Computer will not recognize an external microphone

Similar Questions

• Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

  Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

  Creation 2007
  Last updated on 2003
  2010
  Any help would be appreciated.

  Mahalo,

  Philippe

  Ran the Scan, the system is secure.

  I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

  Thank you for your help and attention.

  Mahalo,

  Philippe

• computer does not recognize my external hard drive, how to fix

  my computer does not recognize my external hard drive and need to know how to fix it. I need to access files on the hard drive. AS SOON AS POSSIBLE

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Step 1:

  Go to Device Manager and check if the hard drive is it recognized.

  Step 2:
  Go check and management disk if the hard drive is recognized, if so, then try changing the drive letter and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2:
  Try to run this under fixit and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Also check out this link:
  http://support.Microsoft.com/kb/948911

  It will be useful.

• computer will not install an external hard drive.

  my computer does not recognize my external hard drive enclosure. I went to fry and the internal hard drive and the speaker works. I brought my computer to a friend's House and he read it to his house. It turns out that I had to put the jumpers on CSEL. When I got home and tried to plug it in, it won't read it again. I tried to troubleshoot it and he said that my mass storage device has a problem with the drivers. the thing is, he worked at the House of my friend with my computer. I do not understand and it makes me crazy. the only difference is that the reader reads to my friend's House and won't be at the mine.

  Hi danny,

  Did you use the same cables in your home that have been used in your friends?

  The physical location being the only variable might mean that a wire or cable is loose.

  The reader must be reinstalled in the hard disc enclosure.

  I recommend that you check for loose connections.

  Your PC is connected to Internet at your friend's House?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer will not recognize Pro Duo or removable drives.

  Computer Vista will not read my Pro Duo chip, or it will show all removable drives except ROM USB where I have an optical mouse wirelesss connected (when I check my computer).  The import wizard shows only a USB where prior that he showed, f, g, h, etc.

  Thank you.

  Thank you for these two answers, unfortunately the first did not work, and the second deals with USB.  The computer will not recognize any location chip memory, they do not appear on the Import Wizard, or MY computer.  The only two drives that appear are drive C and drive J, which is where I have a wireless mouse hooked up.   Just before this problem I had... and still not... a bottom of screen message "one of the USB devices attached to this computer has malfunctioned... Click this message for more information."  The only connected usb is the mouse, and it works fine.  Solutions that deal with USB issues aren't really questions I have, except that in the future (if the problem remains) USB ports do not appear on my computer either.  Someone who has some said knowledgge I need to re - map the hard drive, or something?

  I really appreciate the time you people consume with it.  Any other ideas?

• Satellite L750 does not recognize an external microphone

  My laptop does not recognize any external audio input device plugged into the mic port.

  I have a Satellite L750 running Windows 7 with the Conexant HD Audio Smart.

  I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal mic.

  When I go into the sound properties, under the recording tab, it is only the internal mic. There is no option for an external mic.

  I tried updating the driver for sound card, remove the card driver sound and re - install, check all the properties under sound properties, but there is no option for the external microphone.

  I tried Googling the problem but nobody seems to have a viable solution.

  Please can someone help me get the laptop to recognize an external mic.

  > I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal microphone

  Start a test: take an external microphone, connect it to the laptop and use a Windows 7 Audio Recorder utility (can be found in all programs-> Accessories) to record an audio sample.

  Is this possible?

  I think that the microphone that appears in the control-> audio-> recording tab panel is the external microphone jack.
  You can also click right in the recording tab and must mark the options: show disconnected devices and devices to see the disabled.

  By the way: find an old thread you created here on the similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=69099
  I advise to use only a single thread to continue the discussions.

• Computer does not recognize LaCie external hard drive when it is connected.

  Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.

  The device is a hard drive (250 gb) bought in 2006.   LaCie support has provided relevant solutions.

  I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.

  I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.

  I have disabled the Windows Firewall.

  The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).

  Thank you very much for your help.

  Thanks for the reply.

  In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.

  So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.

  It worked for me.

  Thanks again for the reply!

