Computer will not recognize Pro Duo or removable drives.

Similar Questions

• trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

  trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

  See if this helps:-

  http://www.ComputerActive.co.UK/CA/download-review/2040736/remove-unwanted-software-Revo-Uninstaller-19

  If she please vote as helpful.

  I use the software that you want to remove and would recommend not removing it because 2 times last year he picked up the items that Microsoft Security Essentials does not.

• Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

  Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

  Creation 2007
  Last updated on 2003
  2010
  Any help would be appreciated.

  Mahalo,

  Philippe

  Ran the Scan, the system is secure.

  I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

  Thank you for your help and attention.

  Mahalo,

  Philippe

• Why my computer will not pick up my external hard drive?

  Why my computer will not pick up my external hard drive?
  using Windows 7 sp1

  Original title: usb

  Hello Fred,.

  Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

  1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

  2 do a reset power coercive.

  1. Unplug the power cord. Then (on a laptop) remove the battery.
  2. Unplug all USB devices.
  3. Leave it alone - don't connect or reconnect the devices for several minutes.
  4. After several minutes plug the power supply cord.
  5. Then install the battery.
  6. Turn on the computer and restart as normal without plug any USB device.
  7. Connect your devices one at a time and let them install as usual.

  The external hard drive works now? If not, go to #3.

  3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

  I would like to know if one of these methods works for you. After back here with your results.

  Kind regards

  BearPup

• computer will not recognize vx 5000 webcam

  After downloading the software, the computer does not recognize the lifecam vx 5000.

  Did you follow the steps described here? http://support.Microsoft.com/kb/929087

• Historical files Windows 8 will not recognize the new external hard drive

  I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

  I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

  I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

  I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.

• computer does not recognize a dvd in the drive

  Hello

  My computer does not recognize the presence of a dvd in one of my two drives, although she acknowledges a CD.  This happens regardless of what dvd I insert.

  Thank you very much

  PAM

  Try this;  Restart your computer before trying again the disc that plays on your DVD player.  If this does not work then there is only one possibility;  your DVD drive is DEAD and you need to replace it, or buy an external CD/DVD drive.    He comes to the end of the mystery.

• Computer will not recognize USB printers

  Original title: no USB connection recognized computer to the printer

  I use windows 7 64-bit. I use a HP Deskjet 2050 for 3 years... all of a sudden he says computer is not connected to the printer. I uninstalled and reinstalled the printer drivers, still nothing. I bought a new printer and the computer still does not recognize a USB connection of the computer to the printer (HP Officejet 2620).

  Michelle,

  Thank you for keeping us posted.

  I'd like you to try this article-

  http://support.Microsoft.com/kb/2654149/en-us

  Please let us know if that helps.

• Need dvd rom to install, computer will not recognize dvd rom.

  I'm doing a clean install of windows 7 on my laptop. The old onehard drive is totally dead so im from new. Once I have spend assigning U.S. and English at all, it says that I need to install a driver for the DVD burner in order to move forward. It will not find the driver, or make a list of your choice. Can I use a dvd - rom external USB? It will be same which recognizes? Don't want to lose $50 for nothing.

  I'm doing a clean install of windows 7 on my laptop. The old onehard drive is totally dead so im from new. Once I have spend assigning U.S. and English at all, it says that I need to install a driver for the DVD burner in order to move forward. It will not find the driver, or make a list of your choice.

  Can I use a dvd - rom external USB? It will be same which recognizes? Don't want to lose $50 for nothing.

  Yes, it should work, you will need to set it up in the BIOS so.

  Another option is to create a bootable USB key with the installation files.

• Computer will not recognize Canon Powershot SX30 IS camera

  I just upgraded to a new computer. Operating system is Windows 7.  It does not recognize my camera. I tried I go through start to computer (not found).  Cannot find under Device Manager either. Nothing. I guess I need a new driver downloaded, but when I go to the Canon Website, it tells me that no driver is needed for Windows 7.

  I'm not an expert in computer science (and not by a long shot). I tried 2 different USB cables, the two nothing helps. I also found a previous thread for the Canon Rebel camera, but the menus on both cameras are different, is not applicable for my camera. Everyone is the same experience? Any suggestions? I can put the card directly qinto the computer, but it does not work underground with the photos in the same way - thus suggesting a card reader is not really solve my problem.
  I have already installed the installation CD and everything seems to have loaded correctly. However, as soon asI connect the camera to the USB port - nothing happens. It worked fine (literally just a fe minutes before on the old Windows XP system (it worked flawlessly in fact).) Not sure what the glitch is on it.  Anyone?

  Hello

  Do you get any error messages?
  Method 1:
  I suggest you run the troubleshooter and check.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  Method 2:
  If the problem is not resolved you can manually install the program in a mode of compatibility with control.
  copy and save the content of the software CD on the desktop in a new folder.
  b. right-click on the program's installation file and click Properties.
  b. click on the tab compatibility.
  c. under compatibility mode section, check check "run this program in compatibility mode for" and select "Windows XP Service Pack 2" in the drop-down list. "
  d. under "privilege level" section, check the brand "run this program as Administrator"
  e. click ok to apply the changes.
  f. open file and install it.

  See the link: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 3:
  If the problem persists, you can select the correct operating system version and try to install the drivers and software provided in the following link:
  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/other_powershot/powershot_sx30_is#DriversAndSoftware

  If the problem persists I suggest you to contact Canon Support.
  http://www.Canon.com/support/

  I hope this information helps!

