computer XP is no longer automatically plays CD inserted

Similar Questions

• My computer is no longer automatically recognizes all the devices inserted in the disks.

  My computer is no longer automatically recognizes all the devices inserted into readers, like a CD or SD card photo. Recently I bought a micro sd card for my phone, but when I insert in the USB port, it recognizes that no more. How to do that everything works again. I have XP Service Pack 2

  Hi Danny Bralski,
   
  -Did you change on your computer before this problem?
   
  Follow the steps listed in the order.
   

  Method 1: Check if the USB port is defective.

  If you connect a USB device to a defective port, the device will not work. Try connecting the device to a different port. If all USB ports are in use, disconnect one of the other devices and plug the problematic device into that port.

  Method 2: Check if there is a problem with the device.

  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 3: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Audio CD does not automatically play when the CD is inserted

  I have my settings set to read a CD automatically when the CD is inserted.  I insert an audio CD, and nothing happens.  No music.

  Hello

  Welcome to Windows Vista community responses.

  (1) made audio CD playback with Windows Media Player or any other third party software?

  (2) have you been able to use this feature before? If so what are the recent changes on the computer?

  Windows does not read the CD-Roma automatically if you only use the real-mode CD-ROM drivers. Protected mode drivers are called to play CD-ROMs automatically when you insert them into your CD-ROM drive.

  To manually change your auto CD play settings in Windows Vista

  1. open the control panel by going to the start menu.

  2. double-click on the default programs icon.

  Now choose the third setting down. Change AutoPlay settings.

  

  4. now you can choose which action to perform with which program.
  5. press on the drop-down menu to make your choice.

  

  Response please back and let us know if this helped with your question or let us know if you need more assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Launch of Windows updates is no longer automatically search updates

  Original title: Windows 7 updates

  About 5 months ago, updates of Windows 7 has worked like a charm. I could reboot a computer, install SP1 from the cd and when I launched Windows updates he would find them and there we went. But for the lst 4-5 months it was harder to get updates and for several weeks, it is almost impossible. When I run the application updated Windows he's looking for is no longer automatically updates, I have to say it looks like. Then, the computer can settle there as long as two days before finding the updates. I have two computers with own loads on my bench right now doing so. Once has been looking for updates since Monday afternoon. The others finally fond some yeaterday late but now still looking for more. I tried the tool of Microsoft 'fixit' without change.  What happened to windows update to windows 7? My only guess is that Microsoft has run on a machine Win 98 486 trying to force everyone to go to 10 Windows. It is a totally unacceptable process that needs to be repaired.

  It is expected by M$, now we have to go through hoops
  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If you are looking for an update lock on to a current install

  Switch your windows update setting to never check the updates temporarily

  Restart the machine
  Then you download this from your download folder run from there.
  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not
  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check
  updates before running from the downloads folder.

  Once it installs and restarts
  You can reset your updates affecting everything you had before default =...
  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,
  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You need to scroll down to the poster of Joel SC is the last answer on this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• Comouter is no longer automatically connects to the wireless network.

  Until recent netbook Hannsbook my wife automatically connected to our wireless network when turned on.  We recently took a trip and used a different wireless network.  Back home, he is no longer automatically connect when turned on.  Software Troubleshooting in the Windows 7 Home Premium says he has been "manually disconnected' and it restores the connection.  I deleted all the other networks wireless to the computer.  Page manage wireless networks correctly identifies the network and says it should connect automatically.  BUT IT'S NOT!

  Once connected, the router works fine.  The connection is NOT lost when the computer goes into power saving mode. How do we get to resume its old custom to connect automatically when the computer is powered?  My wife is a technophobe and have to mess around to make the connection can be the drop of water!

  Hi Stuart,

  Do you have an error message when you try to connect to wireless networks?

  Perform the steps suggested by don241 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Answer please if you have any questions.

• My cd rom is no longer automatically opens in media player read a music cd

  My cd rom is no longer automatically opens to media player play a music cd. But if I open the media center I can play manually. I lost a framework?

  Hello

  See the links below:

  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  Change AutoPlay settings
  http://Windows.Microsoft.com/en-us/Windows7/Change-AutoPlay-settings

  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  I hope this helps.

• ShareThis closed tab is no longer automatically in Firefox.

  When I use the ShareThis button in Google Reader, a new tab opens in Firefox. Previously, after hitting the button submit, the tab would close automatically, but after the most recent update, happens more. In fact, the tab repeatedly reloads when I click on submit, sometimes repeatedly posting the same article. Anyone know why the tab no longer automatically closes and how this can be fixed?

  I don't know what has changed in the last 24 hours, but I'm more faced with this problem.

• to turn off a computer that is no longer helping

  How to turn off a computer that is no longer serves to nothing, but in my iTunes account?

  Where is it registered? If article in the "manage devices" then does it have a button 'remove' next to him?

  If you reference the number of authorized computers on your account, with no access to the computer, you can only "deauthorise all ' (you can do only once every 12 months) and then allow the computers you always have: Deauthorize your computer using iTunes - Apple Support

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• Windows defender is stopped. whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  Windows Defender is disabled whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  If you have Microsoft Security Essentials or AVG installed, you don't have to do a thing. These 2 are supposed to disable Windows Defender, because they have their own "defender". Running two defenders would conflict on the other and redundant.

  If you have not installed 2 above. Try this...
  Start bittun > in the search box, type services > press ENTER > uac prompt > scroll down and look for Windows Defender...
  under the State ; It must be said Started
  under Startup type : must say automatic
  If this isn't the case, right click on Windows Defender > properties >
  under the change of automatic startup type to
  under service status to start editing
  Click OK.

  t-4-2

• My computer may take a long time to stop.

  * Original title: Shut down

  My computer off button does not work correctly. My computer may take a long time to stop.

  Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

  http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  There is a lot of noise from speakers as well.

  Disable the hardware accelerator or install flash player 10.

• How can I configure my PCG 61611 laptop to automatically play CDs and DVDs?

  It does nothing when I insert a CD or a DVD. How can I configure t automatically play them when I put them.

  NNNNN,

  Here are the instructions to activate automatic playback. Here is a link with the AutoPlay of Microsoftutility.