.

  I removed the cover, he went out and placed him in, still nothing.

  Whenever I have to try and reset it, he said administrative privileges is necessary, but there is no administrative privileges on this computer.

  There is no restore point.

  I ran chkdsk via the command prompt and had no error.

  I tried running sfc: scannow but I had which was something in the meantime and could not do.

  The laptop is: laptop HP Pavilion 15 2170

  A6-5200 APU AMD processor

  Can someone computer whizz out there enlighten us on this you problem, please.

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).