• computer will not recognize new helmet

  OK, so I got a logitec headset cord broke, so I went and bought a headset not expensive gigaware, and which lasted a bit, until this week, where that string broken too, so I've just went to target and got another logitec headset, but when I'm home and plugged, the habit of my computer recognize that any audio device is plugged...?

  Hello

  1. how you connect the head phone to the computer?

  2 have you tried to use the same phone head on another computer and check?

  Method 1.

  This occurs when you have external speakers, by default. We need to put the headset as default.
  Perform the task mentioned to set the headphones as default:
  a. Click Start, and click Control Panel.
  b. click sound, and then a new window will open.
  (c) in the new window click on the tab 'Read' and right-click in the window and click Show disabled devices.
  d. check if headphones are listed and then right-click on it and choose activate.
  e. Select this headset, and then click "Set as default".

  Method 2:

  Check with the volume settings and if it helps:
  (a) right click on the speaker icon in the taskbar, then select volume control options.
  (b) check on "all devices evolving sound.
  (c) make sure that you have "Default uncontrolled communication device".
  (d) place a check on the speakers and headphones.

  Method 3.

  a. right click your sound icon.
  b. click playback devices.
  c. right-click on the reading tab.
  d. click Show disabled devices.
  e. right click on the playback tab.
  f. click Show disconnected devices.

  Method 4.

  check your connection. The most likely source of a complete cessation of the features is loose or unplugged connection. Make sure that the USB cable is correctly plugged into the USB port on your computer and do not move when shaken slightly.

  b make sure that the headset is selected as audio device by default. When a device is listed as a default value, it automatically will be used, even when the other output (such as speakers or a secondary microphone) devices exist. To make your audio/line-in helmet device by default in Windows XP, go to (accessible via the menu 'Start') Control Panel then click on the link "Sounds and Audio devices" and click the tab "Audio". Then under the headings "Audio playback" and "Voice recording", select your headset in the drop-down list. Then the same things in the "Audio" tab click the 'OK' button to save the changes.

  c check the status of the driver. Device drivers are small pieces of software that facilitate communication between computers. To check your device drivers, go to the Control Panel, select 'System' then go to the 'Material' on 'Device Manager' tab and go to the section of sound, video and game controllers. Click on the yellow arrow to show installed audio and audio devices. If you see your device listed, your drivers are up to date. If your device is not listed, or it has a yellow exclamation mark next to it, you need to reinstall or update your drivers. See Manual of the owner of your headset for more information about how to install the drivers for your specific model.

  I hope this helps.

• Computer will not recognize new keyboard, KU-0841 in Vista

  The other day, I bought a new key board and I'll have a lot of problems when trying to use it.
  First of all I can't download his material, which means I can't even recognize the keyboard of the computer. I've tried everything I can think of, but I still can't get it to work. This model KU-0841. If anyone can offer advice on how to get this keyboard to work, I would really appriciate it. : D

  My new keyboard is having some major issues regarding the material and use

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should you do to the keyboard at least and all others you have time to do - they help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. Make sure driver debice arises and is functioaing properly.

  Are you sure that the keyboard is compatibble with your version of Vista? http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  The old stilll keyboard works fine on the computer?  Have you tried the new keyboard on another computer to see if it works there?

  Who is the manufacturer of the keyboard?  Does it come with the firmware or software tha must also be installed?

  Go to start / Control Panel / Add Hardware and have the system search and install a new hardware it finds.  It can find and install your keyboard.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer will not recognize an external microphone

  When I click with the right button on the audio button and select recording devices, only my internal microphone comes even though I have an external microphone plugged.  Can you please tell me how to get the computer to recognize the microphone?  I'm on Windows 8.1, and it is a Dell Inspiron 15, 5000 series.

  Thank you!

  Thank you.  Yes, it's a 5547.  Then I will try to download the driver from Realtek.  Also, I had no idea there were microphones with different numbers of segments.  Wow!

• computer will not recognize the installation startup disk upward

  Ive already installed my cd/dvd drive as my first boot in the BIOS. However, I have never enter the setup and go straight to start windows again (I am trying to reinstall windows 7). any advice?

  Go into the BIOS to start the computer and change the setting from IDE to AHCI.  This allows Windows 7 to recognize the SATA CD or DVD ROM drive you dΘmarrez since and it should install.

  This probably won't work if your CD/DVD-ROM is not a SATA drive.
  ----------------

  What is a digital download of Windows 7 you burned? If it is not burned properly (for example, simply copy the installation files to the disk) without the necessary start-up information, Windows 7 does not start from the disc.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Computer will not recognize a second connection of GPIB

  I have two connections to a Tektronix Oscilloscope to TDS210 GPIB and generator features a synthesized Stanford Research Systems. The Oscilloscope is recognized in the measurement and Automation Explorer as GPIB0::1:INSTR, but the device is not recognized as a second instrument. The GPIB card and cables are both OR. I ran through tutorials and troubleshooting on the site OR with no luck. This laboratory has been successfully run a year ago, but between yesterday and today the College cleaned all the computers in the lab. I've updated to LabView 2009 new MAX and new VISAs and drivers for the card GPIB and instruments. It's strange that the system would recognize an instrument but not the other. Any advice or tips? Am I missing something huge?

  Thanks for your help in advance!

  Nicole

  Have you checked that the two instruments are to different addresses? Have you checked that the function generator is configured for GPIB communications? Some instruments can communicate on a bus type more, but sometimes only one can be active. Have you checked if she acknowledged if it is the only one connected? Have you tried swapping cables? Have you tried to change that it is connected to the controller first in the chain?