• Computer does not recognize Toshiba external 500G HDD - HARD drive

  Sorry, I use a translator, because all the illiterate

  A year and a half used the hard drive, and now the computer does not recognize it, the TV too.
  In Device Manager, it is there, but says "initialization error".

  What should do?
  Thanks for the replies

  You have partitions software installed on the laptop you?
  I guess that the HARD disk does not appear in windows Explorer, but common partition as the partition Wizard tool might be able to recognize the HARD drive.
  You can try to format the HARD disk and to create the new NTFS partition.

  Another solution:
  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• computer will not recognize vx 5000 webcam

  After downloading the software, the computer does not recognize the lifecam vx 5000.

  Did you follow the steps described here? http://support.Microsoft.com/kb/929087

• Need dvd rom to install, computer will not recognize dvd rom.

  I'm doing a clean install of windows 7 on my laptop. The old onehard drive is totally dead so im from new. Once I have spend assigning U.S. and English at all, it says that I need to install a driver for the DVD burner in order to move forward. It will not find the driver, or make a list of your choice. Can I use a dvd - rom external USB? It will be same which recognizes? Don't want to lose $50 for nothing.

  I'm doing a clean install of windows 7 on my laptop. The old onehard drive is totally dead so im from new. Once I have spend assigning U.S. and English at all, it says that I need to install a driver for the DVD burner in order to move forward. It will not find the driver, or make a list of your choice.

  Can I use a dvd - rom external USB? It will be same which recognizes? Don't want to lose $50 for nothing.

  Yes, it should work, you will need to set it up in the BIOS so.

  Another option is to create a bootable USB key with the installation files.

• Computer will not recognize USB printers

  Original title: no USB connection recognized computer to the printer

  I use windows 7 64-bit. I use a HP Deskjet 2050 for 3 years... all of a sudden he says computer is not connected to the printer. I uninstalled and reinstalled the printer drivers, still nothing. I bought a new printer and the computer still does not recognize a USB connection of the computer to the printer (HP Officejet 2620).

  Michelle,

  Thank you for keeping us posted.

  I'd like you to try this article-

  http://support.Microsoft.com/kb/2654149/en-us

  Please let us know if that helps.

• Computer will not recognize Canon Powershot SX30 IS camera

  I just upgraded to a new computer. Operating system is Windows 7.  It does not recognize my camera. I tried I go through start to computer (not found).  Cannot find under Device Manager either. Nothing. I guess I need a new driver downloaded, but when I go to the Canon Website, it tells me that no driver is needed for Windows 7.

  I'm not an expert in computer science (and not by a long shot). I tried 2 different USB cables, the two nothing helps. I also found a previous thread for the Canon Rebel camera, but the menus on both cameras are different, is not applicable for my camera. Everyone is the same experience? Any suggestions? I can put the card directly qinto the computer, but it does not work underground with the photos in the same way - thus suggesting a card reader is not really solve my problem.
  I have already installed the installation CD and everything seems to have loaded correctly. However, as soon asI connect the camera to the USB port - nothing happens. It worked fine (literally just a fe minutes before on the old Windows XP system (it worked flawlessly in fact).) Not sure what the glitch is on it.  Anyone?

  Hello

  Do you get any error messages?
  Method 1:
  I suggest you run the troubleshooter and check.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  Method 2:
  If the problem is not resolved you can manually install the program in a mode of compatibility with control.
  copy and save the content of the software CD on the desktop in a new folder.
  b. right-click on the program's installation file and click Properties.
  b. click on the tab compatibility.
  c. under compatibility mode section, check check "run this program in compatibility mode for" and select "Windows XP Service Pack 2" in the drop-down list. "
  d. under "privilege level" section, check the brand "run this program as Administrator"
  e. click ok to apply the changes.
  f. open file and install it.

  See the link: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 3:
  If the problem persists, you can select the correct operating system version and try to install the drivers and software provided in the following link:
  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/other_powershot/powershot_sx30_is#DriversAndSoftware

  If the problem persists I suggest you to contact Canon Support.
  http://www.Canon.com/support/

  I hope this information helps!

• computer will not recognize new helmet

  OK, so I got a logitec headset cord broke, so I went and bought a headset not expensive gigaware, and which lasted a bit, until this week, where that string broken too, so I've just went to target and got another logitec headset, but when I'm home and plugged, the habit of my computer recognize that any audio device is plugged...?

  Hello

  1. how you connect the head phone to the computer?

  2 have you tried to use the same phone head on another computer and check?

  Method 1.

  This occurs when you have external speakers, by default. We need to put the headset as default.
  Perform the task mentioned to set the headphones as default:
  a. Click Start, and click Control Panel.
  b. click sound, and then a new window will open.
  (c) in the new window click on the tab 'Read' and right-click in the window and click Show disabled devices.
  d. check if headphones are listed and then right-click on it and choose activate.
  e. Select this headset, and then click "Set as default".

  Method 2:

  Check with the volume settings and if it helps:
  (a) right click on the speaker icon in the taskbar, then select volume control options.
  (b) check on "all devices evolving sound.
  (c) make sure that you have "Default uncontrolled communication device".
  (d) place a check on the speakers and headphones.

  Method 3.

  a. right click your sound icon.
  b. click playback devices.
  c. right-click on the reading tab.
  d. click Show disabled devices.
  e. right click on the playback tab.
  f. click Show disconnected devices.

  Method 4.

  check your connection. The most likely source of a complete cessation of the features is loose or unplugged connection. Make sure that the USB cable is correctly plugged into the USB port on your computer and do not move when shaken slightly.

  b make sure that the headset is selected as audio device by default. When a device is listed as a default value, it automatically will be used, even when the other output (such as speakers or a secondary microphone) devices exist. To make your audio/line-in helmet device by default in Windows XP, go to (accessible via the menu 'Start') Control Panel then click on the link "Sounds and Audio devices" and click the tab "Audio". Then under the headings "Audio playback" and "Voice recording", select your headset in the drop-down list. Then the same things in the "Audio" tab click the 'OK' button to save the changes.

  c check the status of the driver. Device drivers are small pieces of software that facilitate communication between computers. To check your device drivers, go to the Control Panel, select 'System' then go to the 'Material' on 'Device Manager' tab and go to the section of sound, video and game controllers. Click on the yellow arrow to show installed audio and audio devices. If you see your device listed, your drivers are up to date. If your device is not listed, or it has a yellow exclamation mark next to it, you need to reinstall or update your drivers. See Manual of the owner of your headset for more information about how to install the drivers for your specific model.

  I hope this helps.

• Computer will not recognize new keyboard, KU-0841 in Vista

  The other day, I bought a new key board and I'll have a lot of problems when trying to use it.
  First of all I can't download his material, which means I can't even recognize the keyboard of the computer. I've tried everything I can think of, but I still can't get it to work. This model KU-0841. If anyone can offer advice on how to get this keyboard to work, I would really appriciate it. : D

  My new keyboard is having some major issues regarding the material and use

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should you do to the keyboard at least and all others you have time to do - they help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. Make sure driver debice arises and is functioaing properly.

  Are you sure that the keyboard is compatibble with your version of Vista? http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  The old stilll keyboard works fine on the computer?  Have you tried the new keyboard on another computer to see if it works there?

  Who is the manufacturer of the keyboard?  Does it come with the firmware or software tha must also be installed?

  Go to start / Control Panel / Add Hardware and have the system search and install a new hardware it finds.  It can find and install your keyboard.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer will not recognize the installation startup disk upward

  Ive already installed my cd/dvd drive as my first boot in the BIOS. However, I have never enter the setup and go straight to start windows again (I am trying to reinstall windows 7). any advice?

  Go into the BIOS to start the computer and change the setting from IDE to AHCI.  This allows Windows 7 to recognize the SATA CD or DVD ROM drive you dΘmarrez since and it should install.

  This probably won't work if your CD/DVD-ROM is not a SATA drive.
  ----------------

  What is a digital download of Windows 7 you burned? If it is not burned properly (for example, simply copy the installation files to the disk) without the necessary start-up information, Windows 7 does not start from the disc.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP